描述
Fortron ICE 716A is a linear, semi-crystalline, flame retardant polyphenylene sulfide (PPS) grade reinforced with 65% mineral and glass fiber . This grade belongs to Celanese’s ICE (Improved Crystallization Evolution) product family, featuring faster crystallization rates and improved processing efficiency for reduced cycle times .
Fortron ICE 716A is the faster crystallizing version of Fortron 6165A6, offering similar characteristics with improved crystallization efficiency and reduced cycle time . The ICE technology enables faster cycle times while maintaining the outstanding mechanical properties, chemical resistance, and thermal stability expected from high-performance PPS.
As a linear, semi-crystalline PPS, Fortron ICE 716A is relatively impermeable to gases, hydrocarbons, and other liquids compared to other materials . It provides good flow, high dimensional stability, low coefficient of friction, low shrinkage, excellent mechanical properties, creep resistance at high temperatures, a high continuous use temperature (160°C to 240°C), and very low moisture absorption .
This grade offers high hardness, high rigidity, and excellent heat resistance under load bearing conditions . It exhibits excellent resistance to corrosion, hydrolysis, oxidation, and paraffin buildup and shows excellent chemical resistance to all solvents below 200°C, acids, bases, typical and alternative automotive fuels, and petroleum fluids at elevated temperatures .
For more PPS grades and technical information, please visit our PPS/Polyphenylene Sulfide product page. You can also explore Celanese’s official Fortron PPS portfolio for additional manufacturer insights.
Key Features of Fortron ICE 716A
| # | Feature | Benefit |
|---|---|---|
| 1 | ICE Technology – Fast Crystallizing | Faster crystallization and reduced cycle times compared to Fortron 6165A6 |
| 2 | 65% Mineral/Glass Reinforcement | Exceptional stiffness, dimensional stability, and low creep |
| 3 | Ultra-High Stiffness | Tensile modulus of 19,000 MPa; flexural modulus of 18,800 MPa |
| 4 | High Strength | Tensile strength of 130 MPa |
| 5 | Excellent Heat Resistance | HDT of 270°C at 1.80 MPa |
| 6 | Good Flow | Good processability for injection molding |
| 7 | Inherent Flame Retardancy | V-0 flame retardant (halogen-free) |
| 8 | Good Impact Properties | Charpy notched impact of 7 kJ/m² at 23°C and -30°C |
| 9 | Excellent Chemical Resistance | Insoluble in all known solvents below 200°C |
| 10 | Very Low Moisture Absorption | Ensures dimensional stability in humid environments |
| 11 | Excellent Dimensional Stability | Low shrinkage: 0.2% parallel, 0.5% transverse |
| 12 | Low Thermal Expansion | CTE parallel: 19 × 10⁻⁶/K; CTE normal: 24 × 10⁻⁶/K |
| 13 | Versatile Processing | Suitable for injection molding; suitable for lead-free soldering and metal replacement |
| 14 | Regulatory Compliance | RoHS, PFOS, and PFOA compliant |
Typical Applications for Fortron ICE 716A
| Industry | Typical Components & Considerations |
|---|---|
| High-Load Structural Components | Parts requiring ultra-high stiffness, dimensional stability, and low creep at elevated temperatures |
| Automotive | Under-the-hood components, engine parts, transmission components, pump housings – requiring chemical resistance to fuels and heat stability |
| Electrical & Electronics | Connectors, sensors, coil bobbins, relay housings – requiring V-0 flammability, heat resistance, and dimensional stability |
| Industrial | Pump and valve components, chemical processing equipment, high-temperature bearings – utilizing excellent corrosion resistance |
| Metal Replacement | Applications requiring lighter, high-performance alternative to metal with exceptional stiffness |
| Lead-Free Soldering | Electronic components suitable for lead-free soldering processes |
Typical Properties of Fortron ICE 716A
| Property | Value | Test Method |
|---|---|---|
| Physical | ||
| Density | 1.95 – 2.00 g/cm³ | ISO 1183 / ASTM D792 |
| Water Absorption (Saturation) | <0.02% | ISO 62 |
| Molding Shrinkage – Parallel | 0.2% | ISO 294-4 |
| Molding Shrinkage – Transverse | 0.5% | ISO 294-4 |
| Mechanical | ||
| Tensile Modulus | 19,000 MPa | ISO 527 |
| Tensile Strength at Break | 130 MPa | ISO 527 |
| Tensile Strain at Break | 1.2% | ISO 527 |
| Flexural Modulus | 18,800 MPa | ISO 178 |
| Compression Strength | 230 MPa | — |
| Impact | ||
| Charpy Unnotched Impact (23°C) | 20 kJ/m² | ISO 179/1eU |
| Charpy Unnotched Impact (-30°C) | 20 kJ/m² | ISO 179/1eU |
| Charpy Notched Impact (23°C) | 7 kJ/m² | ISO 179/1eA |
| Charpy Notched Impact (-30°C) | 7 kJ/m² | ISO 179/1eA |
| Thermal | ||
| Melting Temperature | 280°C | ISO 11357 |
| Glass Transition Temperature | 90°C | ISO 11357 |
| HDT @ 1.80 MPa | 270°C | ISO 75 |
| HDT @ 8.00 MPa | 215°C | ISO 75 |
| Continuous Use Temperature | 160 – 240°C | — |
| CTE – Parallel | 19 × 10⁻⁶/K | ISO 11359 |
| CTE – Normal | 24 × 10⁻⁶/K | ISO 11359 |
| Electrical | ||
| Volume Resistivity | >1×10¹³ Ω·m | IEC 62631 |
| Surface Resistivity | >1×10¹⁵ Ω | IEC 62631 |
| Relative Permittivity (1MHz) | 5.6 | IEC 62631 |
| Dissipation Factor (1MHz) | 20 × 10⁻⁴ | IEC 62631 |
| Flammability | ||
| Flammability | V-0 | UL 94 |
Important Notes on Typical Data
📌 Values are typical – The data listed above is sourced from manufacturer data sheets for reference only and does not constitute binding product specifications for Fortron ICE 716A.
