描述
NORYL NH5110E Resin is a non-reinforced, heat stabilized & impact modified blend of polyphenylene ether (PPE) and high impact polystyrene (HIPS), manufactured by SABIC. This extrusion grade contains non-brominated, non-chlorinated & non-halogenated flame retardant and carries a UL94 flame rating of V-1 at 1.5mm.
NORYL NH5110E Resin was specifically developed for low beard-growth during profile extrusion and exhibits low creep sensitivity. It also offers good dimensional stability with low moisture absorption (0.06% at 23°C/50% RH). This material is an excellent candidate for electrical conduit and cable management applications. Physical property data is determined using test methods established by ISO, the globally recognized standards organization.
For more NORYL grades and technical information, please visit our PPO/PPE product page.
Key Features of NORYL NH5110E Resin
-
Halogen-Free Flame Retardant – Non-brominated, non-chlorinated flame retardant system
-
UL94 V-1 Rated – V-1 at 1.5mm thickness
-
Low Beard-Growth – Specifically developed for low beard-growth during profile extrusion
-
Low Creep Sensitivity – Maintains dimensional integrity under sustained load
-
Heat Stabilized – Maintains properties under thermal exposure
-
Impact Modified – Enhanced impact resistance for demanding applications
-
Good Dimensional Stability – Precise part geometry with low warpage
-
Low Moisture Absorption – 0.06% moisture absorption at 23°C/50% RH
-
Good Mechanical Strength – Tensile strength of 64 MPa (yield) / 52 MPa (break)
-
Good Stiffness – Flexural modulus of 2,400 MPa
-
Excellent Processability – Specifically designed for profile extrusion
-
Non-Reinforced PPE/HIPS Blend – Unfilled formulation for balanced performance
-
RoHS Compliant – Meets global environmental standards
Typical Applications for NORYL NH5110E Resin
| Industry | Typical Components & Considerations |
|---|---|
| Electrical & Electronics | Electrical conduit – UL94 V-1, halogen-free flame retardant, low beard-growth |
| Electrical & Electronics | Cable management systems – low beard-growth, dimensional stability |
| Building & Construction | Building profiles – flame retardant, dimensional stability |
| Wiring & Cables | Wiring and cable applications – UL94 V-1, halogen-free |
Typical Properties of NORYL NH5110E Resin
| Property | Value | Test Method |
|---|---|---|
| Physical | ||
| Density | 1.09 g/cm³ (1090 kg/m³) | ISO 1183 |
| Water Absorption (Saturated, 23°C) | 0.15% | ISO 62-1 |
| Moisture Absorption (23°C/50% RH) | 0.06% | ISO 62 |
| Melt Volume Rate (MVR, 280°C/5.0kg) | 9 cm³/10min | ISO 1133 |
| Mechanical (ISO) | ||
| Tensile Modulus (1 mm/min) | 2,500 MPa | ISO 527 |
| Tensile Stress, Yield (50 mm/min) | 64 MPa | ISO 527 |
| Tensile Stress, Break (50 mm/min) | 52 MPa | ISO 527 |
| Tensile Strain, Yield (50 mm/min) | 4% | ISO 527 |
| Tensile Strain, Break (50 mm/min) | 18% | ISO 527 |
| Flexural Modulus (2 mm/min) | 2,400 MPa | ISO 178 |
| Flexural Stress, Yield (2 mm/min) | 98 MPa | ISO 178 |
| Impact | ||
| Izod Notched Impact (23°C, 4mm) | 24 kJ/m² | ISO 180/1A |
| Izod Notched Impact (-30°C, 4mm) | 9 kJ/m² | ISO 180/1A |
| Charpy Notched Impact (23°C) | 26 kJ/m² | ISO 179/1eA |
| Charpy Notched Impact (-30°C) | 11 kJ/m² | ISO 179/1eA |
| Thermal | ||
| HDT/Af (1.8 MPa) | 114°C | ISO 75/Af |
| HDT/Be (0.45 MPa) | 129°C | ISO 75/Be |
| Vicat Softening Temperature (B/50) | 149°C | ISO 306 |
| Vicat Softening Temperature (B/120) | 138°C | ISO 306 |
| CTE, Flow (23°C to 80°C) | 8.2E-05 1/°C | ASTM E831 / ISO 11359-2 |
| CTE, X-Flow (23°C to 80°C) | 9.4E-05 1/°C | ASTM E831 / ISO 11359-2 |
| Ball Pressure Test (123°C to 127°C) | Pass | IEC 60695-10-2 |
| RTI Electrical | 65°C | UL 746B |
| RTI Mechanical with Impact | 65°C | UL 746B |
| Flammability | ||
| Flame Rating (1.5mm) | V-1 | UL 94 |
| UL Yellow Card | E45329 | UL |
Important Notes on Typical Data:
Values listed are typical and sourced from manufacturer data sheets. They do not constitute binding product specification.
Batch-to-batch deviations may exist. For critical applications, validate performance with batch-specific COA certificate.
Final performance depends on processing conditions and part design.
Manufacturer official TDS shall serve as definitive technical reference. Request the latest official TDS from our sales team.
