ULTEM AUT200 – High Flow Automotive Lighting Grade PEI Resin

ULTEM Resin AUT200 is a high flow, transparent, flame retardant amorphous polyetherimide (PEI) resin manufactured by SABIC. As an authorized distributor and trader, we supply genuine SABIC materials with full traceability.

ULTEM AUT200 is a specialty automotive grade specifically engineered for automotive lighting applications where highly metallized, reflective surfaces are required. It is a transparent high flow Polyetherimide (Tg 217°C) with very low outgassing and plateout.

ULTEM AUT200 sets a benchmark in automotive reflector applications by delivering exceptional thermal stability and superior melt strength, ensuring dimensional precision even under the extreme heat and pressure cycles of headlamps. Its inherent rigidity and resistance to creep allow the resin to maintain complex reflector geometries, sharp angles, and fine surface textures without distortion. Thanks to its naturally low moisture absorption, it provides consistent optical clarity and metallization quality across manufacturing cycles. Moreover, ULTEM AUT200 offers excellent UV resistance and long-term dimensional stability, making it ideally suited for components exposed to intense light sources and environmental stress.

Key attributes include:

• Haze Onset Temperature of 204°C – Maintains optical clarity and reflective performance at elevated temperatures

• High Flow – Excellent flow characteristics for thin-wall molding down to 1.2 mm

• Flame Retardant – Inherently flame retardant without additives

• Excellent Metallization Compatibility – Formulated for superior metal adhesion and reflectivity

• High Heat Resistance – Glass transition temperature (Tg) of 217°C

• Very Low Outgassing & Plateout – Minimizes contamination of metallization equipment

• ISCC+ Certified Bio-Based Version – Sustainable renewable bio-based solutions available

• Low Smoke & Toxicity – Low toxicity, smoke and flame evolution

• High Stiffness & Strength – Excellent mechanical properties across a broad temperature range

• Excellent Dimensional Stability – Low shrinkage, low creep sensitivity, good dimensional stability

• Good Chemical & Hydrolytic Stability

• Electroplatable – Suitable for decorative or functional metal finishes

• PFAS-Free – No PFAS intentionally added

Key Features of ULTEM AUT200

• Haze Onset at 204°C – Maintains optical clarity and reflective performance at elevated temperatures; ensures consistent light output in automotive lighting

• High Flow PEI – Exceptional flow characteristics for processing complex, thin-walled automotive lighting components; thin-wall molding down to 1.2 mm

• Automotive Lighting Grade – Specifically engineered for automotive exteriors and lighting applications where highly metallized, reflective surfaces are required

• Excellent Metallization Compatibility – Formulated for superior metal adhesion and reflectivity; very low outgassing and plateout minimize contamination of metallization equipment

• Flame Retardant – Inherently flame retardant without additives

• High Heat Resistance – Glass transition temperature of 217°C

• High Stiffness & Strength – Tensile modulus of 3,590 MPa (ASTM) / 3,200 MPa (ISO); tensile yield strength of 110 MPa (ASTM)

• Excellent Dimensional Stability – Low shrinkage; low creep sensitivity; high dimensional stability supports efficient assembly of electronic components

• Good Chemical & Hydrolytic Resistance – Excellent resistance to many chemicals and moisture

• Low Smoke & Low Toxicity – Low toxicity, smoke and flame evolution

• Good Metal Adhesion – Suitable for applications requiring metal bonding and metallized reflective surfaces

• Transparent – Transparent grade with all colors customizable via ColorXpress

• ISCC+ Certified – Renewable bio-based solutions available

• ECO Conforming – Meets environmental compliance standards

• PFAS-Free – No PFAS intentionally added during manufacturing

• Electroplatable – Can be electroplated for decorative or functional metal finishes

• Versatile Processing – Suitable for injection molding

Typical Applications for ULTEM AUT200

Typical Properties

Important Notes on Typical Data:

• Values listed are typical and sourced from SABIC official data sheets. They do not constitute binding product specification.

• Batch-to-batch deviations may exist. For critical applications, validate performance with batch-specific COA certificate.

• Final performance depends on processing conditions, mold design, and part geometry.

• SABIC official TDS shall serve as definitive technical reference. Request the latest official TDS from our sales team.

Processing Guidelines (Injection Molding)

Critical Processing Warnings:

• Drying: ULTEM AUT200 is hygroscopic and must be dried to <0.02% moisture before processing. Dry at 150°C for 4-6 hours.

• High Flow: This grade offers high flow characteristics for processing complex, thin-walled automotive lighting components.

• Melt Temperature: Recommended melt temperature range is 345-400°C. Avoid excessive residence times to prevent thermal degradation.

• Metallization Considerations: Formulated for very low outgassing and plateout to minimize contamination of metallization equipment and ensure consistent reflective coating quality.

• Gate Design: Use large gates and runners to minimize flow resistance and reduce molded-in stress.

