描述
NORYL SE1X Resin is a non-reinforced blend of polyphenylene ether (PPE) and high impact polystyrene (HIPS), manufactured by SABIC. This injection moldable grade contains non-brominated, non-chlorinated flame retardant and carries a UL94 flame rating of V-0/V-1 at 1.5mm, along with a UL746C Outdoor Suitability rating of F1.
NORYL SE1X Resin offers strong electrical performance, low moisture absorption, dimensional stability, and hydrolytic stability. The material is PFAS-free and exhibits low warpage, low shrinkage, and low specific gravity. It is commercially active in the Americas and Asia Pacific regions. Physical property data is determined using test methods established by UL, the globally recognized safety certification organization.
For more NORYL grades and technical information, please visit our PPO/PPE product page.
Key Features of NORYL SE1X Resin
-
Non-Reinforced PPE/HIPS Blend – Unfilled formulation for balanced performance and predictable processing
-
Halogen-Free Flame Retardant – Non-brominated, non-chlorinated flame retardant system
-
UL94 V-0/V-1 Rated – V-0/V-1 at 1.5mm thickness
-
UL746C F1 Outdoor Suitability – Suitable for outdoor exposure with UV and weather resistance
-
Strong Electrical Performance – Volume resistivity of 1.00E+16 Ω.cm (ASTM D257)
-
Low Moisture Absorption – Water absorption of 0.060% (24 hrs)
-
Dimensional Stability – Low warpage and low shrinkage (0.5–0.7% flow, 3.2mm)
-
Hydrolytic Stability – Resists degradation in wet environments
-
Low Specific Gravity – Density of 1.10 g/cm³
-
Low Warpage – Minimizes deformation during processing and use
-
Amorphous – Low shrinkage characteristics
-
PFAS-Free – Does not contain PFAS intentionally added
-
Injection Moldable – Suitable for standard injection molding processes
-
RoHS Compliant – Meets global environmental standards
Typical Applications for NORYL SE1X Resin
| Industry | Typical Components & Considerations |
|---|---|
| Electrical & Electronics | Indoor and outdoor electrical enclosures, housings – UL94 V-0/V-1, UL746C F1, strong electrical performance |
| Electrical & Electronics | Electronic components, mobile phones, computers, tablets – dimensional stability, low moisture absorption |
| Renewable Energy | Solar / Photovoltaic (PV) junction boxes – UL746C F1 outdoor rating, hydrolytic stability |
| HVAC | Heating, ventilation, and air conditioning applications – heat resistance, dimensional stability |
| Building & Construction | Building components – flame retardant, dimensional stability |
| Home Appliances | Home and commercial appliances – heat resistance, flame retardancy |
| Industrial | Electrical and industrial components – flame retardant, dimensional stability |
Typical Properties of NORYL SE1X Resin
| Property | Value | Test Method |
|---|---|---|
| Physical | ||
| Density / Specific Gravity | 1.10 g/cm³ | ASTM D792 |
| Water Absorption (24 hrs) | 0.060% | ASTM D570 |
| Linear Mold Shrinkage, Flow (3.2mm) | 0.5 – 0.7% | SABIC Method |
| Linear Mold Shrinkage, Transverse | 0.5 – 0.7% | SABIC Method |
| Mechanical (ASTM) | ||
| Tensile Stress, Yield (Type I, 50 mm/min) | 65 MPa | ASTM D638 |
| Tensile Stress, Break (Type I, 50 mm/min) | 53 MPa | ASTM D638 |
| Tensile Strain, Yield (Type I, 50 mm/min) | 4% | ASTM D638 |
| Tensile Strain, Break (Type I, 50 mm/min) | 15% | ASTM D638 |
| Tensile Modulus (50 mm/min) | 2500 MPa | ASTM D638 |
| Flexural Stress, Yield (1.3 mm/min, 50 mm span) | 100 MPa | ASTM D790 |
| Flexural Modulus (1.3 mm/min, 50 mm span) | 2700 MPa | ASTM D790 |
| Flexural Modulus (2.6 mm/min, 100 mm span) | 2400 MPa | ASTM D790 |
