描述
MacDermid Alpha Micromax 0F20E Lead Free Paste, ESD Stable
Type: Lead Free Thick Film Resistor Paste
Pack: 100G / 1000G
Film Thickness: 11-13 μm
Firing: 850°C / 30 min
ESD: Excellent
Shelf Life: 6 months
MacDermid Alpha Micromax 0F20E delivers lead free composition with excellent ESD stability and high speed laser trimmability — engineered for chip resistor applications with thick film performance and 850°C fast firing.
MacDermid Alpha Micromax 0F20E is a lead free thick film resistor paste specifically developed for chip resistor applications requiring environmentally friendly materials and consistent electrical performance. This grade delivers excellent ESD stability for sensitive circuit designs, good power handling stability for reliable operation, and high speed laser trimmability for precise resistance adjustment. The material features narrow TCR gap for stable resistance across temperature variations and excellent performance with thinner printed thickness for smaller chip sizes. The formulation is lead free, cadmium free, nickel free, and phthalate free.
This lead free thick film resistor paste is optimized for 11-13 μm dried film thickness using 200-325 mesh screens with 5-25 μm emulsion. It offers cross-blendability with Micromax OFXXA series and is also blendable with 00LXX series for flexible resistance tuning. It supports co-firing with high silver terminations at 850°C peak temperature with a 30-minute total firing cycle. The lead free, cadmium free, nickel free and phthalate free formulation meets international environmental standards including RoHS and REACH. Standard packaging options are 100G and 1000G.
Genuine MacDermid Alpha Micromax Imported Stock and Technical Support
We maintain stable inventory of authentic MacDermid Alpha Micromax 0F20E lead free thick film resistor paste. Factory-original TDS and batch-specific COA can be provided upon request for electronic component manufacturing projects.
Request Sample, TDS & Quotation
Complete TDS, COA, and regulatory documentation available
Core Advantages of MacDermid Alpha Micromax 0F20E
- Lead, Cadmium, Nickel and Phthalate free — environmentally friendly composition meeting RoHS and REACH standards
- Excellent ESD stability — robust electrostatic protection for sensitive circuit designs
- High speed laser trimmable — precise resistance adjustment for tight tolerance thick film manufacturing
- Narrow TCR gap — consistent resistance across temperature variations
- Thick film performance — excellent results with 11-13 μm dried thickness for smaller chip sizes
- Good power handling stability — reliable operation under varying power conditions
- Cross-blendability — blendable with OFXXA series and 00LXX series
- High silver termination compatible — validated for 5421E Ag/Pd termination systems
Main Applications
- Chip Resistors — lead free chip resistor manufacturing for green electronics
- Hybrid Circuits — resistor networks requiring lead free composition
- Surface Mount Devices — SMD resistor components for consumer and industrial electronics
- Automotive Electronics — resistor components requiring ESD stability and narrow TCR
Full Technical Parameters
| Property | Typical Value | Test / Reference |
| Product Type | Lead free thick film resistor paste | — |
| Application | Chip resistor manufacturing | — |
| Packaging Specification | 100G, 1000G | Standard packing |
| Recommended Film Thickness | 11-13 μm | Dried thickness |
| Recommended Mesh | 200-325 mesh | 5-25 μm emulsion |
| Leveling Time | 5-10 min | Room temperature |
| Drying Temperature | 150°C | 10-15 minutes |
| Firing Peak Temperature | 850°C | 10 min at peak, 30 min total |
| ESD Stability | Excellent | — |
| Power Handling Stability | Good | — |
| Laser Trimmability | High speed laser trimmable | — |
| TCR Gap | Narrow | — |
| Blendability | Cross-blendable with OFXXA, blendable with 00LXX | — |
| Termination Compatibility | High silver terminations (Micromax 5421E Ag/Pd) | — |
| Substrate Compatibility | 96% alumina | — |
| Environmental Compliance | RoHS, REACH, Lead free, Cadmium free, Nickel free, Phthalate free | — |
| Shelf Life | 6 months in unopened containers | — |
| Storage Temperature | 5-30°C | — |
Note: All listed values are typical and may vary by batch. Independent qualification testing is required prior to production use.