Processing Guidelines for NORYL NH5110E Resin
| Step | Process |
|---|---|
| Processing Method | Profile Extrusion |
| Drying Time | 2 – 3 hours |
| Adapter Temperature | 240 – 260°C |
| Barrel Zone 2 Temperature | 230 – 250°C |
| Melt Temperature | Refer to full TDS |
| Storage | Store in original, sealed packaging in a cool, dry place away from direct sunlight |
Critical Processing Warnings:
Profile Extrusion: NORYL NH5110E is specifically designed for profile extrusion.
Drying: Proper drying is critical to prevent hydrolysis and achieve optimal mechanical properties. Dry for 2–3 hours.
Low Beard-Growth: This grade is specifically formulated for low beard-growth during profile extrusion. Verify processing parameters for optimal surface quality.
UL Compliance: This grade carries a UL94 V-1 rating at 1.5mm thickness. Ensure processing conditions maintain compliance.
Storage: Store in original, sealed packaging in a cool, dry place away from direct sunlight.
Related Products
Explore Engineering Plastics – Browse all engineering plastic materials
About Our Company – Learn more about our supply capabilities and quality assurance
Technical Documents for NORYL NH5110E Resin
| Document Type | Description & Source |
|---|---|
| Manufacturer Official TDS | Complete physical, thermal, and mechanical properties of NORYL NH5110E |
| Manufacturer Official SDS | GHS-compliant safety documentation |
| COA (Certificate of Analysis) | Batch-specific quality certification |
| UL Yellow Card | E45329 – UL safety certification |
Request any document above by:
Email: ruiqingchem@gmail.com
Online form: Our contact page
We reply within one working business day. Please clearly state product (NORYL NH5110E) and document type you require.
FAQ about NORYL NH5110E Resin
Q1: What is NORYL NH5110E?
A: NORYL NH5110E is a non-reinforced, heat stabilized & impact modified blend of polyphenylene ether (PPE) and high impact polystyrene (HIPS) from SABIC. It is an extrusion grade with non-halogenated flame retardancy, UL94 V-1 rating, and is specifically developed for low beard-growth during profile extrusion.
Q2: What are the key features of NORYL NH5110E?
A: It offers halogen-free flame retardancy (UL94 V-1 at 1.5mm), low beard-growth during profile extrusion, low creep sensitivity, heat stabilization, impact modification, good dimensional stability, low moisture absorption (0.06%), and good mechanical strength (64 MPa yield / 52 MPa break).
Q3: What are the typical applications for NORYL NH5110E?
A: Typical applications include electrical conduit, cable management systems, building profiles, and wiring and cable applications.
Q4: What is the flame rating of NORYL NH5110E?
A: UL94 V-1 at 1.5mm thickness.
Q5: Is NORYL NH5110E halogen-free?
A: Yes, it contains non-brominated, non-chlorinated & non-halogenated flame retardant.
Q6: What is the recommended processing method for NORYL NH5110E?
A: NORYL NH5110E is designed for profile extrusion.
Q7: What is the recommended drying condition for NORYL NH5110E?
A: Dry for 2 – 3 hours prior to processing.
Q8: What is the density of NORYL NH5110E?
A: The density is 1.09 g/cm³ (1090 kg/m³).
Q9: What is the UL Yellow Card number for NORYL NH5110E?
A: E45329.
Q10: What regions is NORYL NH5110E available in?
A: Central and Eastern Europe, Western Europe.
Q11: What is the lead time for orders?
A: Regular orders ship within 7-10 working days after payment confirmation. Large-volume orders can be negotiated separately.
CTA (Call to Action)
Ready to order NORYL NH5110E?
To get a precise quotation and professional technical support, please share:
-
Required quantity (kg)
-
Destination port or delivery address
-
Target application (electrical conduit, cable management, etc.)
-
Document requirement (TDS, SDS, COA, UL docs, etc.)
Sample Policy:
-
Samples are for laboratory validation tests only, not for production use.
-
Buyer bears international sample-shipping freight.
-
If bulk-product performance deviates from sample reference, manufacturer official TDS serves as the authoritative benchmark.
Take action now:
-
📧 Email Us – ruiqingchem@gmail.com
-
📝 Send Inquiry – Use our quick inquiry form
-
💬 Live Chat – Click the bottom-right chat widget to speak directly with our team
After-Sales Support
| Service | Details |
|---|---|
| Quality Inspection Period | All quality-related claims must be submitted within 7 working days after delivery, supported by test data and photographic evidence. |
| Return / Exchange Policy | Confirmed product defects caused by our side trigger replacement or refund. Terms and conditions apply. |
| Logistics Damage | Report shipping damage directly to carrier immediately upon goods receipt. We assist with claim-document preparation. |
| Technical Support | Remote technical guidance available. On-site troubleshooting can be arranged upon special request. |
| Export Documentation | We supply commercial invoice, packing list, bill of lading, COA, and additional compliance certificates on request. |
Disclaimer
DISCLAIMER: All technical data is referenced from original manufacturer typical values for NORYL NH5110E. Our company acts as authorized distributor/trader rather than original manufacturer. Final performance depends on processing conditions and part design. Buyers shall independently validate product suitability for individual applications. Our firm bears no liability for product failure caused by improper processing or improper usage. Always reference the latest manufacturer official TDS of NORYL NH5110E as the definitive specification.
