描述
NORYL NHP6011 Resin is an 8% glass fiber reinforced blend of polyphenylene ether (PPE) and polystyrene (PS), manufactured by SABIC. This injection moldable grade contains non-brominated, non-chlorinated & non-halogenated flame retardant and carries a UL94 flame rating of V-0 at 1.5mm for thin-wall molding capability, along with a CTI 2 rating. The material is based on a unique co-polymer technology developed by SABIC.
NORYL NHP6011 Resin exhibits high impact, high heat resistance, good dimensional stability, hydrolytic stability, strong electrical performance, low moisture absorption and very low specific gravity. It also offers high flow, good stiffness, low creep sensitivity and low warpage. This material is an excellent candidate for electrical vehicle (EV) battery modules/housings where thin-wall flame retardancy and high heat resistance are required.
Physical property data is determined using test methods established by ISO and ASTM International, the globally recognized standards organizations.
For more NORYL grades and technical information, please visit our PPO/PPE product page.
Key Features of NORYL NHP6011 Resin
-
8% Glass Fiber Reinforced – Provides enhanced stiffness, strength, and dimensional stability
-
UL94 V-0 at 1.5mm – Achieves V-0 flame rating at 1.5mm thickness for thin-wall molding capability
-
Halogen-Free Flame Retardant – Non-brominated, non-chlorinated & non-halogenated flame retardant system
-
CTI 2 Rating – Excellent comparative tracking index for electrical applications
-
High Impact Resistance – Excellent impact strength for demanding applications
-
High Heat Resistance – HDT of 130°C at 1.82 MPa (3.2mm)
-
Dimensional Stability – Precise part geometry with low warpage
-
Hydrolytic Stability – Resists degradation in wet environments; better moisture resistance compared to polyamide
-
Strong Electrical Performance – CTI 2 rating and excellent dielectric performance
-
Low Moisture Absorption – 0.05% at 23°C / 50% RH (equilibrium)
-
Very Low Specific Gravity – Density of 1.16 g/cm³
-
High Flow – Excellent moldability for thin-wall applications
-
Good Stiffness – Flexural modulus of 3,000 MPa
-
Low Creep Sensitivity – Maintains dimensional integrity under sustained load
-
Low Warpage – Minimizes deformation during processing and use
-
RoHS Compliant – Meets global environmental standards
-
Injection Moldable – Suitable for standard injection molding processes
Typical Applications for NORYL NHP6011 Resin
| Industry | Typical Components & Considerations |
|---|---|
| Electric Vehicles | EV battery modules, housings – UL94 V-0, thin-wall FR, high impact, high heat resistance |
| Electric Vehicles | Battery cell frames, retainers, top covers – thin-wall design, dimensional stability |
| Electrical & Electronics | Components requiring CTI 2 rating – strong electrical performance, flame retardancy |
| Automotive | Underhood components – high heat resistance, dimensional stability |
| Consumer Electronics | Thin-wall housings – low warpage, high flow |
Typical Properties of NORYL NHP6011 Resin
| Property | Value | Test Method |
|---|---|---|
| Physical | ||
| Density / Specific Gravity | 1.16 g/cm³ | ISO 1183 / ASTM D792 |
| Moisture Absorption (23°C/50% RH, Equilibrium) | 0.05% | ISO 62-4 |
| Water Absorption (23°C, 24 hrs) | 0.1% | ASTM D570 |
| Water Absorption (23°C, Saturated) | 0.2% | ISO 62-1 |
| Linear Mold Shrinkage, Flow (3.2mm) | 0.5 – 0.7% | SABIC Method |
| Linear Mold Shrinkage, Transverse (3.2mm) | 0.5 – 0.7% | SABIC Method |
| Melt Volume Rate (MVR) (280°C/10.0kg) | 15 cm³/10min | ISO 1133 |
| Mechanical (ISO) | ||
| Tensile Modulus (1 mm/min) | 3,300 MPa | ISO 527 |
| Tensile Stress, Break (5 mm/min) | 75 MPa | ISO 527 |
| Tensile Strain, Break (5 mm/min) | 3% | ISO 527 |