Recommended Processing Conditions
| Parameter | Recommended Value |
| Mixing Prior to Use | Slow gentle hand-stirring, 1-2 minutes |
| Optimal Printing Temperature | 20-23°C |
| Screen Mesh | 200-325 mesh |
| Emulsion Thickness | 5-25 μm |
| Leveling Time | 5-10 minutes |
| Drying Temperature | 150°C |
| Drying Time | 10-15 minutes |
| Dried Film Thickness | 11-13 μm |
| Firing Peak Temperature | 850°C |
| Total Firing Cycle | 30 minutes (10 min at peak) |
| Substrate | 96% alumina |
Handling and Storage Recommendations
| Storage Rules | Store in tightly sealed containers in clean, stable environment at 5-30°C. |
| Shelf Life | 6 months in unopened containers from date of shipment. |
| Pre-use Preparation | Thoroughly mix prior to use. Some settling may occur. |
| Thinning | Not normally required; use Micromax 8250(T) thinner sparingly for evaporative losses. |
Official Technical Documentation
| Document Type | Document Introduction | Document Request |
| TDS | MacDermid Alpha Micromax 0F20E original factory technical data sheet | Request TDS |
| COA | Batch-specific certificate of analysis | Request COA |
| SDS | Safety Data Sheet for handling and storage | Request SDS |
Frequently Asked Questions
What is MacDermid Alpha Micromax 0F20E?
MacDermid Alpha Micromax 0F20E is a lead free thick film resistor paste designed for chip resistor applications. It offers excellent ESD stability, good power handling stability, high speed laser trimmability, and narrow TCR gap for precision thick film resistor manufacturing.
What is the recommended film thickness for Micromax 0F20E?
Micromax 0F20E is optimized for 11-13 μm dried film thickness, enabling excellent performance for smaller chip sizes with thinner printed thickness.
What is the recommended screen mesh for Micromax 0F20E?
Micromax 0F20E is optimized for 200-325 mesh screens with 5-25 μm emulsion.
What is the recommended drying and firing profile for Micromax 0F20E?
Micromax 0F20E should be leveled for 5-10 minutes, dried at 150°C for 10-15 minutes, then fired at 850°C peak temperature held for 10 minutes on a 30-minute total firing cycle.
What is the ESD performance of Micromax 0F20E?
Micromax 0F20E delivers excellent ESD stability, making it suitable for sensitive electronic applications requiring electrostatic protection.
Can Micromax 0F20E be laser trimmed?
Yes. Micromax 0F20E supports high speed laser trimming for precise resistance adjustment, enabling tight tolerance thick film chip resistor manufacturing.
Is Micromax 0F20E environmentally compliant?
Yes. Micromax 0F20E is lead free, cadmium free, nickel free, and phthalate free, meeting global environmental compliance standards including RoHS and REACH.
What terminations are compatible with Micromax 0F20E?
Micromax 0F20E is designed for high silver-containing terminations like Micromax 5421E Ag/Pd conductor. Use of different terminations may cause a shift of resistance and TCR values.
What packaging sizes are available for Micromax 0F20E?
Micromax 0F20E is available in 100G and 1000G standard packaging. Contact our sales team for bulk supply options.
Get MacDermid Alpha Micromax 0F20E Bulk Pricing and Technical Support
We supply genuine MacDermid Alpha Micromax 0F20E lead free thick film resistor paste for electronic component manufacturing. Contact us for bulk pricing, sample availability, technical documents, and application support.
Inquire Bulk Price & Technical Support
Disclaimer: All technical data on this page are for general guidance only and are not product specifications. Buyers must carry out independent trials and verify suitability before bulk ordering. Actual values may vary between production lots.
