描述
NORYL V01525 Resin is a 15% milled fiber reinforced blend of polyphenylene ether (PPE) and high impact polystyrene (HIPS), manufactured by SABIC. This injection moldable grade was specifically designed for applications requiring very good dimensional stability, low warpage, and thin-wall flame retardance.
This material contains non-brominated, non-chlorinated flame retardant and carries a UL94 flame rating of V-0 at 1.5mm for thin-wall parts. NORYL V01525 is targeted for electrical insulator components, appliance internal components, and electrical enclosures and housings requiring thin-wall FR and good dimensional stability. Physical property data is determined using test methods established by ASTM International and ISO, the globally recognized standards organizations.
For more NORYL grades and technical information, please visit our PPO/PPE product page.
Key Features of NORYL V01525 Resin
-
15% Milled Fiber Reinforced – Provides enhanced stiffness, strength, and dimensional stability while maintaining low warpage
-
Halogen-Free Flame Retardant – Non-brominated, non-chlorinated flame retardant system
-
UL94 V-0 Rated – V-0 at 1.5mm thickness for thin-wall parts
-
Low Warpage – Minimizes deformation during processing and use
-
Good Dimensional Stability – Precise part geometry with excellent dimensional control
-
High Stiffness/Strength – Flexural modulus of 3,000–3,200 MPa
-
Creep Resistant – Maintains dimensional integrity under sustained load
-
Hydrolytic Stability – Resists degradation in wet environments
-
Thin-Wall FR Capability – UL94 V-0 at 1.5mm for thin-wall parts
-
Good Electrical Properties – Volume resistivity of 1×10¹⁵ Ω·cm
-
Low Specific Gravity – Density of 1.13–1.25 g/cm³
-
No PFAS Intentionally Added – Compliant with environmental regulations
-
Injection Moldable – Suitable for standard injection molding processes
-
RoHS Compliant – Meets global environmental standards
Typical Applications for NORYL V01525 Resin
| Industry | Typical Components & Considerations |
|---|---|
| Electrical & Electronics | Electrical insulator components, enclosures, housings – UL94 V-0, thin-wall FR, dimensional stability |
| Appliances | Appliance internal components – flame retardant, low warpage, good dimensional stability |
| Commercial Appliances | Commercial appliance components – thin-wall FR, high stiffness |
| Industrial | General industrial components requiring thin-wall flame retardance – UL94 V-0, creep resistance |
| Electronic Components | Mobile phones, computers, tablets – low warpage, dimensional stability |
Typical Properties of NORYL V01525 Resin
| Property | Value | Test Method |
|---|---|---|
| Physical | ||
| Specific Gravity | 1.13–1.25 | ASTM D792 / ISO 1183 |
| Mold Shrinkage, Flow (3.2mm) | 0.3 – 0.5% | SABIC Method |
| Melt Flow Rate (300°C/5.0kg) | 24 g/10min | ASTM D1238 |
| Water Absorption (23°C/Saturated) | 0.45% | ISO 62-1 |
| Moisture Absorption (23°C/50% RH) | 0.06% | ISO 62 |
| Mechanical (ASTM) | ||
| Tensile Stress, Yield | 69 MPa | ASTM D638 |
| Tensile Stress, Break | 66 MPa | ASTM D638 |
| Tensile Strain, Yield | 4% | ASTM D638 |
| Tensile Strain, Break | 5% | ASTM D638 |
| Tensile Modulus (5 mm/min) | 3,100 MPa | ASTM D638 |
| Flexural Strength (1.3 mm/min, 50 mm span) | 114–115 MPa | ASTM D790 |
| Flexural Modulus (1.3 mm/min, 50 mm span) | 3,200 MPa | ASTM D790 |
| Ball Indentation Hardness (H358/30) | 140 MPa | ISO 2039-1 |
| Taber Abrasion (CS-17, 1 kg) | 75 mg/1000cy | SABIC Method |
