描述
ULTEM Resin 1010E is a sustainable, high-flow, unreinforced amorphous polyetherimide (PEI) engineering thermoplastic manufactured by SABIC. As an authorized distributor and trader, we supply genuine SABIC materials with full traceability. For more product options and company information, please visit our website at https://szrqchem.com/.
ULTEM 1010E is a general purpose, unreinforced grade designed with improved flow and internal mold release for easier processing. Key attributes include:
-
High Heat Resistance – Glass transition temperature (Tg) of 217°C; RTI (Relative Thermal Index) up to 180°C; heat deflection temperature of 201°C at 1.8 MPa
-
Inherent Flame Retardancy – UL94 V-0 (0.75mm) and 5VA (3.0mm) ratings without additives; oxygen index of 47%
-
High Strength & Modulus – High strength and stiffness maintained up to 200°C
-
Excellent Dimensional Stability – One of the most dimensionally stable thermoplastics
-
Broad Chemical Resistance – Resists automotive fluids, aircraft fluids, alcohols, acids, and weak aqueous solutions
-
Low Smoke & Toxicity – Meets aerospace FAR 25.853 compliance
-
RoHS Compliant & Halogen Free – Natural, uncolored material is halogen free per IEC 61249-2-21, IPC 4101E, and JEDEC JS709B
-
ISCC+ Certified Bio-Based Solutions – Renewable bio-based options available
Key Features of ULTEM 1010E
-
Sustainable Grade – ISCC+ certified renewable bio-based solutions available; mass balance approach replaces 25.5 kg of fossil feedstock with bio-based materials per 100 kg of ULTEM resin
-
Improved Flow & Internal Mold Release – Enhanced flow characteristics and internal mold release for easier processing and better mold filling
-
Amorphous Structure – Transparent amber appearance with excellent optical clarity; also available in custom transparent and opaque colors
-
High Heat Resistance – Glass transition temperature of 217°C; RTI up to 180°C
-
Inherent Flame Retardancy – UL94 V-0 (0.75mm) and 5VA (3.0mm) ratings; oxygen index of 47%
-
High Mechanical Strength – Strength and stiffness maintained up to 200°C; comparable to filled thermoplastics
-
Excellent Dimensional Stability – One of the most stable thermoplastics with wide temperature range predictability
-
Good Chemical Resistance – Excellent resistance to automotive fluids, aircraft fluids, alcohols, acids, and weak aqueous solutions
-
Outstanding Electrical Properties – Low dielectric constant and high insulation properties
-
Low Smoke & Low Toxicity – Meets aerospace FAR 25.853; combustion products are no more toxic than wood
-
Radiation Resistance – Supports steam, EtO, and gamma ray sterilization
-
Versatile Processing – Suitable for injection molding, extrusion, blow molding, compression molding, and additive manufacturing
Typical Applications for ULTEM 1010E
| Industry | Typical Applications |
|---|---|
| Aerospace | Aircraft interior components, panels, trim, sensor housings – FAR 25.853 compliant |
| Electrical & Electronics | 5G high-frequency connectors, base station filters, ECU housings, transformer bobbins, IC sockets |
| Medical Devices | Sterilizable surgical instruments, sterilization containers, endoscope components – supports steam/EtO/gamma sterilization |
| Automotive | New energy battery insulation parts, sensor brackets, lamp reflectors – heat and creep resistant, weight reduction |
| Semiconductor | High-temperature wafer carriers, sockets, and fluid handling components |
| Consumer Goods | Eyewear, sports/leisure, speaker/earphone components, personal accessories |
| Industrial / Photovoltaic | Precision gears, pump/valve components, PV junction boxes – chemical and outdoor aging resistance |
| Additive Manufacturing | 3D printing filaments for high-performance parts |
Typical Properties
| Property | ULTEM 1010E | Unit | Test Method |
|---|---|---|---|
| Density / Specific Gravity | 1.27 | g/cm³ | ASTM D792 |
| Glass Transition Temperature (Tg) | 217 | °C | |
| RTI (Elec/Imp/Str) | 170-180 | °C | UL 746 |
| Heat Deflection Temp. (1.8MPa) | 201 | °C | ASTM D648 |
| Tensile Strength | ~110 | MPa | ASTM D638 |
| Flexural Modulus | ~3,500 | MPa | ASTM D790 |
| Elongation at Break | ~60 | % | ASTM D638 |
| Izod Impact (Notched, 3.2mm) | ~53 | J/m | ASTM D256 |
| Rockwell Hardness | M106 | – | ASTM D785 |
| Water Absorption (24 hrs) | 0.25 | % | ASTM D570 |
| Mold Shrinkage (Flow) | 0.50-0.70 | % | SABIC Method |
| Volume Resistivity | 1×10¹⁷ | Ω·cm | ASTM D257 |
| Dielectric Strength | 33 | kV/mm | ASTM D149 |
| Limiting Oxygen Index (LOI) | 47 | % | ASTM D2863 |
| UL 94 Flammability | V-0 (0.75mm), 5VA (3.0mm) | – | UL 94 |
Important Notes on Typical Data:
-
Values listed are typical and sourced from SABIC official data sheets. They do not constitute binding product specification.
-
Batch-to-batch deviations may exist. For critical applications, validate performance with batch-specific COA certificate.
-
Final performance depends on processing conditions, mold design, and part geometry.
-
SABIC official TDS shall serve as definitive technical reference. Request the latest official TDS from our sales team.
