描述
Micromax 0004A ESD Stable Chip Resistor Paste
Type: Chip Resistor Paste
Pack: 100G / 1000G
Viscosity: 100-150 Pa.s
ESD: Exceptional
Firing: 850°C / 30 min
Shelf Life: 6 months
Micromax 0004A delivers exceptional ESD stability with excellent power handling stability and well controlled TCRs — engineered for reliable chip resistor production with low Quan-Tech noise and 850°C fast firing.
Micromax 0004A is an ESD stable thick film paste specifically developed for chip resistor applications requiring superior electrical protection and consistent performance. This grade delivers exceptional ESD stability through a 100pF/1500Ω network, along with excellent power handling stability to withstand demanding operating conditions. The material features low Quan-Tech noise for signal integrity and well controlled TCRs with minimal length and thickness effects.
This resistor paste offers linear blend behavior between adjacent members, enabling broad resistance coverage without sacrificing electrical properties. It is optimized for high-resolution screen printing at speeds up to 30 cm/sec and supports co-firing with high silver terminations at 850°C peak temperature. The cadmium-free, nickel-free and phthalate-free formulation meets international environmental standards. Standard packaging options are 100G and 1000G.
Genuine Micromax Imported Stock and Technical Support
We maintain stable inventory of authentic Micromax 0004A ESD stable chip resistor paste. Factory-original TDS and batch-specific COA can be provided upon request for electronic component manufacturing projects.
Request Sample, TDS & Quotation
Complete TDS, COA, and regulatory documentation available
Core Advantages of Micromax 0004A
- Exceptional ESD stability — robust electrostatic discharge protection for sensitive chip resistor applications
- Excellent power handling stability — reliable performance under varying power loads
- Low Quan-Tech noise — signal integrity for precision measurement circuits
- Well controlled TCRs — consistent resistance across temperature variations
- Linear blend behavior — broad resistance range without sacrificing electrical properties
- Excellent thermal cycle stability — reliable operation under repeated temperature cycling
- Fast firing profile — 850°C peak with 30-minute total cycle for high throughput
- RoHS, REACH compliant; Cadmium/Nickel/Phthalate free — satisfies global environmental regulations
Main Applications
- Chip Resistors — ESD sensitive chip resistor applications
- Hybrid Circuits — resistor networks requiring ESD protection
- Surface Mount Devices — SMD resistor components for consumer electronics
- Automotive Electronics — resistor components requiring thermal cycle and ESD stability
- Precision Measurement Equipment — low noise resistor applications
Full Technical Parameters
| Property | Typical Value | Test / Reference |
| Product Type | Thick film chip resistor paste | — |
| Application | Chip resistor manufacturing | — |
| Packaging Specification | 100G, 1000G | Standard packing |
| Viscosity (Brookfield HAT 10 rpm) | 100-150 Pa.s | SC4-14/6R, 25°C |
| Leveling Time | 5-10 min | Room temperature |
| Recommended Mesh | 250-325 mesh | — |
| Emulsion Thickness | 10-15 μm | — |
| Dried Film Thickness | 18-22 μm | Avoid >22 μm for laser trimmability |
| Drying Time | 10-15 min | — |
| Firing Peak Temperature | 850°C | 10 min at peak, 30 min total |
| ESD Stability | Exceptional | 100pF / 1500Ω network |
| Power Handling Stability | Excellent | — |
| Quan-Tech Noise | Low | Quan-Tech Model 315C |
| Hot TCR (25-125°C) | Well controlled | — |
| Cold TCR (-55-25°C) | Well controlled | — |
| Thermal Cycle Stability | Excellent | — |
| Termination Compatibility | High silver terminations (Micromax 5426 Ag/Pd) | — |
| Substrate Compatibility | 96% alumina, Micromax QM44 dielectric | — |
| Blendability | Linear blend behavior between adjacent members | — |
| Environmental Compliance | RoHS, REACH, Cadmium free, Nickel free, Phthalate free | — |
| Shelf Life | 6 months in unopened containers | — |
| Storage Temperature | 5-30°C | — |
Note: All listed values are typical and may vary by batch. Independent qualification testing is required prior to production use.
Recommended Processing Conditions
| Parameter | Recommended Value |
| Screen Mesh | 250-325 mesh |
| Emulsion Thickness | 10-15 μm |
| Leveling Time | 5-10 minutes |
| Dried Film Thickness | 18-22 μm |
| Drying Time | 10-15 minutes |
| Firing Peak Temperature | 850°C |
| Total Firing Cycle | 30 minutes (10 min at peak) |
| Substrate | 96% alumina or Micromax QM44 dielectric |
Handling and Storage Recommendations
| Storage Rules | Store in tightly sealed containers in clean, stable environment at 5-30°C. |
| Shelf Life | 6 months in unopened containers from date of shipment. |
| Pre-use Preparation | Thoroughly mix prior to use. Some settling may occur. |
| Thinning | Not normally required; use Micromax 8250(T) thinner sparingly for evaporative losses. |
Official Technical Documentation
| Document Type | Document Introduction | Document Request |
| TDS | Micromax 0004A original factory technical data sheet | Request TDS |
| COA | Batch-specific certificate of analysis | Request COA |
| SDS | Safety Data Sheet for handling and storage | Request SDS |
Frequently Asked Questions
What is Micromax 0004A?
Micromax 0004A is an ESD stable thick film paste formulated for chip resistor applications requiring superior electrostatic protection. It combines exceptional ESD stability, excellent power handling, low Quan-Tech noise, and well controlled TCRs for reliable resistor production.
What is the viscosity of Micromax 0004A?
Micromax 0004A exhibits a viscosity between 100 and 150 Pa.s when measured with Brookfield HAT at 10 rpm, SC4-14/6R spindle, 25°C.
What is the recommended drying and firing profile for Micromax 0004A?
Recommended processing includes leveling for 5-10 minutes, drying for 10-15 minutes, followed by firing at 850°C peak temperature held for 10 minutes on a 30-minute total cycle.
What is the recommended dried film thickness for Micromax 0004A?
Micromax 0004A is optimized for 18-22 μm dried film thickness using 250-325 mesh screens with 10-15 μm emulsion.
What is the ESD performance of Micromax 0004A?
Micromax 0004A delivers exceptional ESD stability using a 100pF/1500Ω R/C network, making it well-suited for chip resistors used in ESD-sensitive circuit designs.
Is Micromax 0004A environmentally compliant?
Yes. Micromax 0004A contains no intentionally added cadmium, nickel or phthalates, meeting RoHS and REACH environmental compliance requirements.
What terminations are compatible with Micromax 0004A?
Micromax 0004A is compatible with high silver terminations, with reported properties obtained using Micromax 5426 Ag/Pd termination. Other termination systems are also available.
What packaging sizes are available for Micromax 0004A?
Micromax 0004A is supplied in 100G and 1000G containers. For larger volume requirements, please contact our sales team to discuss supply arrangements.
Get Micromax 0004A Bulk Pricing and Technical Support
We supply genuine Micromax 0004A ESD stable chip resistor paste for electronic component manufacturing. Contact us for bulk pricing, sample availability, technical documents, and application support.
Inquire Bulk Price & Technical Support
Disclaimer: All technical data on this page are for general guidance only and are not product specifications. Buyers must carry out independent trials and verify suitability before bulk ordering. Actual values may vary between production lots.