| Mechanical (ISO) | ||
| Tensile Stress, Yield | 58 MPa | ISO 527 |
| Tensile Stress, Break | 55 MPa | ISO 527 |
| Tensile Strain, Yield | 4% | ISO 527 |
| Tensile Strain, Break | 5% | ISO 527 |
| Tensile Modulus (1 mm/min) | 3,100 MPa | ISO 527 |
| Flexural Strength (2 mm/min) | 100 MPa | ISO 178 |
| Flexural Modulus (2 mm/min) | 3,000 MPa | ISO 178 |
| Thermal | ||
| Heat Deflection Temperature | Refer to full TDS | ASTM D648 |
| Vicat Softening Temperature | Refer to full TDS | ASTM D1525 / ISO 306 |
| Electrical | ||
| Volume Resistivity | 1×10¹⁵ Ω·cm | IEC 60093 |
| Surface Resistivity | >1×10¹⁵ Ω | IEC 60093 |
| Dielectric Strength (in oil, 0.8mm) | 33 kV/mm | IEC 60243-1 |
| Dielectric Strength (in oil, 1.6mm) | 26 kV/mm | IEC 60243-1 |
| Dielectric Strength (in oil, 3.2mm) | 16 kV/mm | IEC 60243-1 |
| Relative Permittivity (50/60 Hz) | 3.0 | IEC 60250 |
| Relative Permittivity (1 MHz) | 2.9 | IEC 60250 |
| Dissipation Factor (50/60 Hz) | 0.006 | IEC 60250 |
| Dissipation Factor (1 MHz) | 0.003 | IEC 60250 |
| Comparative Tracking Index (CTI) | 175 V | IEC 60112 |
| CTI (UL) {PLC} | 4 | UL 746A |
| Flammability | ||
| UL94 Flame Rating (1.5mm) | V-0 | UL 94 |
| UL94 Flame Rating (≥3.0mm) | 5VA | UL 94 |
| UL Yellow Card | E45329 | UL |
| Processing | ||
| Processing Method | Injection molding | — |
| Drying Temperature | Refer to full TDS | — |
| Drying Time | Refer to full TDS | — |
| Melt Temperature | Refer to full TDS | — |
| Mold Temperature | Refer to full TDS | — |
| UL Yellow Card Link | View | UL |
Important Notes on Typical Data:
Values listed are typical and sourced from manufacturer data sheets. They do not constitute binding product specification.
Batch-to-batch deviations may exist. For critical applications, validate performance with batch-specific COA certificate.
Final performance depends on processing conditions and part design.
Manufacturer official TDS shall serve as definitive technical reference. Request the latest official TDS from our sales team.
Processing Guidelines for NORYL V01525 Resin
| Step | Process |
|---|---|
| Processing Method | Injection molding |
| Drying Temperature | Refer to full TDS |
| Drying Time | Refer to full TDS |
| Hopper Temperature | Refer to full TDS |
| Rear Temperature | Refer to full TDS |
| Middle Temperature | Refer to full TDS |
| Front Temperature | Refer to full TDS |
| Nozzle Temperature | Refer to full TDS |
| Melt Temperature | Refer to full TDS |
| Mold Temperature | Refer to full TDS |
| Storage | Store in original, sealed packaging in a cool, dry place away from direct sunlight |
Critical Processing Warnings:
Injection Molding: NORYL V01525 is specifically designed for injection molding.
Drying: Proper drying is critical to prevent hydrolysis and achieve optimal mechanical properties. Refer to the full TDS for specific drying conditions.
Milled Fiber Reinforcement: This grade contains 15% milled fiber reinforcement, which provides enhanced dimensional stability and low warpage while maintaining good flow characteristics.
UL Compliance: This grade carries UL94 V-0 (1.5mm) and 5VA (≥3.0mm) ratings. Ensure processing conditions maintain compliance.
Thin-Wall FR Performance: This grade is specifically formulated for thin-wall flame retardant applications. Verify wall thickness requirements for UL94 V-0 compliance.
Storage: Store in original, sealed packaging in a cool, dry place away from direct sunlight.