Processing Guidelines
| Parameter | Recommended Conditions |
|---|---|
| Drying | 150°C for 4-6 hours (recommended moisture content <0.02%) |
| Rear Temperature | 330-400°C |
| Middle Temperature | 340-400°C |
| Front Temperature | 345-400°C |
| Nozzle Temperature | 345-400°C |
| Mold Temperature | 135-165°C |
| Processing (Melt) Temperature | 350-400°C |
| Back Pressure | 0.3-0.7 MPa |
| Screw Speed | 40-70 rpm |
Critical Processing Warnings:
-
Drying: ULTEM 1010E is hygroscopic and must be dried to <0.02% moisture before processing. Dry at 150°C for 4-6 hours.
-
Melt Temperature: Recommended melt temperature range is 350-400°C. Avoid excessive residence times to prevent thermal degradation.
-
Mold Temperature: Higher mold temperatures (135-165°C) improve flow and reduce residual stress.
-
Gate Design: Use large gates and runners to minimize flow resistance and reduce molded-in stress.
-
Regrind: Regrind can be used up to 20-25% with virgin material, provided it is clean and properly dried.
-
Internal Mold Release: 1010E contains internal mold release agents for improved demolding.
Related Products
-
Explore Engineering Plastics – Browse all engineering plastic materials
-
About Our Company – Learn more about our supply capabilities and quality assurance
Technical Documents
| Document Type | Description & Source |
|---|---|
| SABIC Official TDS | Complete physical, thermal, and mechanical properties of ULTEM 1010E |
| SABIC Official SDS | GHS-compliant chemical safety documentation |
| UL Yellow Card | UL certification E121562 |
| FDA Compliance Declaration | FDA food contact compliance |
| COA (Certificate of Analysis) | Batch-specific quality certification |
| ISCC+ Certification | Bio-based renewable certification |
| Processing Guide | Detailed processing guidelines for ULTEM resins |
Request any document above by:
-
Email:
ruiqingchem@gmail.com -
Online form: Our contact page
We reply within one working business day. Please clearly state product (ULTEM 1010E) and document type you require.
FAQ
Q1: What is ULTEM 1010E and what is it used for?
A: ULTEM 1010E is a sustainable, high-flow, unreinforced polyetherimide (PEI) resin manufactured by SABIC. It combines high heat resistance (Tg 217°C), inherent flame retardancy (UL94 V-0), high strength, excellent dimensional stability, improved flow, and internal mold release. It is widely used in aerospace, 5G/electrical components, medical devices, automotive, and semiconductor applications.
Q2: What is the difference between ULTEM 1010 and 1010E?
A: ULTEM 1010E is the sustainable grade version with ISCC+ certified renewable bio-based options. It also features internal mold release for improved demolding.
Q3: What is the glass transition temperature of ULTEM 1010E?
A: The glass transition temperature (Tg) is 217°C.
Q4: What is the density of ULTEM 1010E?
A: The density is 1.27 g/cm³.
Q5: Is ULTEM 1010E flame retardant?
A: Yes. ULTEM 1010E is inherently flame retardant with UL94 V-0 (0.75mm) and 5VA (3.0mm) ratings.
Q6: What processing methods can be used for ULTEM 1010E?
A: ULTEM 1010E can be processed by injection molding, extrusion, blow molding, compression molding, and additive manufacturing.
Q7: Is ULTEM 1010E halogen free?
A: Yes. The natural, uncolored material is halogen free per IEC 61249-2-21, IPC 4101E, and JEDEC JS709B.
Q8: What does the “E” suffix in 1010E stand for?
A: The “E” suffix indicates enhanced flow and internal mold release characteristics, and in many cases also denotes a sustainable / bio-based grade.
Q9: What is the lead time for orders?
A: Regular orders ship within 7-10 working days after payment confirmation. Large-volume or urgent orders can be negotiated separately.
CTA (Call to Action)
Ready to order ULTEM 1010E?
To get a precise quotation and professional technical support, please share:
-
Required quantity (kg)
-
Destination port or delivery address
-
Target application (aerospace, 5G/electrical, medical, automotive, etc.)
-
Processing method (injection molding, extrusion, additive manufacturing, etc.)
-
Color requirement (natural amber or custom color)
-
Bio-based preference (standard or ISCC+ certified renewable grade)
-
Document requirement (TDS, SDS, UL, FDA compliance, COA, etc.)
Sample Policy:
-
Samples are for laboratory validation tests only, not for production use.
-
Buyer bears international sample-shipping freight.
-
If bulk-product performance deviates from sample reference, SABIC official TDS serves as the authoritative benchmark.
Take action now:
-
📧 Email Us –
ruiqingchem@gmail.com -
📝 Send Inquiry – Use our quick inquiry form
-
💬 Live Chat – Click the bottom-right chat widget to speak directly with our team
After-Sales Support
| Service | Details |
|---|---|
| Quality Inspection Period | All quality-related claims must be submitted within 7 working-days after delivery, supported by test data and photographic evidence. |
| Return / Exchange Policy | Confirmed product defects caused by our side trigger replacement or refund. Terms and conditions apply. |
| Logistics Damage | Report shipping damage directly to carrier immediately upon goods receipt. We assist with claim-document preparation. |
| Technical Support | Remote technical guidance available. On-site troubleshooting can be arranged upon special request. |
| Export Documentation | We supply commercial invoice, packing list, bill of lading, COA, and additional compliance certificates (e.g., FDA, UL, RoHS, ISCC+) on request. |
Disclaimer
DISCLAIMER: All technical data is referenced from original SABIC typical values for ULTEM 1010E. Our company acts as authorized distributor/trader rather than original manufacturer. Final performance depends on processing conditions, mold design, and part geometry. Buyers shall independently validate product suitability for individual applications. Our firm bears no liability for product failure caused by improper processing or improper usage. Always reference the latest SABIC official TDS of ULTEM 1010E as the definitive specification.
