Hostaform S 9244 XAP2 LS – Impact Modified UV Stabilized POM-C

描述

Hostaform S 9244 XAP2 LS is an impact modified, UV stabilized, elastomer-containing POM‑C (Polyoxymethylene Copolymer) injection molding grade, genuinely manufactured by Celanese and imported as original product. As an authorized distributor and trader, we supply genuine material with full traceability and direct access to official Celanese technical documentation.

This unfilled acetal copolymer contains elastomer modifiers that deliver higher impact strength than standard acetal copolymers. The “LS” designation indicates UV stabilization (Light Stabilized), providing enhanced weathering resistance for demanding outdoor and automotive applications. The “XAP2” designation indicates Celanese’s low emission technology, with emission according to VDA 275 <5 mg/kg.

Hostaform S 9244 XAP2 LS offers a unique combination of impact resistance, good weld strength, UV stability, and reduced emissions—making it an ideal choice for automotive interior and exterior applications where cabin air quality and long-term weatherability are critical. Compared to the basic type HOSTAFORM C 9021, this grade exhibits slightly lower hardness, rigidity, and chemical resistance, but delivers significantly higher impact strength and good weld strength.

We hold regular stock of Hostaform S 9244 XAP2 LS, supporting small trial orders and large‑volume bulk shipments for automotive, industrial, and consumer applications.

Key Features of Hostaform S 9244 XAP2 LS

• Impact Modified – Elastomer-containing grade offering higher impact strength than standard acetal copolymers

• UV Stabilized (LS) – Light stabilized formulation for enhanced weathering resistance and long-term outdoor durability

• Good Weld Strength – Special formulation provides good weld strength, critical for complex part geometries

• Low Emission Technology – XAP2 low emission technology; emission according to VDA 275 <5 mg/kg

• Excellent Impact Resistance – Notched impact strength of 18 kJ/m² at 23°C and 12 kJ/m² at -30°C

• High Ductility – Nominal strain at break of >50%

• Good Stiffness – Tensile modulus of 1450 MPa

• Good Heat Resistance – Melting temperature of 166°C

• Good Electrical Properties – CTI of 600V

• Heavy‑Metal Free – Environmentally friendly formulation

• Contains Release Agent – Facilitates easy demolding during processing

Typical Applications for Hostaform S 9244 XAP2 LS

Explore our full range of engineering plastics solutions for more industry‑specific case studies. See also our full POM product portfolio .

Material Advantages of Hostaform S 9244 XAP2 LS

What makes Hostaform S 9244 XAP2 LS the preferred material for impact-resistant, UV-stabilized, and low emission applications? Below are its core practical advantages:

Higher Impact Strength vs. Standard POM
Hostaform S 9244 XAP2 LS offers higher impact strength than the basic type HOSTAFORM C 9021. With notched impact strength of 18 kJ/m² at 23°C and 12 kJ/m² at -30°C, it delivers reliable performance in demanding applications where standard POM grades would fall short.

UV Stabilization (LS) for Outdoor Durability
The “LS” (Light Stabilized) designation indicates UV stabilization, providing enhanced weathering resistance and long-term color stability for demanding outdoor and automotive applications. This makes it suitable for components exposed to direct sunlight and harsh environmental conditions.

Good Weld Strength for Complex Geometries
The special elastomer formulation provides good weld strength, making it ideal for complex part geometries with multiple gate injection points. This ensures structural integrity at weld lines where standard POM grades often show weakness.

XAP2 Low Emission Technology
The “XAP2” designation indicates Celanese’s proprietary low emission technology, with emission according to VDA 275 <5 mg/kg. This makes it especially suitable for automotive interior applications with strict cabin air quality requirements.

High Ductility with Excellent Toughness
With a nominal strain at break of >50% and notched impact strength of 18 kJ/m² at 23°C, this material offers exceptional toughness while maintaining high ductility. The high ductility allows parts to deform without fracturing under impact or stress.

Good Heat Resistance
Melting temperature of 166°C and heat deflection temperature of 68°C at 1.8 MPa ensure thermal stability during processing and service.

Good Electrical Properties
Volume resistivity of 1E11 Ω·m and CTI of 600V make it suitable for electrical and electronic applications.

Heavy‑Metal Free
Environmentally friendly, heavy‑metal‑free formulation.

Batch‑to‑Batch Consistency
Celanese manufactures this grade under strict ISO quality standards for consistent property across shipments.

Reliable Supply
We maintain active inventory and stable supply chains for Hostaform S 9244 XAP2 LS. For more supply‑chain details, visit our company background page .

