描述
NORYL NHP6034T3 Resin is a 20% glass fiber reinforced blend of polyphenylene ether (PPE) and polystyrene (PS), manufactured by SABIC. This injection moldable grade contains non-brominated, non-chlorinated flame retardant and carries a UL94 flame rating of V-0 at 0.3mm for ultra-thin wall molding capability.
NORYL NHP6034T3 is based on a unique co-polymer technology and exhibits good dimensional stability, high heat resistance, strong electrical performance and very low specific gravity. The material delivers excellent electrical insulating properties with a dielectric constant of 2.5 and dissipation factor of 0.0002 at 1 MHz. Its glass transition temperature is 211°C, with a melting point of 268°C. NHP6034T3 also does not contain PFAS intentionally added during the manufacturing process. Target applications are Electric Vehicle (EV) battery internal parts and electric components.
For more NORYL grades and technical information, please visit our PPO/PPE product page.
Key Features of NORYL NHP6034T3 Resin
-
20% Glass Fiber Reinforced – Provides enhanced stiffness, strength, and dimensional stability
-
UL94 V-0 at 0.3mm – Achieves V-0 flame rating at 0.3mm thickness for ultra-thin wall molding capability
-
Ultra-Thin Wall FR Capability – Enables molding of extremely thin-walled components with V-0 flame retardancy
-
High Heat Resistance – HDT exceeding 150°C; long-term use temperature of 120–130°C; Tg of 211°C and melting point of 268°C
-
Strong Electrical Performance – Dielectric constant of 2.5 and dissipation factor of 0.0002 at 1 MHz; excellent insulating properties
-
Good Dimensional Stability – Maintains precise part geometry under thermal and mechanical stress
-
Very Low Specific Gravity – Density of 1.15–1.35 g/cm³ for lightweight EV battery components
-
Halogen-Free Flame Retardant – Non-brominated, non-chlorinated flame retardant system
-
Unique Co-Polymer Technology – Based on advanced SABIC polymer technology for enhanced performance
-
No PFAS Intentionally Added – Compliant with environmental regulations
-
Injection Moldable – Suitable for standard injection molding processes
-
RoHS Compliant – Meets global environmental standards
Typical Applications for NORYL NHP6034T3 Resin
| Industry | Typical Components & Considerations |
|---|---|
| Electric Vehicles | EV battery internal parts – UL94 V-0 at 0.3mm, thin-wall FR, high heat resistance |
| Electric Vehicles | EV battery cell frames, retainers, top covers – ultra-thin wall design, dimensional stability |
| Electrical & Electronics | Thin-wall electrical components – UL94 V-0, strong electrical performance |
| Electrical & Electronics | Electronic components requiring high CTI and FR performance |
| Automotive | Underhood components – high heat resistance, dimensional stability |
Typical Properties of NORYL NHP6034T3 Resin
Note: Some values are based on published data and may require confirmation from the official TDS.