| Flexural Modulus (2 mm/min) | 3,000 MPa | ISO 178 |
| Flexural Strength (2 mm/min) | 115 MPa | ISO 178 |
| Ball Indentation Hardness (H358/30) | 161 MPa | ISO 2039-1 |
| Hardness, Rockwell M | 71 | ISO 2039-2 |
| Impact (ISO) | ||
| Charpy Unnotched Impact (+23°C) | 35 kJ/m² | ISO 179/1eU |
| Charpy Unnotched Impact (-30°C) | 35 kJ/m² | ISO 179/1eU |
| Charpy Notched Impact (+23°C) | 10 kJ/m² | ISO 179/1eA |
| Charpy Notched Impact (-30°C) | 6 kJ/m² | ISO 179/1eA |
| Izod Unnotched Impact (+23°C, 4mm) | 35 kJ/m² | ISO 180/1U |
| Izod Unnotched Impact (-30°C, 4mm) | 35 kJ/m² | ISO 180/1U |
| Izod Notched Impact (+23°C, 4mm) | 10 kJ/m² | ISO 180/1A |
| Izod Notched Impact (-30°C, 4mm) | 6 kJ/m² | ISO 180/1A |
| Mechanical (ASTM) | ||
| Tensile Modulus (5 mm/min) | 3,300 MPa | ASTM D638 |
| Tensile Stress, Break (Type I, 5 mm/min) | 75 MPa | ASTM D638 |
| Tensile Strain, Break (Type I, 5 mm/min) | 3% | ASTM D638 |
| Flexural Modulus | 3,000 MPa | ASTM D790 |
| Thermal | ||
| HDT, 1.82 MPa (3.2mm, unannealed) | 130°C | ASTM A648 |
| Vicat Softening Temperature (Rate B/50) | 139°C | ASTM D1525 |
| Flammability | ||
| Flame Rating (1.5 – 3.00 mm) | V-0 | UL 94 |
| Glow Wire Flammability Index (GWFI) | 960°C (1.5mm) | IEC 60695-2-12 |
| Comparative Tracking Index (CTI) | 2 | UL 746A |
| UL Yellow Card | E207780-104507609 | UL |
Important Notes on Typical Data:
Values listed are typical and sourced from manufacturer data sheets. They do not constitute binding product specification.
Batch-to-batch deviations may exist. For critical applications, validate performance with batch-specific COA certificate.
Final performance depends on processing conditions and part design.
Manufacturer official TDS shall serve as definitive technical reference. Request the latest official TDS from our sales team.
Processing Guidelines for NORYL NHP6011 Resin
| Step | Process |
|---|---|
| Processing Method | Injection molding |
| Drying Temperature | 105 – 110°C |
| Drying Time | 3 – 4 hours |
| Drying Time (Cumulative) | 8 hours |
| Melt Temperature | Refer to full TDS |
| Mold Temperature | Refer to full TDS |
| Storage | Store in original, sealed packaging in a cool, dry place away from direct sunlight |
Critical Processing Warnings:
Drying: Proper drying is critical to prevent hydrolysis and achieve optimal mechanical properties.
Injection Molding: NORYL NHP6011 is specifically designed for injection molding.
Glass Reinforcement: This grade contains 8% glass fiber, which may require processing adjustments for optimal surface finish and fiber orientation.
UL Compliance: This grade carries a UL94 V-0 rating from 1.50mm to 3.00mm thickness. Ensure processing conditions maintain compliance.
Thin-Wall FR Performance: This grade is specifically formulated for thin-wall flame retardant applications. Verify wall thickness requirements for UL94 V-0 compliance.
Storage: Store in original, sealed packaging in a cool, dry place away from direct sunlight.
Related Products
Explore Engineering Plastics – Browse all engineering plastic materials
About Our Company – Learn more about our supply capabilities and quality assurance
Technical Documents for NORYL NHP6011 Resin
| Document Type | Description & Source |
|---|---|
| Manufacturer Official TDS | Complete physical, thermal, and mechanical properties of NORYL NHP6011 |
| Manufacturer Official SDS | GHS-compliant safety documentation |
| COA (Certificate of Analysis) | Batch-specific quality certification |
| UL Yellow Card | E207780-104507609 – UL safety certification |
Request any document above by:
Email: ruiqingchem@gmail.com
Online form: Our contact page
We reply within one working business day. Please clearly state product (NORYL NHP6011) and document type you require.