Typical Properties (ISO Standards)

Typical properties of Hostaform S 9244 XAP2 LS measured to ISO standards are listed below:

Important Notes on Typical Data:

1. Values listed are typical and sourced from Celanese official data sheets for Hostaform S 9244 XAP2 LS. They do not constitute binding product specification.

2. Batch‑to‑batch deviations may exist. For critical applications, validate performance with batch‑specific COA certificate.

3. Final part performance depends on component design, processing parameters and end‑use environment.

4. Celanese original TDS shall serve as definitive technical reference. Request the latest official Hostaform S 9244 XAP2 LS TDS from our sales team.

Processing Guidelines (Injection Molding)

Recommended processing parameters for Hostaform S 9244 XAP2 LS:

Critical Processing Warnings for Hostaform S 9244 XAP2 LS:

• Low Melt Flow Processing: With MVR of 1.4 cm³/10min, Hostaform S 9244 XAP2 LS is a low flow grade. Ensure adequate injection pressure and mold temperature to achieve complete filling of complex parts.

• Drying: Drying is not normally required. If material has come into contact with moisture through improper storage, drying at 100°C for 3-4 hours is recommended.

• Low Emission Property: To maintain XAP2 low emission characteristics (VDA 275 <5 mg/kg), avoid contamination and ensure proper processing conditions.

• UV Stabilization: The LS UV stabilization additives are fully dispersed in the base resin; standard processing conditions will not degrade UV performance.

• Thermal Degradation Risk: POM‑based material can decompose under excessive heat and release formaldehyde vapors. Guarantee sufficient ventilation; avoid overly long barrel residence times.

• Material Purity Requirement: Strictly prevent cross‑contamination with other polymer grades. Contamination will degrade the impact-modified, UV stabilized, and low emission properties.

• Weld Strength: To maximize weld strength, ensure proper melt temperature and injection speed for optimal polymer chain entanglement at weld lines.

• Regrind / Recycled Material Notice: We do not recommend adding regrind for this specialty grade. Reprocessing may compromise the impact properties, weld strength, UV stabilization, and XAP2 low emission characteristics. If regrind usage is mandatory, keep percentage below 10% and complete pre‑validation testing first.

• Storage Guidance: Store pellets in cool, dry conditions; keep sealed in original factory packaging whenever possible to maintain low emission characteristics and UV stabilization effectiveness.

Related Products

• Explore Our Full POM Product Portfolio – Browse all POM copolymer and homopolymer grades we supply

• Impact Modified POM Grades – Discover other high-impact grades for demanding applications

• UV Stabilized POM Grades – View grades with UV stabilization and weathering resistance

• Low Emission POM (XAP2 Series) – Discover low VOC, low odor grades for automotive interior applications

• Hostaform S 9244 XAP2 – View the non-UV stabilized version

• About Our Company – Learn more about our supply capabilities and quality assurance

Technical Documents

We provide complete supporting documentation for material selection and compliance verification.

Request any document above by:

• Email: ruiqingchem@gmail.com

• Online form: Our contact page

We reply within one working business day. Please clearly state material grade (Hostaform S 9244 XAP2 LS) and document type you require.

External Reference

For further authoritative information, please refer to the official Celanese Hostaform product portal and the latest material datasheets for Hostaform S 9244 XAP2 LS.

Key technical standards referenced in this document include:

• ISO 1043 / ISO 11469 – Resin identification and part marking

• ISO 1183 – Density measurement

• ISO 527 – Tensile properties

• ISO 178 – Flexural properties

• ISO 179/1eU / 1eA – Impact resistance

• ISO 75-1/-2 – Heat deflection temperature

• ISO 1133 – Melt volume-flow rate

• ISO 11357-1/-3 – Melting temperature

• ISO 294-4, 2577 – Mold shrinkage

• ISO 11359-1/-2 – Coefficient of linear thermal expansion

• ISO 62 – Water/humidity absorption

• IEC 62631 – Electrical properties

• IEC 60112 – Comparative Tracking Index (CTI)

• VDA 275 – Automotive interior emission testing

• DAIMLER DBL 5404 – Automotive OEM specification

Our technical team can supply relevant standard excerpts for your engineering reference.

FAQ

Q1: What is Hostaform S 9244 XAP2 LS and what is it used for?
A: Hostaform S 9244 XAP2 LS is an impact modified, UV stabilized, elastomer-containing POM‑C (Polyoxymethylene Copolymer) injection molding grade. The “XAP2” designation indicates Celanese’s low emission technology with VDA 275 <5 mg/kg. The “LS” designation indicates UV stabilization (Light Stabilized) for enhanced weathering resistance. It is widely used in automotive interior and exterior components, gears, bearings, door locks, seat belt systems, outdoor equipment, electrical & electronics (connectors, switches, housings), and consumer goods.

