描述
NORYL NHP9023 Resin is a 15% glass fiber reinforced blend of polyphenylene ether (PPE) and high impact polystyrene (HIPS), manufactured by SABIC . This heat stabilized and impact modified, injection moldable grade contains non-brominated, non-chlorinated flame retardant and carries a UL94 flame rating of V-0 at 1.5mm and V-1 at 0.75mm for thin-wall molding capability .
NORYL NHP9023 is based on a unique co-polymer technology and exhibits good dimensional stability, high heat resistance, strong electrical performance, and very low specific gravity . It also offers hydrolytic stability, low creep sensitivity, good stiffness, low warpage and good processability . This material is an excellent candidate for copier fuser units, business equipment internal components, and electrical applications where thin-wall FR, modulus retention, and high heat resistance are required . This product does not contain PFAS intentionally added during the manufacturing process .
For more NORYL grades and technical information, please visit our PPO/PPE product page.
Key Features of NORYL NHP9023 Resin
-
15% Glass Fiber Reinforced – Provides enhanced stiffness, strength, and dimensional stability for structural applications
-
Halogen-Free Flame Retardant – Non-brominated, non-chlorinated flame retardant system
-
UL94 V-0 & V-1 Rated – V-0 at 1.5mm; V-1 at 0.75mm for thin-wall molding capability
-
High Heat Resistance – HDT of 153°C at 1.82 MPa (6.4mm, unannealed)
-
Strong Electrical Performance – CTI PLC 3 rating; excellent electrical insulating properties
-
Good Dimensional Stability – Mold shrinkage of 0.5% (flow, 3.2mm)
-
Very Low Specific Gravity – Lightweight for various applications
-
High Stiffness/Strength – Tensile modulus of 5,400–5,600 MPa; tensile strength of 112 MPa
-
Hydrolytic Stability – Resists degradation in wet environments
-
Low Creep Sensitivity – Maintains dimensional integrity under sustained load
-
Low Warpage – Minimizes deformation during processing and use
-
Heat Stabilized & Impact Modified – Enhanced impact resistance and thermal stability
-
Amorphous / Low Shrinkage – Low shrinkage characteristics
-
Good Processability – Optimized for injection molding
-
No PFAS Intentionally Added – Compliant with environmental regulations
-
Colorable – All colors are customizable via SABIC‘s ColorXpress tool
Typical Applications for NORYL NHP9023 Resin
| Industry | Typical Components & Considerations |
|---|---|
| Office Equipment | Copier fuser units, business equipment internal components – thin-wall FR, modulus retention, high heat resistance |
| Electrical & Electronics | Electrical applications, fuse boxes, connectors, junction boxes – UL94 V-0/V-1, strong electrical performance |
| Commercial Appliances | Appliance components – flame retardant, dimensional stability |
| Consumer Electronics | Mobile phones, computers, tablets – thin-wall molding, low warpage |
| Building & Construction | Circuit protection, building components – flame retardant, dimensional stability |
| Electric Vehicles | EV battery components, bus bar insulation, battery frames – high heat resistance, flame retardancy |
Typical Properties of NORYL NHP9023 Resin
| Property | Value | Test Method |
|---|---|---|
| Physical | ||
| Specific Gravity | Refer to full TDS | ASTM D792 |
| Density | Refer to full TDS | ISO 1183 |
| Mold Shrinkage, Flow (3.2mm) | 0.5% | SABIC Method |
| Melt Flow Rate (MFR) (300°C/5.0kg) | 20 g/10min | ASTM D1238 |
| Mechanical (ASTM) | ||
| Tensile Modulus (5 mm/min) | 5,400 MPa | ASTM D638 |
| Tensile Strength, Break (5 mm/min) | 112 MPa | ASTM D638 |
| Tensile Strain, Break (5 mm/min) | 2.9% | ASTM D638 |
| Flexural Modulus (1.3 mm/min, 50 mm span) | 5,200 MPa | ASTM D790 |
| Hardness, Rockwell R | 121 | ASTM D785 |
| Izod Impact, Notched (23°C, 1/8 in) | 72 J/m | ASTM D256 |
| Izod Impact, Notched (-30°C, 1/8 in) | 61 J/m | ASTM D256 |