| Property | Value | Test Method |
|---|---|---|
| Physical | ||
| Density / Specific Gravity | 1.15 – 1.35 g/cm³ | ASTM D792 |
| Filler / Reinforcement | 20% Glass Fiber | SABIC Method |
| Glass Transition Temperature (Tg) | 211°C | DSC |
| Melting Point | 268°C | DSC |
| Long-Term Use Temperature | 120 – 130°C | SABIC Method |
| Water Absorption (23°C/50% RH) | Refer to full TDS | ASTM D570 |
| Mechanical | ||
| Tensile Modulus | Refer to full TDS | ASTM D638 |
| Tensile Strength at Break | Refer to full TDS | ASTM D638 |
| Tensile Strain at Break | Refer to full TDS | ASTM D638 |
| Flexural Modulus | Refer to full TDS | ASTM D790 |
| Flexural Strength | Refer to full TDS | ASTM D790 |
| Impact | ||
| Notched Izod Impact (23°C) | Refer to full TDS | ASTM D256 |
| Unnotched Izod Impact (23°C) | Refer to full TDS | ASTM D256 |
| Thermal | ||
| HDT, 1.82 MPa (3.2mm) | > 150°C | ASTM D648 |
| HDT, 0.45 MPa (3.2mm) | Refer to full TDS | ASTM D648 |
| Vicat Softening Temperature | Refer to full TDS | ASTM D1525 |
| Electrical | ||
| Dielectric Constant (1 MHz) | 2.5 | ASTM D150 |
| Dissipation Factor (1 MHz) | 0.0002 | ASTM D150 |
| Surface Resistivity | Refer to full TDS | ASTM D257 |
| Volume Resistivity | Refer to full TDS | ASTM D257 |
| Flammability | ||
| Flame Rating (0.3mm) | V-0 | UL 94 |
| UL Yellow Card | E207780 | UL |
Important Notes on Typical Data:
Values listed are typical and sourced from manufacturer data sheets. They do not constitute binding product specification.
Batch-to-batch deviations may exist. For critical applications, validate performance with batch-specific COA certificate.
Final performance depends on processing conditions and part design.
Manufacturer official TDS shall serve as definitive technical reference. Request the latest official TDS from our sales team.
Processing Guidelines for NORYL NHP6034T3 Resin
| Step | Process |
|---|---|
| Processing Method | Injection molding |
| Drying Temperature | Refer to full TDS |
| Drying Time | Refer to full TDS |
| Rear – Zone 1 Temperature | Refer to full TDS |
| Middle – Zone 2 Temperature | Refer to full TDS |
| Front – Zone 3 Temperature | Refer to full TDS |
| Nozzle Temperature | Refer to full TDS |
| Melt Temperature | Refer to full TDS |
| Mold Temperature | Refer to full TDS |
| Screw Speed | Refer to full TDS |
| Storage | Store in original, sealed packaging in a cool, dry place away from direct sunlight |
Critical Processing Warnings:
Injection Molding: NORYL NHP6034T3 is specifically designed for injection molding.
Drying: Proper drying is critical to prevent hydrolysis and achieve optimal mechanical properties.
Glass Reinforcement: This grade contains 20% glass fiber, which may require processing adjustments for optimal surface finish and fiber orientation.
UL Compliance: This grade carries a UL94 V-0 rating at 0.3mm thickness for ultra-thin wall molding capability. Ensure processing conditions maintain compliance.
Ultra-Thin Wall FR Performance: This grade is specifically formulated for ultra-thin wall flame retardant applications. Verify wall thickness requirements for UL94 V-0 compliance.
Storage: Store in original, sealed packaging in a cool, dry place away from direct sunlight.
Related Products
Explore Engineering Plastics – Browse all engineering plastic materials
About Our Company – Learn more about our supply capabilities and quality assurance
Technical Documents for NORYL NHP6034T3 Resin
| Document Type | Description & Source |
|---|---|
| Manufacturer Official TDS | Complete physical, thermal, and mechanical properties of NORYL NHP6034T3 |
| Manufacturer Official SDS | GHS-compliant safety documentation |
| COA (Certificate of Analysis) | Batch-specific quality certification |
| UL Yellow Card | E207780 – UL safety certification |
Request any document above by:
Email: ruiqingchem@gmail.com
Online form: Our contact page
We reply within one working business day. Please clearly state product (NORYL NHP6034T3) and document type you require.
FAQ about NORYL NHP6034T3 Resin
Q1: What is NORYL NHP6034T3?
A: NORYL NHP6034T3 is a 20% glass fiber reinforced blend of polyphenylene ether (PPE) and polystyrene (PS) from SABIC. It is an injection moldable grade with non-halogenated flame retardancy, UL94 V-0 rating at 0.3mm for ultra-thin wall molding capability, high heat resistance, good dimensional stability, strong electrical performance, and very low specific gravity.
