描述
3M Novec 73DE Engineered Fluid Heavy Duty High Solvency Degreasing
Type: Heavy Duty Degreasing Solvent
Boiling Point: 48°C
KB Value: 83
Surface Tension: 19.9 dynes/cm
Packing: 5KG / 20KG drum
3M Novec 73DE Engineered Fluid is a high-performance, heavy-duty vapor degreasing and immersion cleaning solvent designed to replace n-propyl bromide (nPB), trichloroethylene (TCE), ozone-depleting HCFCs, and high-GWP HFCs. With an exceptional Kauri-Butanol (KB) value of 83 — the highest in the Novec series — this nonflammable fluid delivers superior solvency for removing heavy greases, oils, waxes, silicones, and non-polar flux residues from complex components. Its low surface tension of 19.9 dynes/cm ensures excellent wetting and penetration, while its boiling point of 48°C enables efficient vapor degreasing with reduced energy consumption.
Novec 73DE offers a compelling combination of performance and sustainability — zero ozone depletion potential, an ultra-low GWP of 47, and zero ozone depletion potential. Compared to aqueous cleaning, vapor degreasing with Novec 73DE delivers faster cycle times, lower energy usage, and improved cleaning of parts with complex geometries. With a favorable safety profile (100/200 ppm exposure guideline), nonflammability, and t-DCE not classified as a Hazardous Air Pollutant, Novec 73DE provides a cost-effective, environmentally responsible solution for the most demanding degreasing applications.
Genuine 3M Imported Stock and Technical Support
We supply stable spot inventory of genuine 3M Novec 73DE engineered fluid. Official TDS, SDS, and batch COA documents are available for vapor degreasing, immersion cleaning, and heavy-duty solvent applications.
Request Novec 73DE Quotation, TDS, SDS, and Sample
Complete SDS, COA, and technical documentation available
Core Advantages of 3M Novec 73DE Engineered Fluid
- Highest solvency: KB value 83 — unmatched cleaning power for heavy greases, oils, waxes, and silicones
- Heavy duty vapor degreasing — designed for vapor degreasers and immersion cleaning applications
- Ultra-low GWP: 47 — environmentally sustainable alternative to nPB, TCE, HCFCs, and high-GWP HFCs
- Zero ozone depletion potential — environmentally responsible formulation
- Nonflammable — no flash point, safe for industrial cleaning operations
- Low surface tension: 19.9 dynes/cm — excellent wetting and penetration for complex geometries
- Cost-effective replacement — faster cycle times and lower energy usage than aqueous cleaning
- Favorable regulatory profile — t-DCE is not a Hazardous Air Pollutant (HAP)
Main Applications
- Heavy duty vapor degreasing — cleaning of heavy greases, oils, waxes, and silicones from metal and plastic components
- Immersion cleaning — effective cleaning of complex geometries and assemblies
- Spray cleaning — precision cleaning of sensitive components and assemblies
- Non-polar flux residue removal — cleaning of flux residues from electronic assemblies
- Lubricant deposition — carrier fluid for lubricant applications where high solvency is desired
- Replacement for nPB, TCE, HCFC-225, HCFC-141b — drop-in replacement for hazardous chlorinated and fluorinated solvents
Full Technical Parameters
| Property | Typical Value | Test Method |
| Type | Hydrofluoroether + t-DCE Blend | — |
| Boiling Point | 48°C | ASTM D1078 |
| Liquid Density (25°C) | 1.28 g/ml | ASTM D891 |
| Surface Tension | 19.9 dynes/cm | — |
| Vapor Pressure (20°C) | 263 mmHg | — |
| Viscosity (25°C) | 0.38 cP | — |
| Kauri-Butanol Value | 83 | — |
| Heat of Vaporization | 54.2 cal/g | — |
| Ozone Depletion Potential | 0 | — |
| Global Warming Potential | 47 | — |
| Flash Point | None | — |
| Flammability | Nonflammable | ASTM E681-94 |
| Exposure Guideline (8hr TWA) | 100 / 200 ppm | — |
| Shelf Life | 24 months | — |
Note: All listed figures are typical values and may vary by production batch. Complete independent qualification testing is required before mass production deployment.
Handling and Storage Recommendations
| Storage Rules | Store sealed original containers below 38°C in a dry, well-ventilated area away from heat sources and direct sunlight. |
| Shelf Life | 24 months from date of manufacture when stored in original unopened containers at 21°C and 50% RH. |
| Pressure Warning | Contents may be under pressure if shipped at elevated temperatures. Open container slowly to vent pressure. |
| Freeze Protection | Protect from freezing. If stored below -10°C, mix before use. |
| Operation Protection | Maintain adequate ventilation. Wear nitrile protective gloves and anti-splash safety goggles during handling. |
Official Technical Documentation
| Document Type | Document Introduction | Document Request |
| TDS | 3M Novec 73DE original factory technical data sheet | Request TDS |
| SDS | Safety data sheet covering transport, storage, and handling guidelines | Request SDS |
| COA | Batch-specific certificate of analysis | Request COA |
Frequently Asked Questions
What is 3M Novec 73DE Engineered Fluid?
3M Novec 73DE is a heavy duty vapor degreasing and immersion cleaning fluid with high solvency (KB value 83). It is designed as a cost-effective replacement for n-propyl bromide (nPB), trichloroethylene (TCE), HCFCs, and high GWP HFCs.
What is the KB value of Novec 73DE?
Novec 73DE has a Kauri-Butanol (KB) value of 83, the highest in the Novec series, providing exceptional solvency for removal of heavy greases, oils, waxes, silicones, and non-polar flux residues.
What is the GWP of Novec 73DE?
Novec 73DE has a very low global warming potential (GWP) of 47 and zero ozone depletion potential, making it an environmentally sustainable alternative to traditional chlorinated and fluorinated solvents.
Is Novec 73DE flammable?
No. Novec 73DE is nonflammable with no flash point, providing safe operation in vapor degreasing and immersion cleaning applications.
What applications is Novec 73DE suitable for?
Novec 73DE is ideal for heavy duty vapor degreasing, immersion cleaning, spray cleaning, removal of heavy greases, oils, waxes, silicones, non-polar flux residues, and lubricant deposition applications requiring high solvency.
What is the shelf life of Novec 73DE?
Novec 73DE has a shelf life of 24 months from date of manufacture when stored in original unopened containers at 21°C and 50% relative humidity.
Is t-DCE in Novec 73DE a Hazardous Air Pollutant?
No. trans-1,2-dichloroethylene (t-DCE) is not considered a Hazardous Air Pollutant (HAP), making Novec 73DE less regulated than traditional chlorinated solvents like trichloroethylene or perchloroethylene.
Related 3M Novec Engineered Fluids
Compare 3M Novec engineered fluids for different degreasing and cleaning requirements.
| Product Grade | KB Value | Boiling Point | GWP | Core Application |
| Novec 73DE | 83 | 48°C | 47 | Heavy duty degreasing |
| Novec 72DE | 52 | 43°C | 435 | Medium-heavy degreasing |
| Novec 71DE | 27 | 41°C | 160 | Medium-duty degreasing |
Get 3M Novec 73DE Bulk Pricing and Technical Support
We supply genuine 3M Novec 73DE engineered fluid for heavy duty vapor degreasing, immersion cleaning, and high-solvency solvent applications. Contact us for bulk pricing, sample availability, technical documents, and application support.
Request Novec 73DE Technical Details
Disclaimer: All technical data on this page are for general guidance only and are not product specifications. Buyers must carry out independent trials and verify suitability before bulk ordering. Actual values may vary between production lots.