Related Products for NORYL V01525 Resin
Explore Engineering Plastics – Browse all engineering plastic materials
About Our Company – Learn more about our supply capabilities and quality assurance
Technical Documents for NORYL V01525 Resin
| Document Type | Description & Source |
|---|---|
| Manufacturer Official TDS | Complete physical, thermal, and mechanical properties of NORYL V01525 |
| Manufacturer Official SDS | GHS-compliant safety documentation |
| COA (Certificate of Analysis) | Batch-specific quality certification |
| UL Yellow Card | E45329 – SABIC INNOVATIVE PLASTICS B V |
Request any document above by:
Email: ruiqingchem@gmail.com
Online form: Our contact page
We reply within one working business day. Please clearly state product (NORYL V01525) and document type you require.
FAQ about NORYL V01525 Resin
Q1: What is NORYL V01525?
A: NORYL V01525 is a 15% milled fiber reinforced blend of polyphenylene ether (PPE) and high impact polystyrene (HIPS) from SABIC. It is an injection moldable grade with non-halogenated flame retardancy, UL94 V-0 rating at 1.5mm, low warpage, and good dimensional stability.
Q2: What are the key features of NORYL V01525?
A: 15% milled fiber reinforcement, halogen-free flame retardancy (UL94 V-0 at 1.5mm), low warpage, good dimensional stability, high stiffness (flexural modulus 3,000–3,200 MPa), high strength (tensile yield 69 MPa), creep resistance, hydrolytic stability, thin-wall FR capability, and No PFAS intentionally added.
Q3: What are the typical applications for NORYL V01525?
A: Electrical insulator components, appliance internal components, electrical enclosures and housings requiring thin-wall FR and good dimensional stability, commercial appliances, and general industrial components.
Q4: What is the flame rating of NORYL V01525?
A: UL94 V-0 at 1.5mm thickness and 5VA at ≥3.0mm thickness.
Q5: Is NORYL V01525 halogen-free?
A: Yes, it contains non-brominated, non-chlorinated flame retardant.
Q6: Is NORYL V01525 PFAS-free?
A: Yes, this product does not contain PFAS intentionally added during the manufacturing process.
Q7: What is the recommended processing method for NORYL V01525?
A: Injection molding.
Q8: What is the specific gravity of NORYL V01525?
A: 1.13–1.25.
Q9: What is the flexural modulus of NORYL V01525?
A: Flexural modulus is 3,000–3,200 MPa.
Q10: What is the UL Yellow Card number for NORYL V01525?
A: E45329 – SABIC INNOVATIVE PLASTICS B V.
Q11: What regions is NORYL V01525 available in?
A: Africa & Middle East, Americas, Asia Pacific, Europe, and Latin America.
CTA (Call to Action)
Ready to order NORYL V01525?
To get a precise quotation and professional technical support, please share:
-
Required quantity (kg)
-
Destination port or delivery address
-
Target application (electrical insulator components, appliance internals, enclosures, etc.)
-
Document requirement (TDS, SDS, COA, UL docs, etc.)
Sample Policy:
-
Samples are for laboratory validation tests only, not for production use.
-
Buyer bears international sample-shipping freight.
-
If bulk-product performance deviates from sample reference, manufacturer official TDS serves as the authoritative benchmark.
Take action now:
-
📧 Email Us – ruiqingchem@gmail.com
-
📝 Send Inquiry – Use our quick inquiry form
-
💬 Live Chat – Click the bottom-right chat widget to speak directly with our team
After-Sales Support
| Service | Details |
|---|---|
| Quality Inspection Period | All quality-related claims must be submitted within 7 working days after delivery, supported by test data and photographic evidence. |
| Return / Exchange Policy | Confirmed product defects caused by our side trigger replacement or refund. Terms and conditions apply. |
| Logistics Damage | Report shipping damage directly to carrier immediately upon goods receipt. We assist with claim-document preparation. |
| Technical Support | Remote technical guidance available. On-site troubleshooting can be arranged upon special request. |
| Export Documentation | We supply commercial invoice, packing list, bill of lading, COA, and additional compliance certificates on request. |
Disclaimer
DISCLAIMER: All technical data is referenced from original manufacturer typical values for NORYL V01525. Our company acts as authorized distributor/trader rather than original manufacturer. Final performance depends on processing conditions and part design. Buyers shall independently validate product suitability for individual applications. Our firm bears no liability for product failure caused by improper processing or improper usage. Always reference the latest manufacturer official TDS of NORYL V01525 as the definitive specification.