📌 Batch variations – Batch-to-batch deviations may exist. For critical applications, validate performance with batch-specific COA certificates.
📌 Final performance – Actual performance depends on processing conditions and part design. Refer to ISO testing standards for detailed methodology.
📌 Authoritative reference – The manufacturer’s official TDS shall serve as the definitive technical reference for Fortron ICE 716A. Request the latest official TDS from our sales team.
Processing Guidelines for Fortron ICE 716A
| Step | Process |
|---|---|
| Processing Methods | Injection Molding |
| Drying Recommended | Yes |
| Drying Temperature | 130 – 140°C |
| Drying Time (Dehumidified Dryer) | 2 – 4 hours |
| Suggested Max Moisture | ≤ 0.02% |
| Optimum Melt Temperature | 330 – 340°C |
| Min. Melt Temperature | 320°C |
| Max. Melt Temperature | 340°C |
| Manifold / Hot Runner Temperature | 330 – 340°C |
| Optimum Mold Temperature | 150°C |
| Min. Mold Temperature | 140°C |
| Max. Mold Temperature | 160°C |
| Hold Pressure Range | 30 – 70 MPa |
| Back Pressure | ≤ 3.5 MPa |
| Storage | Store in original, sealed packaging in a cool, dry place away from direct sunlight |
Critical Processing Warnings for Fortron ICE 716A
⚠️ ICE Technology Advantage – Fortron ICE 716A is a faster crystallizing version of Fortron 6165A6 . The ICE technology enables faster cycle times and improved processing efficiency. The potential for cycle time reduction must be checked individually and depends on process and part design.
⚠️ Drying Requirement – Fortron ICE 716A requires drying prior to processing. Because of the necessary low maximum residual moisture content, the use of dry air dryers is recommended. The time between drying and processing should be as short as possible.
⚠️ Moisture Control – Maximum residual moisture content should be ≤ 0.02%. Proper drying is essential to prevent void formation and ensure optimal part quality.
⚠️ Melt Temperature – The recommended melt temperature range is 330–340°C . Avoid exceeding 340°C to prevent material degradation.
⚠️ Highest Filler Content Grade – With 65% mineral/glass reinforcement, this grade has one of the highest filler contents in the Fortron PPS portfolio. This requires careful consideration for equipment wear and proper screw design.
⚠️ Excellent Load Bearing Performance – This grade is specifically designed for applications requiring heat resistance under load bearing conditions . Ensure proper part design to maximize performance.
⚠️ Storage – Store in original, sealed packaging in a cool, dry place away from direct sunlight. For subsequent storage, the material should be stored dry until processed.
Comparison: Fortron ICE 716A vs. Fortron 6165A6
| Feature | Fortron ICE 716A | Fortron 6165A6 |
|---|---|---|
| Filler Content | 65% Mineral/Glass | 65% Mineral/Glass |
| Key Feature | ICE Technology – faster crystallizing | Standard crystallization |
| Cycle Times | Reduced | Standard |
| Tensile Modulus | 19,000 MPa | ~19,000 MPa |
| Tensile Strength | 130 MPa | ~130 MPa |
| HDT @ 1.80 MPa | 270°C | 270°C |
| Density | 1.95 g/cm³ | ~1.95 g/cm³ |
| Charpy Notched Impact | 7 kJ/m² | ~7 kJ/m² |
| Primary Application | Fast cycle, high-load structural components | High-load structural components |
Related Products
-
PPS/Polyphenylene Sulfide – View our full range of PPS products
-
Fortron 6165A6 – 65% mineral/glass reinforced PPS, standard grade
-
Fortron 6165A4 – 65% mineral/glass reinforced PPS, standard flow grade
-
Fortron ICE 504L – Fast crystallizing 40% glass reinforced PPS
-
Explore Engineering Plastics – Browse all engineering plastic materials
-
About Our Company – Learn more about our supply capabilities and quality assurance
Technical Documents for Fortron ICE 716A
| Document Type | Description & Source |
|---|---|
| Manufacturer Official TDS | Complete physical, thermal, and mechanical properties of Fortron ICE 716A |
| Manufacturer Official SDS | GHS-compliant safety documentation |
| COA (Certificate of Analysis) | Batch-specific quality certification for Fortron ICE 716A |
| UL Yellow Card | UL safety certification (E107854) |
Request any document above by:
📧 Email: ruiqingchem@gmail.com
📝 Online form: Our contact page
We reply within one working business day. Please clearly state product (Fortron ICE 716A) and document type you require.
