描述
NORYL NH4030B Resin is a non-reinforced blend of polyphenylene ether (PPE) and high impact polystyrene (HIPS), manufactured by SABIC. This high flow, injection moldable and extrusion grade contains non-brominated, non-chlorinated flame retardant and carries a UL94 flame rating of V-0 at 1.5mm, along with lower smoke production upon burning and low specific gravity for light-weight parts.
NORYL NH4030B Resin offers good impact strength, good surface appearance, excellent processability, low warpage, and dimensional stability. The material is heat stabilized and impact modified. It exhibits hydrolytic stability, low creep sensitivity, and good chemical resistance to many cleaning agents and acids. This material is an excellent candidate for rail interior, electrical conduit, cable management, and ceiling-mounted electrical applications. This product does not contain PFAS intentionally added during the manufacturing process.
For more NORYL grades and technical information, please visit our PPO/PPE product page.
Key Features of NORYL NH4030B Resin
-
Halogen-Free Flame Retardant – Non-brominated, non-chlorinated flame retardant system
-
UL94 V-0 Rated – V-0 at 1.5mm thickness
-
Low Smoke Production – Reduced smoke emission upon burning, critical for transportation and enclosed spaces
-
High Flow – Excellent moldability for injection molding and extrusion
-
Non-Reinforced – Unfilled PPE/HIPS blend for balanced performance
-
Low Specific Gravity – Lightweight for mass transportation applications
-
Good Impact Strength – Excellent balance of impact resistance and surface appearance
-
Good Dimensional Stability – Low warpage and low shrinkage (0.5–0.8% flow, 3.2mm)
-
Good Surface Appearance – Aesthetically pleasing finished parts
-
Excellent Processability – Suitable for injection molding, profile extrusion, and sheet extrusion
-
Hydrolytic Stability – Resists degradation in wet environments
-
Low Creep Sensitivity – Maintains dimensional integrity under sustained load
-
Good Chemical Resistance – Resists many cleaning agents and acids
-
Heat Stabilized – Maintains properties under thermal exposure
-
Impact Modified – Enhanced impact resistance
-
RoHS Compliant – Meets global environmental standards
-
No PFAS Intentionally Added – Compliant with environmental regulations
Typical Applications for NORYL NH4030B Resin
| Industry | Typical Components & Considerations |
|---|---|
| Mass Transportation | Rail interior components – UL94 V-0, low smoke, halogen-free flame retardant |
| Electrical & Electronics | Electrical conduit, cable management – halogen-free flame retardant, high flow, dimensional stability |
| Electrical & Electronics | Ceiling-mounted electrical applications – UL94 V-0, low smoke, low specific gravity |
| Building & Construction | Building components – flame retardant, low smoke, dimensional stability |
| Consumer Electronics | Mobile phones, computers, tablets – low warpage, dimensional stability |
Typical Properties of NORYL NH4030B Resin
| Property | Value | Test Method |
|---|---|---|
| Physical | ||
| Specific Gravity | 1.11 g/cm³ | ASTM D792 |
| Density | 1110 kg/m³ | ASTM D792 |
| Linear Mold Shrinkage, Flow (3.2mm) | 0.5 – 0.8% | SABIC Method |
| Melt Flow Rate (MFR) (300°C/5.0kg) | 42.7 g/10min | ASTM D1238 |
| Melt Volume Rate (MVR) (300°C/5.0kg) | 41 cm³/10min | ISO 1133 |
| Mechanical (ASTM) | ||
| Tensile Modulus | 2450 MPa | ASTM D638 |
| Tensile Stress, Yield | 56 MPa | ASTM D638 |
| Tensile Stress, Break | 46 MPa | ASTM D638 |
| Tensile Strain, Yield | 4.2% | ASTM D638 |
| Tensile Strain, Break | 27.5% | ASTM D638 |
| Flexural Modulus | 2400 MPa | ASTM D790 |
| Flexural Strength, Yield | 90 MPa | ASTM D790 |
| Notched Izod Impact (23°C, 1/8 in) | 200 J/m | ASTM D256 |
| Notched Izod Impact (-30°C, 1/8 in) | 117 J/m | ASTM D256 |
| Mechanical (ISO) | ||
| Tensile Modulus | 2430 MPa | ISO 527 |
| Tensile Stress, Yield | 54 MPa | ISO 527 |
| Tensile Stress, Break | 47 MPa | ISO 527 |
| Tensile Strain, Yield | 4% | ISO 527 |
| Tensile Strain, Break | 27.8% | ISO 527 |
| Flexural Modulus | 2380 MPa | ISO 178 |
| Flexural Strength, Yield | 90 MPa | ISO 178 |
| Charpy Notched Impact (23°C) | 19 kJ/m² | ISO 179/1eA |
| Notched Izod Impact (23°C, 4mm) | 15 kJ/m² | ISO 180/1A |
| Notched Izod Impact (-30°C, 4mm) | 11 kJ/m² | ISO 180/1A |
| Instrumented Dart Impact (23°C) | 46 J | ASTM D3763 |
| Thermal | ||
| HDT @ 1.82 MPa (264 psi, 3.2mm) | 106°C | ASTM D648 |
| HDT @ 1.80 MPa | 107°C | ISO 75-1/-2 |
| Vicat Softening Temperature (Rate B/50) | 127°C | ASTM D1525 |
| Vicat Softening Temperature (120°C/h 50N) | 128°C | ISO 306 |
| Flammability | ||
| Flame Rating (1.5mm) | V-0 | UL 94 |
| Flame Rating (1.5 – 3.0 mm) | V-0 | UL 94 |
| UL Yellow Card | E121562 | UL |
Important Notes on Typical Data:
Values listed are typical and sourced from manufacturer data sheets. They do not constitute binding product specification.
