描述
Krytox XHT-AC Grease is an extreme high-temperature PFPE (perfluoropolyether) grease from Chemours’ Krytox performance lubricants portfolio, genuinely manufactured by Chemours and imported as original product. As an authorized distributor and trader, we supply genuine material with full traceability and direct access to official Chemours technical documentation. For more product options and company information, please visit our website at https://szrqchem.com/.
Krytox XHT-AC Grease is a special high-temperature grease with low oil evaporation that provides anti-wear and rusting protection and is compatible with all elastomers and plastics. The base oil is an extremely viscous PFPE oil (500 cSt at 40°C) that provides good viscosity retention and lower evaporation at high temperatures. PTFE is the standard thickener, and the grease is made to a standard NLGI Grade 2.
The grease has excellent lubrication over a broad temperature range but is designed to work best at temperatures over 200°C (400°F). While most petroleum-based products degrade below 99°C (210°F), Krytox XHT-AC Grease operates continuously from -20°C to 300°C (-4°F to 572°F), with PTFE thickener stability up to 320°C (608°F). The grease is nonflammable, oxygen-compatible, and chemically inert.
Krytox XHT-AC Grease is NSF H-1 registered for incidental food contact, making it suitable for applications where food contact is unavoidable.
Key Features of Krytox XHT-AC Grease
-
NSF H-1 Registered – Approved for incidental food contact in applications where contact is unavoidable
-
Extreme High-Temperature Performance – Continuous operation from -20°C to 300°C (-4°F to 572°F), designed for best performance above 200°C (400°F)
-
Low Oil Evaporation – Maximum volatility of <1% after 22 hours at 204°C (400°F), minimizing lubricant loss and extending performance in extreme heat
-
Anti-Wear & Rust Protection – Formulated with sodium nitrite additives for enhanced corrosion and anti-wear protection
-
Nonflammable & Oxygen-Compatible – Contains no hydrogen; will not burn or support combustion, even in pure oxygen environments
-
Chemically Inert – Resistant to oxygen and virtually all chemicals; no adverse effect on metals when operating below 288°C (550°F)
-
Excellent Material Compatibility – Compatible with all elastomers and plastics
-
Extended Lubrication Intervals – Provides longer equipment life and reduced maintenance frequency
-
High Viscosity Base Oil – 500 cSt at 40°C provides good viscosity retention at high temperatures
Typical Applications for Krytox XHT-AC Grease
| Industry | Typical Components & Considerations |
|---|---|
| Bearings | Paint plant conveyor bearings; corrugator and paper machine bearings; aluminum can manufacturing bearings; textile calender roll bearings; brick kiln car bearings; ventilation fan bearings |
| High-Temperature Ovens & Furnaces | High-temperature fans; conveyor systems in glass and aluminum plants; high-temperature ovens; tenter frames |
| Welding Equipment | Welding machines |
| Textile Equipment | Textile equipment, dryer cans, process rolls |
| Valves & Seals | Valve lubrication |
| Rod Mills | Rod mill applications |
| General Industrial | Critical applications where temperatures reach extremes that conventional lubricants cannot handle |
Material Advantages
Krytox XHT-AC Grease is a high-performance PFPE grease that delivers:
-
NSF H-1 Food Contact Approval – Registered for incidental food contact, making it suitable for food processing and packaging applications where conventional lubricants cannot be used
-
Unmatched High-Temperature Capability – Continuous operation up to 300°C (572°F) with best performance above 200°C (400°F), far exceeding the capabilities of conventional greases
-
Lowest Evaporation in Its Class – Volatility of <1% after 22 hours at 204°C (400°F) – the lowest in the XHT series, minimizing lubricant loss and extending performance in extreme heat
-
Enhanced Corrosion Protection – Contains sodium nitrite additives for superior anti-corrosion performance
-
Non-Melting Stability – PTFE thickener maintains grease consistency up to 320°C (608°F)
-
Inherent Safety – Nonflammable and chemically inert, making it safe for use in oxygen-rich, chemical, and extreme thermal environments
-
Extended Service Life – Low evaporation (<1% at 204°C) and high thermal stability reduce the need for frequent relubrication, lowering maintenance costs and downtime
-
Excellent Material Compatibility – Compatible with all elastomers and plastics; no adverse effect on metals below 288°C (550°F)
-
High Viscosity Retention – The 500 cSt base oil provides good viscosity at elevated temperatures, ensuring reliable lubrication where lower-viscosity oils would fail
Chemours, as the inventor of Krytox, brings decades of PFPE lubricant expertise, ensuring batch-to-batch consistency, reliable supply, and full technical support.