| Izod Impact, Unnotched (23°C) | 500 J/m | ASTM D4812 |
| Izod Impact, Unnotched (-30°C) | 500 J/m | ASTM D4812 |
| Mechanical (ISO) | ||
| Tensile Modulus (1 mm/min) | 5,600 MPa | ISO 527 |
| Tensile Stress, Break (5 mm/min) | 112 MPa | ISO 527 |
| Tensile Strain, Break (5 mm/min) | 2.7% | ISO 527 |
| Flexural Modulus (2 mm/min) | 5,200 MPa | ISO 178 |
| Flexural Strength (2 mm/min) | Refer to full TDS | ISO 178 |
| Izod Notched Impact (23°C, 4mm) | 7 kJ/m² | ISO 180/1A |
| Izod Notched Impact (-30°C, 4mm) | 6 kJ/m² | ISO 180/1A |
| Izod Unnotched Impact (23°C, 4mm) | 28 kJ/m² | ISO 180/1U |
| Charpy Notched Impact (23°C) | 7 kJ/m² | ISO 179/1eA |
| Thermal | ||
| HDT, 1.82 MPa (6.4mm, unannealed) | 153°C | ASTM D648 |
| Vicat Softening Temperature (Rate B/50) | 161°C | ISO 306 |
| Vicat Softening Temperature (Rate B/120) | 163°C | ISO 306 |
| CTE, Flow (-40°C to 40°C) | 3.8E-05 1/°C | ISO 11359-2 |
| UL RTI Electrical | 65°C | UL 746B |
| UL RTI Mechanical with Impact | 65°C | UL 746B |
| UL RTI Mechanical without Impact | 65°C | UL 746B |
| Electrical | ||
| Comparative Tracking Index (CTI) {PLC} | 3 | UL 746A |
| Flammability | ||
| Flame Rating (1.5mm) | V-0 | UL 94 |
| Flame Rating (0.75mm) | V-1 | UL 94 |
| UL Yellow Card | E207780-102131113 | UL |
Important Notes on Typical Data:
Values listed are typical and sourced from manufacturer data sheets. They do not constitute binding product specification.
Batch-to-batch deviations may exist. For critical applications, validate performance with batch-specific COA certificate.
Final performance depends on processing conditions and part design.
Manufacturer official TDS shall serve as definitive technical reference. Request the latest official TDS from our sales team.
Processing Guidelines for NORYL NHP9023 Resin
| Step | Process |
|---|---|
| Processing Method | Injection molding |
| Drying | Refer to full TDS for specific drying conditions |
| Rear – Zone 1 Temperature | Refer to full TDS |
| Middle – Zone 2 Temperature | 275 – 320°C |
| Front – Zone 3 Temperature | 290 – 325°C |
| Nozzle Temperature | Refer to full TDS |
| Melt Temperature | Refer to full TDS |
| Mold Temperature | Refer to full TDS |
| Back Pressure | 0.3 – 0.7 MPa |
| Screw Speed | Refer to full TDS |
| Storage | Store in original, sealed packaging in a cool, dry place away from direct sunlight |
Critical Processing Warnings:
Injection Molding: NORYL NHP9023 is specifically designed for injection molding .
Drying: Proper drying is critical to prevent hydrolysis and achieve optimal mechanical properties.
Glass Reinforcement: This grade contains 15% glass fiber, which may require processing adjustments for optimal surface finish and fiber orientation.
UL Compliance: This grade carries UL94 V-0 (1.5mm) and V-1 (0.75mm) ratings. Ensure processing conditions maintain compliance.
Thin-Wall FR Performance: This grade is specifically formulated for thin-wall flame retardant applications. Verify wall thickness requirements for UL94 compliance.
Storage: Store in original, sealed packaging in a cool, dry place away from direct sunlight.
Related Products
Explore Engineering Plastics – Browse all engineering plastic materials
About Our Company – Learn more about our supply capabilities and quality assurance
Technical Documents for NORYL NHP9023 Resin
| Document Type | Description & Source |
|---|---|
| Manufacturer Official TDS | Complete physical, thermal, and mechanical properties of NORYL NHP9023 |
| Manufacturer Official SDS | GHS-compliant safety documentation |
| COA (Certificate of Analysis) | Batch-specific quality certification |
| UL Yellow Card | E207780-102131113 – UL safety certification |
Request any document above by:
Email: ruiqingchem@gmail.com
Online form: Our contact page
We reply within one working business day. Please clearly state product (NORYL NHP9023) and document type you require.