FAQ about Fortron ICE 716A
Q1: What is Fortron ICE 716A?
A: Fortron ICE 716A is a 65% mineral and glass fiber reinforced PPS injection molding grade from Celanese featuring ICE (Improved Crystallization Evolution) technology for faster crystallization and reduced cycle times .
Q2: What does “ICE” stand for?
A: “ICE” stands for Improved Crystallization Evolution – Celanese’s innovative platform technology that enables faster crystallization and improved processing efficiency .
Q3: What are the key features of Fortron ICE 716A?
A: 65% mineral/glass reinforcement; ICE fast crystallization technology; tensile modulus 19,000 MPa; tensile strength 130 MPa; HDT 270°C; flexural modulus 18,800 MPa; V-0 flame retardant; excellent chemical resistance.
Q4: How does Fortron ICE 716A compare to Fortron 6165A6?
A: Fortron ICE 716A is the faster crystallizing version of Fortron 6165A6, offering similar characteristics with improved crystallization efficiency and reduced cycle time .
Q5: What are the typical applications for Fortron ICE 716A?
A: High-load structural components, automotive under-hood components, electrical and electronic components, industrial pump and valve parts, metal replacement applications, and lead-free soldering applications .
Q6: What is the recommended drying condition for Fortron ICE 716A?
A: Dry at 130–140°C for 2–4 hours using a dehumidified air dryer. Maximum residual moisture should be ≤ 0.02%.
Q7: What is the density of Fortron ICE 716A?
A: 1.95 g/cm³ (1950 kg/m³) .
Q8: What is the HDT @ 1.80 MPa of Fortron ICE 716A?
A: 270°C .
Q9: What regions is Fortron ICE 716A available in?
A: North America, Europe, Asia Pacific, Latin America, Africa & Middle East.
Q10: Is Fortron ICE 716A flame retardant?
A: Yes, it is inherently flame-retardant (V-0).
Q11: What is the tensile modulus of Fortron ICE 716A?
A: 19,000 MPa .
Q12: What is the Charpy notched impact strength of Fortron ICE 716A?
A: 7 kJ/m² at 23°C and -30°C .
Q13: Is Fortron ICE 716A RoHS compliant?
A: Yes, it complies with RoHS, PFOS, and PFOA regulations .
Q14: Is Fortron ICE 716A suitable for lead-free soldering?
A: Yes, it is suitable for lead-free soldering applications .
Q15: What is the mold temperature range for Fortron ICE 716A?
A: 140 – 160°C .
Q16: What is the melt temperature range for Fortron ICE 716A?
A: 330 – 340°C .
CTA (Call to Action)
Ready to order Fortron ICE 716A?
To get a precise quotation and professional technical support for Fortron ICE 716A, please share:
-
Required quantity (kg)
-
Destination port or delivery address
-
Target application (automotive, electronics, industrial, high-load structural, etc.)
-
Document requirements (TDS, SDS, COA, UL docs)
Sample Policy:
-
Samples of Fortron ICE 716A are for laboratory validation tests only, not for production use.
-
Buyer bears international sample-shipping freight.
-
If bulk-product performance deviates from sample reference, the manufacturer’s official TDS serves as the authoritative benchmark.
Take action now:
📧 Email Us – ruiqingchem@gmail.com
📝 Send Inquiry – Use our quick inquiry form
💬 Live Chat – Click the bottom-right chat widget to speak directly with our team
After-Sales Support
| Service | Details |
|---|---|
| Quality Inspection Period | All quality-related claims must be submitted within 7 working days after delivery, supported by test data and photographic evidence. |
| Return / Exchange Policy | Confirmed product defects caused by our side trigger replacement or refund. Terms and conditions apply. |
| Logistics Damage | Report shipping damage directly to carrier immediately upon goods receipt. We assist with claim-document preparation. |
| Technical Support | Remote technical guidance available. On-site troubleshooting can be arranged upon special request. |
| Export Documentation | We supply commercial invoice, packing list, bill of lading, COA, and additional compliance certificates on request. |
Disclaimer
DISCLAIMER: All technical data is referenced from original manufacturer typical values for Fortron ICE 716A. Our company acts as supplier/trader rather than original manufacturer. Final performance depends on processing conditions and part design. Buyers shall independently validate product suitability for individual applications. Our firm bears no liability for product failure caused by improper processing or improper usage. Always reference the latest manufacturer official TDS of Fortron ICE 716A as the definitive specification.
