Description
Description
Exxtra Adhere EAA30010 is a high-melt-index ethylene acrylic acid copolymer resin containing 10 wt% acrylic acid comonomer.
With a typical estimated melt index of 30 g/10 min, EAA30010 combines easy processing with strong adhesion to polar materials. It is suitable for powder coating, masterbatch, heat-seal layer, and adhesive applications.
This grade can also be formulated and UV-stabilized for selected outdoor applications.
Key Features
- High melt index for easy processing and formulation
- Contains 10 wt% acrylic acid comonomer
- Strong adhesion to polar materials and substrates
- Suitable as a base resin for masterbatch formulations
- Can be formulated and UV-stabilized for selected outdoor applications
- Contains no antiblock, slip, or thermal stabilizer additives
Typical Applications
- Powder coating for polar substrates
- Masterbatch base resin
- Heat-seal layers
- Adhesive applications
- Selected UV-stabilized outdoor formulations
Application suitability should be confirmed under actual formulation, processing, and end-use conditions before commercial use.
Typical Properties
| Property | Typical Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.937 | g/cm3 | ASTM D1505 |
| Melt Index, 190°C / 2.16 kg | 30* | g/10 min | ASTM D1238 |
| Acrylic Acid Content | 10 | wt% | ExxonMobil Method |
| Melting Peak Temperature | 95 | °C | ExxonMobil Method |
| Vicat Softening Temperature | 71 | °C | ASTM D1525 |
*The melt index value is an estimate based on the manufacturer’s correlation from melt-flow-rate data measured under other standard conditions. Technical data is based on the manufacturer’s published product information. Values shown are typical and should not be interpreted as guaranteed specifications. Review the latest official TDS before use.
Processing Guidelines
Processing conditions should be optimized according to the formulation, equipment, substrate, and intended application.
- Use corrosion-resistant metals or suitable nickel/chrome plating for surfaces exposed to molten resin.
- Feed Exxtra Adhere resin into the extruder after LDPE with a similar or higher melt index.
- Completely purge the equipment with LDPE or a suitable cleaning compound before shutdown.
- LDPE with a lower melt flow than EAA30010 is preferred for purging.
- Do not shut down processing equipment while Exxtra Adhere resin remains inside.
Additives and Regulatory Information
- Additives: None
- Antiblock: No
- Slip: No
- Thermal Stabilizer: No
For potential food-contact applications, customers must review the latest supplier compliance documentation and confirm suitability for applicable FDA, EU, HPFB, or other regional requirements.
Exxtra Adhere EAA30010 is not intended for use in medical applications.
Supply and Documentation
Product form: Pellets
Contact us to confirm current packaging, regional availability, minimum order quantity, lead time, and sample options. TDS, SDS, COA, and available regulatory documents can be provided upon request.
For an accurate quotation, please provide your required quantity, delivery destination, intended application, and required documentation.
Frequently Asked Questions
What is Exxtra Adhere EAA30010?
Exxtra Adhere EAA30010 is a high-melt-index ethylene acrylic acid copolymer resin containing 10 wt% acrylic acid comonomer.
What is the melt index of EAA30010?
The typical estimated melt index is 30 g/10 min, measured at 190°C with a 2.16 kg load.
What is the acrylic acid content of EAA30010?
Exxtra Adhere EAA30010 has a typical acrylic acid content of 10 wt%.
What are the main applications of EAA30010?
Typical applications include powder coating for polar substrates, masterbatch base resin, heat-seal layers, and adhesive formulations.
Which materials can EAA30010 adhere to?
EAA30010 provides strong adhesion to polar materials. Final performance depends on the substrate, formulation, surface condition, and processing conditions.
Can EAA30010 be used for outdoor applications?
Yes. EAA30010 can be formulated and UV-stabilized for selected outdoor applications. Final performance should be confirmed through application testing.
Does EAA30010 contain slip or antiblock additives?
No. EAA30010 contains no slip, antiblock, or thermal stabilizer additives.
What precautions are required when processing EAA30010?
Use corrosion-resistant equipment surfaces and completely purge the processing equipment with LDPE or a suitable cleaning compound before shutdown.
Can EAA30010 be used for food-contact applications?
Potential food-contact suitability depends on the intended application and applicable regulations. Review the latest supplier compliance documentation before commercial use.
Can TDS, SDS, COA, or samples be provided?
TDS, SDS, COA, available regulatory documents, and evaluation samples may be provided upon request, subject to availability.
Request Product Information
Contact RuiQingChem for current EAA30010 availability, pricing, technical documents, or evaluation samples. For a faster response, include your required quantity, delivery destination, intended application, and expected purchasing schedule.
Request EAA30010 Pricing and Product Documents
The information provided on this page is intended for general product-selection guidance. Customers are responsible for testing the product under actual processing conditions and confirming its suitability, safety, and regulatory compliance for the intended application. Product names and trademarks belong to their respective owners.