FAQ about NORYL NHP9023 Resin
Q1: What is NORYL NHP9023?
A: NORYL NHP9023 is a 15% glass fiber reinforced blend of polyphenylene ether (PPE) and high impact polystyrene (HIPS) from SABIC . It is a heat stabilized and impact modified, injection moldable grade with non-halogenated flame retardancy, UL94 V-0 and V-1 ratings, high heat resistance, strong electrical performance, and very low specific gravity .
Q2: What are the key features of NORYL NHP9023?
A: It offers 15% glass reinforcement, halogen-free flame retardancy (UL94 V-0 at 1.5mm & V-1 at 0.75mm), high heat resistance (HDT 153°C), strong electrical performance (CTI PLC 3), good dimensional stability (shrinkage 0.5%), high stiffness (tensile modulus up to 5,600 MPa), high strength (112 MPa tensile), very low specific gravity, hydrolytic stability, low creep sensitivity, good stiffness, low warpage, good processability, and No PFAS intentionally added .
Q3: What are the typical applications for NORYL NHP9023?
A: Typical applications include copier fuser units, business equipment internal components, electrical applications, fuse boxes, connectors, junction boxes, commercial appliances, mobile phones, computers, tablets, circuit protection, and EV battery components .
Q4: What are the flame ratings of NORYL NHP9023?
A: UL94 V-0 at 1.5mm thickness and V-1 at 0.75mm thickness for thin-wall molding capability .
Q5: Is NORYL NHP9023 halogen-free?
A: Yes, it contains non-brominated, non-chlorinated & non-halogenated flame retardant .
Q6: What is the CTI rating of NORYL NHP9023?
A: The Comparative Tracking Index (CTI) is PLC 3 .
Q7: What is the recommended processing method for NORYL NHP9023?
A: NORYL NHP9023 is designed for injection molding .
Q8: What is the recommended front zone temperature for NORYL NHP9023?
A: 290 – 325°C .
Q9: What is the recommended back pressure for NORYL NHP9023?
A: 0.3 – 0.7 MPa .
Q10: What is the UL Yellow Card number for NORYL NHP9023?
A: E207780-102131113 .
Q11: Does NORYL NHP9023 contain PFAS?
A: No, this product does not contain PFAS intentionally added during the manufacturing process .
Q12: What regions is NORYL NHP9023 available in?
A: Asia / Pacific, Europe, and Americas .
Q13: What is the lead time for orders?
A: Regular orders ship within 7-10 working days after payment confirmation. Large-volume orders can be negotiated separately.
CTA (Call to Action)
Ready to order NORYL NHP9023?
To get a precise quotation and professional technical support, please share:
-
Required quantity (kg)
-
Destination port or delivery address
-
Target application (copier fuser units, business equipment, electrical components, etc.)
-
Document requirement (TDS, SDS, COA, UL docs, etc.)
Sample Policy:
-
Samples are for laboratory validation tests only, not for production use.
-
Buyer bears international sample-shipping freight.
-
If bulk-product performance deviates from sample reference, manufacturer official TDS serves as the authoritative benchmark.
Take action now:
-
📧 Email Us – ruiqingchem@gmail.com
-
📝 Send Inquiry – Use our quick inquiry form
-
💬 Live Chat – Click the bottom-right chat widget to speak directly with our team
After-Sales Support
| Service | Details |
|---|---|
| Quality Inspection Period | All quality-related claims must be submitted within 7 working days after delivery, supported by test data and photographic evidence. |
| Return / Exchange Policy | Confirmed product defects caused by our side trigger replacement or refund. Terms and conditions apply. |
| Logistics Damage | Report shipping damage directly to carrier immediately upon goods receipt. We assist with claim-document preparation. |
| Technical Support | Remote technical guidance available. On-site troubleshooting can be arranged upon special request. |
| Export Documentation | We supply commercial invoice, packing list, bill of lading, COA, and additional compliance certificates on request. |
Disclaimer
DISCLAIMER: All technical data is referenced from original manufacturer typical values for NORYL NHP9023. Our company acts as authorized distributor/trader rather than original manufacturer. Final performance depends on processing conditions and part design. Buyers shall independently validate product suitability for individual applications. Our firm bears no liability for product failure caused by improper processing or improper usage. Always reference the latest manufacturer official TDS of NORYL NHP9023 as the definitive specification.