Typical Properties
| Property | Krytox XHT-AC Grease | Unit / Remarks |
|---|---|---|
| Product Type | PFPE Extreme High-Temperature Grease | – |
| Color | White, creamy consistency | – |
| NLGI Grade | 2 | – |
| Base Chemistry | Perfluoropolyether (PFPE) | – |
| Thickener | PTFE | – |
| Base Oil Viscosity @ 20°C | 1,712 cSt | – |
| Base Oil Viscosity @ 40°C | 500 cSt | – |
| Base Oil Viscosity @ 100°C | 47 cSt | – |
| Oil Viscosity Index | 149 | – |
| Oil Pour Point | -25°C (-13°F) | – |
| Specific Gravity @ 0°C | 1.99 | – |
| Antirust Rating (ASTM D-1743) | Pass | – |
| Continuous Service Temp. | -20°C to 300°C (-4°F to 572°F) | – |
| PTFE Thickener Stability | Up to 320°C (608°F) | – |
| Max Volatility (22 hrs @ 204°C) | <1% | – |
| Food Contact Approval | NSF H-1 | – |
| Chemical Behavior | Nonflammable, chemically inert, oxygen-compatible | – |
| Packaging | 57 g syringe; 0.5 kg, 1 kg jars; 5 kg, 20 kg pails | – |
| Country of Origin | USA | – |
Important Notes on Typical Data:
-
Values listed are typical and sourced from Chemours official data sheets. They do not constitute binding product specification.
-
Batch-to-batch deviations may exist. For critical applications, validate performance with batch-specific COA certificate.
-
Final performance depends on application conditions, operating environment, and relubrication intervals.
-
Chemours official TDS shall serve as definitive technical reference. Request the latest official TDS from our sales team.
XHT-AC Series Comparison
| Property | XHT-AC | XHT-ACX |
|---|---|---|
| Standard NLGI Grade | 2 | 2 |
| Estimated Useful Range | -20°C to 300°C | -10°C to 300°C |
| Base Oil Viscosity @ 40°C | 500 cSt | 738 cSt |
| Base Oil Viscosity @ 100°C | 47 cSt | 65 cSt |
| Oil Viscosity Index | 149 | 158 |
| Oil Pour Point | -25°C | -15°C |
| Max Volatility (22 hrs @ 204°C) | <1% | <0.75% |
| Antirust Rating (ASTM D-1743) | Pass | Pass |
| NSF H-1 | Yes | Yes |
Processing & Application Guidelines
| Consideration | Details |
|---|---|
| Application | Apply to clean surfaces. Grease should be applied using standard grease application equipment (grease gun, automatic lubricators, or manual application). Ensure surfaces are free from contaminants before application |
| Temperature Range | Designed for best performance above 200°C (400°F); continuous operation up to 300°C (572°F) |
| Metal Compatibility | Chemically inert with no adverse effect on metals below 288°C (550°F). Above 288°C, many alloy steels, stainless steels, aluminum alloys, titanium alloys, nickel alloys, and cobalt alloys can be used |
| Thickener Stability | Should be used below 320°C (608°F), where the PTFE thickener could begin to melt |
| Storage | Store in original, sealed containers in a cool, dry place away from direct sunlight |
| Shelf Life | Extended shelf life; refer to product packaging for specific expiration date |
Critical Application Warnings:
-
NSF H-1 Registered: Krytox XHT-AC Grease is NSF H-1 registered for incidental food contact, making it suitable for applications where food contact is unavoidable.
-
Temperature Considerations: While the grease can withstand temperatures up to 300°C continuously, the PTFE thickener begins to melt above 320°C (608°F).
-
Surface Preparation: Ensure clean application surfaces to maximize lubricant adhesion and performance.
-
Material Compatibility: Compatible with all elastomers and plastics. However, always verify compatibility with specific materials in your application.
-
Metal Compatibility: No adverse effect on metals below 288°C (550°F). Above this temperature, verify compatibility with specific alloys.
Related Products
-
Explore Krytox XHT Series – Browse all Krytox XHT extreme high-temperature lubricants
-
Explore Krytox Lubricants – Browse all Krytox performance lubricant options
-
About Our Company – Learn more about our supply capabilities and quality assurance
Technical Documents
| Document Type | Description & Source |
|---|---|
| Chemours Official TDS | Complete physical, thermal, and mechanical properties of Krytox XHT-AC Grease, issued by Chemours original |
| Chemours Official SDS | GHS-compliant chemical safety documentation, original Chemours document |
| Chemours Distributor Authorization Certificate | Proof of our authorized-distributor qualification for Chemours Krytox series, available upon request |
| NSF H-1 Registration Certificate | Food contact approval documentation |
| COA (Certificate of Analysis) | Batch-specific quality certification |
Request any document above by:
-
Email:
ruiqingchem@gmail.com -
Online form: Our contact page
We reply within one working business day. Please clearly state product (Krytox XHT-AC Grease) and document type you require.