| Mechanical (ISO) | ||
| Tensile Modulus (1 mm/min) | 2670 MPa | ISO 527 |
| Tensile Stress, Yield (50 mm/min) | 61 MPa | ISO 527 |
| Tensile Stress, Break (50 mm/min) | 50 MPa | ISO 527 |
| Tensile Strain, Yield (50 mm/min) | 4.3% | ISO 527 |
| Tensile Strain, Break (50 mm/min) | 20.7% | ISO 527 |
| Flexural Modulus (2 mm/min) | 2560 MPa | ISO 178 |
| Impact (ASTM) | ||
| Notched Izod Impact (23°C, 1/8 in) | 180 J/m | ASTM D256 |
| Notched Izod Impact (-30°C, 1/8 in) | 106 J/m | ASTM D256 |
| Unnotched Izod Impact (23°C) | 2600 J/m | ASTM D4812 |
| Thermal (ASTM) | ||
| Heat Deflection Temperature (1.82 MPa) | 122°C (252°F) | ASTM D648 |
| Electrical (ASTM) | ||
| Volume Resistivity | 1.00E+16 Ω.cm | ASTM D257 |
| Flammability | ||
| UL94 Flame Rating (1.5mm) | V-0 / V-1 | UL 94 |
| UL94 Flame Rating (6.0mm) | V-0 | UL 94 |
| UL746C Outdoor Suitability | F1 | UL 746C |
| Glow Wire Flammability Index (GWFI) | 900 – 960°C | IEC 60695-2-12 |
| Glow Wire Ignition Temperature (GWIT) | 700 – 725°C | IEC 60695-2-13 |
| UL Yellow Card | E45587-100107136 | UL |
| Processing | ||
| Drying Temperature | 105 – 110°C | SABIC Method |
| Drying Time | 3 – 4 hours | SABIC Method |
| Maximum Moisture Content | ≤ 0.02% | SABIC Method |
| Melt Temperature | 280 – 310°C | SABIC Method |
| Mold Temperature | 75 – 105°C | SABIC Method |
Important Notes on Typical Data:
Values listed are typical and sourced from manufacturer data sheets. They do not constitute binding product specification.
Batch-to-batch deviations may exist. For critical applications, validate performance with batch-specific COA certificate.
Final performance depends on processing conditions and part design.
Manufacturer official TDS shall serve as definitive technical reference. Request the latest official TDS from our sales team.
Processing Guidelines for NORYL SE1X Resin
| Step | Process |
|---|---|
| Processing Method | Injection molding |
| Drying Temperature | 105 – 110°C |
| Drying Time | 3 – 4 hours |
| Maximum Moisture Content | ≤ 0.02% |
| Melt Temperature | 280 – 310°C |
| Mold Temperature | 75 – 105°C |
| Storage | Store in original, sealed packaging in a cool, dry place away from direct sunlight |
Critical Processing Warnings:
Injection Molding: This grade is specifically designed for injection molding.
Drying: Proper drying is critical to prevent hydrolysis and achieve optimal mechanical properties.
UL Compliance: This grade carries UL94 V-0/V-1 ratings at 1.5mm thickness. Ensure processing conditions maintain compliance.
UL746C F1 Rating: This grade is UL746C F1 rated for outdoor suitability.
PFAS-Free: This product does not contain PFAS intentionally added.
Storage: Store in original, sealed packaging in a cool, dry place away from direct sunlight.
Related Products for NORYL SE1X Resin
Explore Engineering Plastics – Browse all engineering plastic materials
About Our Company – Learn more about our supply capabilities and quality assurance
Technical Documents for NORYL SE1X Resin
| Document Type | Description & Source |
|---|---|
| Manufacturer Official TDS | Complete physical, thermal, and mechanical properties of NORYL SE1X |
| Manufacturer Official SDS | GHS-compliant safety documentation |
| COA (Certificate of Analysis) | Batch-specific quality certification |
| UL Yellow Card | E45587-100107136 – UL safety certification |
Request any document above by:
Email: ruiqingchem@gmail.com
Online form: Our contact page
We reply within one working business day. Please clearly state product (NORYL SE1X) and document type you require.