Batch-to-batch deviations may exist. For critical applications, validate performance with batch-specific COA certificate.
Final performance depends on processing conditions and part design.
Manufacturer official TDS shall serve as definitive technical reference. Request the latest official TDS from our sales team.
Processing Guidelines for NORYL NH4030B Resin
| Step | Process |
|---|---|
| Processing Methods | Injection molding, profile extrusion, sheet extrusion |
| Drying | Refer to full TDS for specific drying conditions |
| Melt Temperature | Refer to full TDS |
| Mold Temperature | Refer to full TDS |
| Storage | Store in original, sealed packaging in a cool, dry place away from direct sunlight |
Critical Processing Warnings:
Injection Molding & Extrusion: NORYL NH4030B is suitable for injection molding, profile extrusion, and sheet extrusion.
Drying: Proper drying is critical to prevent hydrolysis and achieve optimal mechanical properties.
UL Compliance: This grade carries a UL94 V-0 rating at 1.5mm thickness. Ensure processing conditions maintain compliance.
Low Smoke: This grade features lower smoke production upon burning. Ensure processing conditions maintain this property.
Storage: Store in original, sealed packaging in a cool, dry place away from direct sunlight.
Related Products
Explore Engineering Plastics – Browse all engineering plastic materials
About Our Company – Learn more about our supply capabilities and quality assurance
Technical Documents for NORYL NH4030B Resin
| Document Type | Description & Source |
|---|---|
| Manufacturer Official TDS | Complete physical, thermal, and mechanical properties of NORYL NH4030B |
| Manufacturer Official SDS | GHS-compliant safety documentation |
| COA (Certificate of Analysis) | Batch-specific quality certification |
| UL Yellow Card | E121562 – UL safety certification |
Request any document above by:
Email: ruiqingchem@gmail.com
Online form: Our contact page
We reply within one working business day. Please clearly state product (NORYL NH4030B) and document type you require.
FAQ about NORYL NH4030B Resin
Q1: What is NORYL NH4030B?
A: NORYL NH4030B is a non-reinforced blend of polyphenylene ether (PPE) and high impact polystyrene (HIPS) from SABIC. It is a high flow, injection moldable and extrusion grade with non-halogenated flame retardancy, UL94 V-0 rating at 1.5mm, low smoke production, and low specific gravity.
Q2: What are the key features of NORYL NH4030B?
A: It offers halogen-free flame retardancy (UL94 V-0 at 1.5mm), low smoke production, high flow, low specific gravity, good impact strength, good surface appearance, excellent processability, low warpage, dimensional stability, hydrolytic stability, low creep sensitivity, and good chemical resistance.
Q3: What are the typical applications for NORYL NH4030B?
A: Typical applications include rail interior components, electrical conduit, cable management, ceiling-mounted electrical applications, building components, and consumer electronics.
Q4: What is the flame rating of NORYL NH4030B?
A: UL94 V-0 at 1.5mm thickness.
Q5: Is NORYL NH4030B halogen-free?
A: Yes, it contains non-brominated, non-chlorinated flame retardant.
Q6: What is the recommended processing method for NORYL NH4030B?
A: NORYL NH4030B is suitable for injection molding, profile extrusion, and sheet extrusion.
Q7: What is the melt flow rate of NORYL NH4030B?
A: The melt flow rate (MFR) is 42.7 g/10min at 300°C/5.0kg.
Q8: What is the UL Yellow Card number for NORYL NH4030B?
A: E121562.
Q9: What regions is NORYL NH4030B available in?
A: It is available in the Americas, Asia, and Europe.
Q10: What is the lead time for orders?
A: Regular orders ship within 7-10 working days after payment confirmation. Large-volume orders can be negotiated separately.
CTA (Call to Action)
Ready to order NORYL NH4030B?
To get a precise quotation and professional technical support, please share:
-
Required quantity (kg)
-
Destination port or delivery address
-
Target application (rail interior, electrical conduit, cable management, etc.)
-
Document requirement (TDS, SDS, COA, UL docs, etc.)
Sample Policy:
-
Samples are for laboratory validation tests only, not for production use.
-
Buyer bears international sample-shipping freight.
-
If bulk-product performance deviates from sample reference, manufacturer official TDS serves as the authoritative benchmark.
Take action now:
-
📧 Email Us – ruiqingchem@gmail.com
-
📝 Send Inquiry – Use our quick inquiry form
-
💬 Live Chat – Click the bottom-right chat widget to speak directly with our team
After-Sales Support
| Service | Details |
|---|---|
| Quality Inspection Period | All quality-related claims must be submitted within 7 working days after delivery, supported by test data and photographic evidence. |
| Return / Exchange Policy | Confirmed product defects caused by our side trigger replacement or refund. Terms and conditions apply. |
| Logistics Damage | Report shipping damage directly to carrier immediately upon goods receipt. We assist with claim-document preparation. |
| Technical Support | Remote technical guidance available. On-site troubleshooting can be arranged upon special request. |
| Export Documentation | We supply commercial invoice, packing list, bill of lading, COA, and additional compliance certificates on request. |
Disclaimer
DISCLAIMER: All technical data is referenced from original manufacturer typical values for NORYL NH4030B. Our company acts as authorized distributor/trader rather than original manufacturer. Final performance depends on processing conditions and part design. Buyers shall independently validate product suitability for individual applications. Our firm bears no liability for product failure caused by improper processing or improper usage. Always reference the latest manufacturer official TDS of NORYL NH4030B as the definitive specification.