FAQ
Q1: What is Krytox XHT-AC Grease and what is it used for?
A: Krytox XHT-AC Grease is an extreme high-temperature PFPE grease from Chemours. It is formulated for continuous operation from -20°C to 300°C (-4°F to 572°F) with low oil evaporation (<1% at 204°C) and provides anti-wear and rust protection. It is NSF H-1 registered for incidental food contact and widely used in bearings, high-temperature ovens, textile equipment, welding machines, conveyor systems, and other extreme thermal applications.
Q2: Is Krytox XHT-AC Grease NSF H-1 registered?
A: Yes. Krytox XHT-AC Grease is NSF H-1 registered for incidental food contact.
Q3: What is the NLGI grade of Krytox XHT-AC Grease?
A: Krytox XHT-AC Grease has an NLGI grade of 2.
Q4: What is the base oil viscosity of Krytox XHT-AC Grease?
A: The base oil viscosity is 500 cSt at 40°C and 47 cSt at 100°C.
Q5: Is Krytox XHT-AC Grease flammable?
A: No. Krytox XHT-AC Grease is nonflammable, chemically inert, and oxygen-compatible. It will not burn or support combustion, even in oxygen-rich environments.
Q6: What is the maximum operating temperature of Krytox XHT-AC Grease?
A: Continuous service up to 300°C (572°F), with PTFE thickener stability up to 320°C (608°F).
Q7: What is the volatility of Krytox XHT-AC Grease?
A: The grease has a maximum volatility of <1% after 22 hours at 204°C (400°F), indicating very low oil evaporation even at extreme temperatures.
Q8: What is the difference between XHT-AC and XHT-ACX?
A: XHT-ACX has a higher base oil viscosity (738 cSt vs 500 cSt at 40°C), slightly higher viscosity index (158 vs 149), and lower volatility (<0.75% vs <1%), but a narrower low-temperature range (-10°C vs -20°C).
Q9: Is Krytox XHT-AC Grease compatible with plastics and elastomers?
A: Yes. Krytox XHT-AC Grease is compatible with all elastomers and plastics.
Q10: What packaging options are available for Krytox XHT-AC Grease?
A: Available in 57 g syringe; 0.5 kg and 1 kg jars; as well as 5 kg and 20 kg pails.
Q11: What is the shelf life of Krytox XHT-AC Grease?
A: Krytox XHT-AC Grease has an extended shelf life when stored in unopened, proper conditions. Refer to product packaging for specific expiration dates.
Q12: What is the lead time for orders?
A: Regular orders ship within 7-10 working days after payment confirmation. Large-volume or urgent orders can be negotiated separately.
CTA (Call to Action)
Ready to order Krytox XHT-AC Grease?
To get a precise quotation and professional technical support, please share:
-
Required quantity (kg)
-
Destination port or delivery address
-
Target application (bearings, ovens, textile equipment, welding, etc.)
-
Operating temperature range
-
Packaging preference (syringe, jars, or pails)
-
Document requirement (TDS, SDS, NSF H-1 certificate, COA, etc.)
Sample Policy:
-
Samples are for laboratory validation tests only, not for production use.
-
Buyer bears international sample-shipping freight.
-
If bulk-product performance deviates from sample reference, Chemours official TDS serves as the authoritative benchmark.
Take action now:
-
📧 Email Us –
ruiqingchem@gmail.com -
📝 Send Inquiry – Use our quick inquiry form
-
💬 Live Chat – Click the bottom-right chat widget to speak directly with our team
After-Sales Support
| Service | Details |
|---|---|
| Quality Inspection Period | All quality-related claims must be submitted within 7 working-days after delivery, supported by test data and photographic evidence. |
| Return / Exchange Policy | Confirmed product defects caused by our side trigger replacement or refund. Terms and conditions apply. |
| Logistics Damage | Report shipping damage directly to carrier immediately upon goods receipt. We assist with claim-document preparation. |
| Technical Support | Remote technical guidance available. On-site troubleshooting can be arranged upon special request. |
| Export Documentation | We supply commercial invoice, packing list, bill of lading, COA, and additional compliance certificates (e.g., NSF H-1) on request. |
Disclaimer
DISCLAIMER: All technical data is referenced from original Chemours typical values for Krytox XHT-AC Grease. Our company acts as authorized distributor/trader rather than original manufacturer. Final performance depends on application conditions, operating environment, and maintenance practices. Buyers shall independently validate product suitability for individual applications. Our firm bears no liability for lubricant failure caused by improper application or improper usage. Always reference the latest Chemours official TDS of Krytox XHT-AC Grease as the definitive specification.