Q2: What does the “T3” designation in NORYL NHP6034T3 indicate?
A: The “T3” designation likely indicates a specific regional or formulation variant within the NORYL NHP6000 series. The “T3” variant is distinguished by its UL94 V-0 flame rating at 0.3mm thickness, enabling ultra-thin wall molding capability.
Q3: What are the key features of NORYL NHP6034T3?
A: It offers 20% glass reinforcement, halogen-free flame retardancy (UL94 V-0 at 0.3mm), ultra-thin wall FR capability, high heat resistance (HDT >150°C), strong electrical performance (dielectric constant 2.5 at 1 MHz), good dimensional stability, very low specific gravity (1.15–1.35 g/cm³), and No PFAS intentionally added.
Q4: What are the typical applications for NORYL NHP6034T3?
A: Typical applications include Electric Vehicle (EV) battery internal parts, EV battery cell frames, retainers, top covers, thin-wall electrical components, and electronic components requiring high CTI and FR performance.
Q5: What is the flame rating of NORYL NHP6034T3?
A: UL94 V-0 at 0.3mm thickness for ultra-thin wall molding capability.
Q6: Is NORYL NHP6034T3 halogen-free?
A: Yes, it contains non-brominated, non-chlorinated flame retardant.
Q7: What is the recommended processing method for NORYL NHP6034T3?
A: NORYL NHP6034T3 is designed for injection molding.
Q8: What is the UL Yellow Card number for NORYL NHP6034T3?
A: E207780
Q9: Does NORYL NHP6034T3 contain PFAS?
A: No, this product does not contain PFAS intentionally added during the manufacturing process.
Q10: What is the glass transition temperature of NORYL NHP6034T3?
A: The glass transition temperature (Tg) is 211°C
Q11: What regions is NORYL NHP6034T3 available in?
A: Africa & Middle East, Asia Pacific, Europe, Latin America, and North America.
Q12: What is the lead time for orders?
A: Regular orders ship within 7-10 working days after payment confirmation. Large-volume orders can be negotiated separately.
CTA (Call to Action)
Ready to order NORYL NHP6034T3?
To get a precise quotation and professional technical support, please share:
-
Required quantity (kg)
-
Destination port or delivery address
-
Target application (EV battery internal parts, thin-wall electrical components, etc.)
-
Document requirement (TDS, SDS, COA, UL docs, etc.)
Sample Policy:
-
Samples are for laboratory validation tests only, not for production use.
-
Buyer bears international sample-shipping freight.
-
If bulk-product performance deviates from sample reference, manufacturer official TDS serves as the authoritative benchmark.
Take action now:
-
📧 Email Us – ruiqingchem@gmail.com
-
📝 Send Inquiry – Use our quick inquiry form
-
💬 Live Chat – Click the bottom-right chat widget to speak directly with our team
After-Sales Support
| Service | Details |
|---|---|
| Quality Inspection Period | All quality-related claims must be submitted within 7 working days after delivery, supported by test data and photographic evidence. |
| Return / Exchange Policy | Confirmed product defects caused by our side trigger replacement or refund. Terms and conditions apply. |
| Logistics Damage | Report shipping damage directly to carrier immediately upon goods receipt. We assist with claim-document preparation. |
| Technical Support | Remote technical guidance available. On-site troubleshooting can be arranged upon special request. |
| Export Documentation | We supply commercial invoice, packing list, bill of lading, COA, and additional compliance certificates on request. |
Disclaimer
DISCLAIMER: All technical data is referenced from original manufacturer typical values for NORYL NHP6034T3. Our company acts as authorized distributor/trader rather than original manufacturer. Final performance depends on processing conditions and part design. Buyers shall independently validate product suitability for individual applications. Our firm bears no liability for product failure caused by improper processing or improper usage. Always reference the latest manufacturer official TDS of NORYL NHP6034T3 as the definitive specification.