FAQ about NORYL NHP6011 Resin
Q1: What is NORYL NHP6011?
A: NORYL NHP6011 is an 8% glass fiber reinforced blend of polyphenylene ether (PPE) and polystyrene (PS) from SABIC. It is an injection moldable grade with non-halogenated flame retardancy, UL94 V-0 rating at 1.5mm, CTI 2, high impact, high heat resistance, dimensional stability, hydrolytic stability, strong electrical performance, low moisture absorption, and very low specific gravity.
Q2: What are the key features of NORYL NHP6011?
A: It offers 8% glass reinforcement, halogen-free flame retardancy (UL94 V-0 at 1.5mm), CTI 2, high impact strength, high heat resistance (HDT 130°C), dimensional stability, hydrolytic stability, strong electrical performance, low moisture absorption (0.05%), very low specific gravity (1.16 g/cm³), high flow, good stiffness (flexural modulus 3,000 MPa), low creep sensitivity, and low warpage.
Q3: What are the typical applications for NORYL NHP6011?
A: Typical applications include electric vehicle (EV) battery modules and housings, battery cell frames, retainers, top covers, automotive underhood components, and thin-wall electrical components.
Q4: What is the flame rating of NORYL NHP6011?
A: UL94 V-0 from 1.50mm to 3.00mm thickness.
Q5: Is NORYL NHP6011 halogen-free?
A: Yes, it contains non-brominated, non-chlorinated & non-halogenated flame retardant.
Q6: What is the CTI rating of NORYL NHP6011?
A: The Comparative Tracking Index (CTI) is 2.
Q7: What is the recommended processing method for NORYL NHP6011?
A: NORYL NHP6011 is designed for injection molding.
Q8: What is the recommended drying condition for NORYL NHP6011?
A: Dry at 105 – 110°C for 3 – 4 hours prior to processing.
Q9: What is the UL Yellow Card number for NORYL NHP6011?
A: E207780-104507609.
Q10: What regions is NORYL NHP6011 available in?
A: Africa, Asia / Pacific, Central and Eastern Europe, Middle East and Central Asia, North America, South and Central America, and Western Europe.
Q11: What is the lead time for orders?
A: Regular orders ship within 7-10 working days after payment confirmation. Large-volume orders can be negotiated separately.
CTA (Call to Action)
Ready to order NORYL NHP6011?
To get a precise quotation and professional technical support, please share:
-
Required quantity (kg)
-
Destination port or delivery address
-
Target application (EV battery modules, housings, thin-wall components, etc.)
-
Document requirement (TDS, SDS, COA, UL docs, etc.)
Sample Policy:
-
Samples are for laboratory validation tests only, not for production use.
-
Buyer bears international sample-shipping freight.
-
If bulk-product performance deviates from sample reference, manufacturer official TDS serves as the authoritative benchmark.
Take action now:
-
📧 Email Us – ruiqingchem@gmail.com
-
📝 Send Inquiry – Use our quick inquiry form
-
💬 Live Chat – Click the bottom-right chat widget to speak directly with our team
After-Sales Support
| Service | Details |
|---|---|
| Quality Inspection Period | All quality-related claims must be submitted within 7 working days after delivery, supported by test data and photographic evidence. |
| Return / Exchange Policy | Confirmed product defects caused by our side trigger replacement or refund. Terms and conditions apply. |
| Logistics Damage | Report shipping damage directly to carrier immediately upon goods receipt. We assist with claim-document preparation. |
| Technical Support | Remote technical guidance available. On-site troubleshooting can be arranged upon special request. |
| Export Documentation | We supply commercial invoice, packing list, bill of lading, COA, and additional compliance certificates on request. |
Disclaimer
DISCLAIMER: All technical data is referenced from original manufacturer typical values for NORYL NHP6011. Our company acts as authorized distributor/trader rather than original manufacturer. Final performance depends on processing conditions and part design. Buyers shall independently validate product suitability for individual applications. Our firm bears no liability for product failure caused by improper processing or improper usage. Always reference the latest manufacturer official TDS of NORYL NHP6011 as the definitive specification.