Q2: What does “S 9244 XAP2 LS” mean in the grade name?
A: S indicates impact modified / super-toughened grade within the POM family. 9244 is the specific grade designation. XAP2 denotes Celanese’s proprietary low emission technology for reduced VOC emissions and low odor. LS stands for Light Stabilized (UV stabilized).

Q3: What is the difference between Hostaform S 9244 XAP2 and S 9244 XAP2 LS?
A: Both grades share similar impact-modified and low emission properties. The key difference is the LS UV stabilization in S 9244 XAP2 LS, which provides enhanced weathering resistance and long-term color stability for outdoor and automotive exterior applications.

Q4: What is the difference between Hostaform S 9244 XAP2 LS and S 9243 XAP2 LS?
A: S 9244 XAP2 LS offers higher ductility (nominal strain at break >50% vs. 40%), higher notched impact strength (18 kJ/m² vs. 15 kJ/m² at 23°C), and lower stiffness (1450 MPa vs. 1950 MPa tensile modulus). It is designed for applications requiring maximum impact resistance and ductility.

Q5: What are the key mechanical properties?
A: Tensile modulus 1450 MPa, yield stress 33 MPa, nominal strain at break >50%, Charpy notched impact strength 18 kJ/m² (23°C) and 12 kJ/m² (-30°C), melting temperature 166°C, and heat deflection temperature 68°C at 1.8 MPa.

Q6: What is the MVR of this material?
A: Melt‑volume‑flow‑rate equals 1.4 cm³/10min measured under 190°C / 2.16 kg test condition.

Q7: Is this material UV stabilized?
A: Yes. The “LS” designation indicates UV stabilization (Light Stabilized), providing enhanced weathering resistance and long-term color stability for outdoor and automotive applications.

Q8: Is this material suitable for automotive applications?
A: Yes. Hostaform S 9244 XAP2 LS features low emissions (VDA 275 <5 mg/kg), UV stabilization for long-term weatherability, and meets DAIMLER DBL 5404 automotive OEM specification.

Q9: Is drying required before processing?
A: Drying is not normally required. If material has come into contact with moisture through improper storage, drying at 100°C for 3-4 hours is recommended.

Q10: What are recommended processing‑temperature windows?
A: Optimum melt temperature: 190-200°C; Optimum mold temperature: 60-80°C.

Q11: What is the density of this material?
A: The density is 1260 kg/m³.

Q12: What sustainable versions are available?
A: ECO-B versions offer the same properties and performance but are produced with sustainability in mind using a mass-balance approach with biogenic feedstocks, ISCC certified.

Q13: Can I buy this material and what is lead‑time?
A: Yes. Submit your inquiry via our quick inquiry form or email ruiqingchem@gmail.com, specify quantity, application and delivery address. Regular orders 1‑5 tons ship within 7‑10 working days after payment confirmation. Large‑volume or urgent orders can be negotiated separately.

Q14: What are limitations?
A: POM‑C does not resist strong mineral acids, powerful oxidizing agents, or continuous exposure to hot water >80°C. This grade has slightly lower chemical resistance than unmodified POM types. Consult our technical team for chemical‑compatibility data for your exact working environment.

CTA (Call to Action)

Ready to order Hostaform S 9244 XAP2 LS?

To get precise quotation and professional technical support, please share these details:

• Required quantity (kg or tons)

• Destination port or delivery address

• Target application and part brief (automotive interior/exterior, UV-exposed components, impact-resistant parts, etc.)

• Color requirements (natural, LS series UV stabilized colors, or custom color)

• Core performance requirements (impact resistance, UV stability, low emission, weld strength, etc.)

• Sustainable version preference (standard or ECO-B)

• Document requirement (TDS, SDS, VDA 275 emission report, UV/weathering test reports, DAIMLER DBL 5404 compliance, etc.)

Sample Policy:

• Samples are for laboratory validation tests only, not for production use.

• Buyer bears international sample‑shipping freight.

• If bulk‑material performance deviates from sample reference, Celanese official TDS serves as authoritative benchmark.

Take action now:

• Send Inquiry – Use our quick inquiry form

• Email Us – ruiqingchem@gmail.com

• Live Chat – Click bottom‑right chat widget to speak directly with our team

After-Sales Support

Disclaimer

DISCLAIMER: All technical data is referenced from original Celanese typical values for Hostaform S 9244 XAP2 LS. Our company acts as authorized distributor/trader rather than original manufacturer. Final component performance depends on part geometry, processing setup and end‑use environment. Buyers shall independently validate material suitability for individual applications. Our firm bears no liability for finished‑part failure caused by improper design or improper processing. Always reference latest Celanese official TDS of Hostaform S 9244 XAP2 LS as definitive specification.