• Regrind: Regrind can be used up to 20-25% with virgin material, provided it is clean and properly dried.

AUT195 vs AUT200 Comparison

Related Products

• Explore PEI / Polyetherimide – Browse all ULTEM PEI resin options

• Explore Engineering Plastics – Browse all engineering plastic materials

• About Our Company – Learn more about our supply capabilities and quality assurance

Technical Documents

Request any document above by:

• Email: ruiqingchem@gmail.com

• Online form: Our contact page

We reply within one working business day. Please clearly state product (ULTEM AUT200) and document type you require.

FAQ

Q1: What is ULTEM AUT200 and what is it used for?
A: ULTEM AUT200 is a high flow, transparent polyetherimide (PEI) resin manufactured by SABIC, specifically engineered for automotive lighting applications where highly metallized, reflective surfaces are required. It is widely used in headlamp reflectors, fog lamp reflectors, bezels, lighting housings, and other automotive exterior components.

Q2: What is the haze onset temperature of ULTEM AUT200?
A: The haze onset temperature is 204°C (SABIC IP method), ensuring optical clarity and reflective performance at elevated temperatures.

Q3: What is the difference between ULTEM AUT195 and AUT200?
A: ULTEM AUT200 offers a higher haze onset temperature (204°C vs 195°C) , higher stiffness (tensile modulus 3,590 MPa) , higher strength (tensile yield 110 MPa) , and is ISCC+ certified with a bio-based version available.

Q4: What is the density of ULTEM AUT200?
A: The density is 1.27 g/cm³.

Q5: Is ULTEM AUT200 flame retardant?
A: Yes. ULTEM AUT200 is inherently flame retardant without additives.

Q6: What is the glass transition temperature of ULTEM AUT200?
A: The glass transition temperature (Tg) is 217°C.

Q7: What is the tensile strength of ULTEM AUT200?
A: Tensile yield strength is 110 MPa (ASTM) / 105 MPa (ISO) ; tensile break strength is 105 MPa (ASTM) / 85 MPa (ISO).

Q8: What is the tensile modulus of ULTEM AUT200?
A: The tensile modulus is 3,590 MPa (ASTM) / 3,200 MPa (ISO).

Q9: What is the Vicat softening temperature of ULTEM AUT200?
A: The Vicat softening temperature (B/50) is 219°C (ASTM) / 211°C (ISO).

Q10: What is the shrinkage of ULTEM AUT200?
A: Mold shrinkage (flow) is 0.50-0.70%.

Q11: What processing methods can be used for ULTEM AUT200?
A: ULTEM AUT200 is suitable for injection molding and can achieve thin-wall molding down to 1.2 mm.

Q12: Is ULTEM AUT200 available in custom colors?
A: Yes. ULTEM AUT200 is transparent and all colors are customizable via SABIC’s ColorXpress service.

Q13: Is ULTEM AUT200 PFAS-free?
A: Yes. ULTEM AUT200 has no PFAS intentionally added during manufacturing.

Q14: Is there a sustainable/bio-based version of ULTEM AUT200?
A: Yes. ISCC+ certified renewable bio-based solutions are available for this grade via differentiated color nomenclature.

Q15: What is the heat deflection temperature of ULTEM AUT200?
A: Heat deflection temperature is 197-199°C at 1.82 MPa (ASTM) and 180°C at 1.80 MPa (ISO).

Q16: What is the recommended drying condition for ULTEM AUT200?
A: Dry at 150°C for 4-6 hours.

Q17: What is the lead time for orders?
A: Regular orders ship within 7-10 working days after payment confirmation. Large-volume or urgent orders can be negotiated separately.

CTA (Call to Action)

Ready to order ULTEM AUT200?

To get a precise quotation and professional technical support, please share:

• Required quantity (kg)

• Destination port or delivery address

• Target application (automotive lighting, reflectors, bezels, etc.)

• Processing method (injection molding)

• Color requirement (transparent or custom color via ColorXpress)

• Bio-based preference (standard or ISCC+ certified renewable grade)

• Document requirement (TDS, SDS, UL, COA, etc.)

Sample Policy:

• Samples are for laboratory validation tests only, not for production use.

• Buyer bears international sample-shipping freight.

• If bulk-product performance deviates from sample reference, SABIC official TDS serves as the authoritative benchmark.

Take action now:

• 📧 Email Us – ruiqingchem@gmail.com

• 📝 Send Inquiry – Use our quick inquiry form

• 💬 Live Chat – Click the bottom-right chat widget to speak directly with our team

After-Sales Support

Disclaimer

DISCLAIMER: All technical data is referenced from original SABIC typical values for ULTEM AUT200. Our company acts as authorized distributor/trader rather than original manufacturer. Final performance depends on processing conditions, mold design, and part geometry. Buyers shall independently validate product suitability for individual applications. Our firm bears no liability for product failure caused by improper processing or improper usage. Always reference the latest SABIC official TDS of ULTEM AUT200 as the definitive specification.