FAQ about NORYL SE1X Resin
Q1: What is NORYL SE1X?
A: This grade is a non-reinforced blend of PPE and HIPS from SABIC. It is an injection moldable grade with non-halogenated flame retardancy, UL94 V-0/V-1 ratings, UL746C F1 outdoor suitability, strong electrical performance, low moisture absorption, dimensional stability, and hydrolytic stability.
Q2: What are the key features of this grade?
A: Non-reinforced PPE/HIPS blend, halogen-free flame retardancy (UL94 V-0/V-1 at 1.5mm), UL746C F1 outdoor rating, strong electrical performance (volume resistivity 1.00E+16 Ω.cm), low moisture absorption (0.060% water absorption), dimensional stability, hydrolytic stability, low specific gravity (1.10 g/cm³), low warpage, low shrinkage (0.5–0.7%), PFAS-free, and RoHS compliant.
Q3: What are the typical applications for this grade?
A: Indoor and outdoor electrical enclosures, HVAC applications, solar/PV junction boxes, electronic components, mobile phones, computers, tablets, building components, and home appliances.
Q4: What is the flame rating of this grade?
A: UL94 V-0/V-1 at 1.5mm thickness and V-0 at 6.0mm thickness.
Q5: Is this grade suitable for outdoor use?
A: Yes, this grade carries a UL746C outdoor suitability rating of F1.
Q6: Is this grade halogen-free and PFAS-free?
A: Yes. It contains non-brominated, non-chlorinated flame retardant and does not contain PFAS intentionally added.
Q7: What is the recommended processing method for this grade?
A: Injection molding. Dry at 105–110°C for 3–4 hours (moisture ≤ 0.02%). Melt temperature: 280–310°C. Mold temperature: 75–105°C.
Q8: What is the UL Yellow Card number for this grade?
A: E45587-100107136.
Q9: What regions is this grade available in?
A: Americas and Asia Pacific.
Q10: What is the difference between NORYL SE1X and NORYL NH5120?
A: NORYL NH5120 is the enhanced processing version of NORYL SE1X, offering improved processability while maintaining similar property profiles.
CTA (Call to Action)
Ready to order NORYL SE1X?
To get a precise quotation and professional technical support, please share:
-
Required quantity (kg)
-
Destination port or delivery address
-
Target application (electrical enclosures, HVAC, solar PV junction boxes, etc.)
-
Color requirement
-
Document requirement (TDS, SDS, COA, UL docs, etc.)
Sample Policy:
-
Samples are for laboratory validation tests only, not for production use.
-
Buyer bears international sample-shipping freight.
-
If bulk-product performance deviates from sample reference, manufacturer official TDS serves as the authoritative benchmark.
Take action now:
-
📧 Email Us – ruiqingchem@gmail.com
-
📝 Send Inquiry – Use our quick inquiry form
-
💬 Live Chat – Click the bottom-right chat widget to speak directly with our team
After-Sales Support
| Service | Details |
|---|---|
| Quality Inspection Period | All quality-related claims must be submitted within 7 working days after delivery, supported by test data and photographic evidence. |
| Return / Exchange Policy | Confirmed product defects caused by our side trigger replacement or refund. Terms and conditions apply. |
| Logistics Damage | Report shipping damage directly to carrier immediately upon goods receipt. We assist with claim-document preparation. |
| Technical Support | Remote technical guidance available. On-site troubleshooting can be arranged upon special request. |
| Export Documentation | We supply commercial invoice, packing list, bill of lading, COA, and additional compliance certificates on request. |
Disclaimer
DISCLAIMER: All technical data is referenced from original manufacturer typical values for NORYL SE1X. Our company acts as authorized distributor/trader rather than original manufacturer. Final performance depends on processing conditions and part design. Buyers shall independently validate product suitability for individual applications. Our firm bears no liability for product failure caused by improper processing or improper usage. Always reference the latest manufacturer official TDS of NORYL SE1X as the definitive specification.
