描述
VESTAMID eCO LX9012 T8 B80 is a heat-stabilized and light-resistant polyamide 12 (PA12) compound from Evonik Operations GmbH. It has been especially developed for the extrusion and co-extrusion of ski upper and decorative films. Decoration on the bottom side of injection molded sports shoe soles is a further application field.
Films made of VESTAMID eCO LX9012 T8 B80 feature high transparency, good screen and sublimation printing, outstanding scratch resistance, and excellent impact strength at low temperatures. The semi-crystalline compounds based on PA 12 absorb only low quantities of water. Therefore, molded parts show excellent dimensional stability, constantly high impact strength, low coefficient of friction and good chemical resistance at changing ambient humidity.
The “eCO” designation stands for Evonik’s aim to reduce CO₂ through the use of renewable or circular feedstocks via a mass-balance approach. VESTAMID eCO products are manufactured with renewable energy and raw materials procured from sustainable sources, offering up to 70% less carbon footprint compared to conventional VESTAMID grades, with the exact same quality, properties, and performance.
The material is supplied as cylindrical granules, ready for processing in moisture-proof packaging.
For more VESTAMID grades and technical information, please visit our Engineering Plastics product page.
Key Features of VESTAMID eCO LX9012 T8 B80
| # | Feature | Benefit |
|---|---|---|
| 1 | Heat Stabilized & Light Resistant | Maintains properties under thermal, UV, and light exposure |
| 2 | High Transparency | Excellent optical clarity for decorative film applications |
| 3 | Good Screen & Sublimation Printing | Enables high-quality decoration and branding |
| 4 | Outstanding Scratch Resistance | Durable surface for demanding applications |
| 5 | Excellent Low-Temperature Impact Strength | Reliable performance in cold environments |
| 6 | Low Water Absorption | Excellent dimensional stability under changing ambient humidity |
| 7 | Low Coefficient of Friction | Good sliding properties for film and molded parts |
| 8 | Good Chemical Resistance | Resistant to general chemicals and hydrolysis |
| 9 | Up to 70% Lower CO₂ Footprint | Mass balance approach with renewable energy and circular feedstocks |
| 10 | Drop-in Performance | Same quality, properties, and performance as conventional grades |
| 11 | Wide Processing Window | Suitable for extrusion and co-extrusion |
| 12 | Shelf Life ≥ 2 Years | Long-term storage stability when kept dry at ≤ 30°C |
Sustainability Profile
VESTAMID eCO LX9012 T8 B80 belongs to Evonik’s VESTAMID eCO product line, which delivers significant environmental benefits through a mass balance approach:
| Aspect | Details |
|---|---|
| eCO Concept | Evonik’s aim to reduce CO₂ through use of renewable or circular feedstocks via mass-balance approach |
| CO₂ Reduction | Up to 70% less carbon footprint compared to conventional VESTAMID grades |
| Raw Material Sources | 1) Bio-based raw materials such as vegetable oils; 2) Bio-circular raw materials such as residual materials from forestry and agriculture; 3) Recyclable raw materials such as old tires and used plastics |
| Production | Manufactured with renewable energy |
| Performance | Same exact quality, properties, and performance as conventional grades |
| Certification | Externally certified life cycle assessments (LCAs) by TÜV Rheinland |
Typical Applications for VESTAMID eCO LX9012 T8 B80
| Industry | Typical Components & Considerations |
|---|---|
| Ski Upper Films | Ski boot upper films – requiring high transparency, scratch resistance, and low-temperature impact strength |
| Decorative Films | Decorative protective films for skis and snowboards – requiring printability and surface quality |
| Sports Shoe Sole Decoration | Decoration on the bottom side of injection molded sports shoe soles – requiring transparency and printability |
| Sports & Lifestyle | Transparent sports shoe soles, functional film elements |
| Outdoor Equipment | Films and components for outdoor sports equipment requiring UV and cold resistance |
Typical Properties of VESTAMID eCO LX9012 T8 B80
| Property | Value | Test Method |
|---|---|---|
| Physical | ||
| Density | 1.01 g/cm³ | ISO 1183 |
| Water Absorption (Saturation, 23°C) | ~0.2% | Sim. to ISO 62 |
| Moisture Absorption (23°C, 50% RH) | ~0.1% | Sim. to ISO 62 |
| Molding Shrinkage – Parallel | 0.3 – 0.8% | ISO 294-4, 2577 |
| Molding Shrinkage – Normal | 0.7 – 1.2% | ISO 294-4, 2577 |
| Melt Volume-Flow Rate (MVR) | 10 cm³/10 min | ISO 1133 |
| Mechanical | ||
| Tensile Modulus | 1,100 MPa | ISO 527 |
| Tensile Strength at Break | ≥ 40 MPa | ISO 527 |
| Elongation at Break | ≥ 200% | ISO 527 |
| Shore D Hardness | ~75 | ISO 7619-1 |
| Impact | ||
| Charpy Unnotched Impact (23°C) | No Break | ISO 179/1eU |
| Charpy Notched Impact (23°C) | ~10 kJ/m² | ISO 179/1eA |
| Thermal | ||
| Melting Temperature | ~178°C | ISO 11357 |
| HDT @ 0.45 MPa | ~120°C | ISO 75-2/B |
| HDT @ 1.80 MPa | ~50°C | ISO 75-2/A |
| Electrical | ||
| Volume Resistivity | ≥ 1×10¹³ Ω·m | IEC 62631 |
| Dielectric Strength | ≥ 25 kV/mm | IEC 60243 |
| Flammability | ||
| Flammability @ 1.6 mm | HB | UL 94 |
Important Notes on Typical Data
📌 Values are typical – The data listed above is sourced from manufacturer data sheets for reference only and does not constitute binding product specifications for VESTAMID eCO LX9012 T8 B80. Values are indicative based on the PA12 compound family.
📌 Batch variations – Batch-to-batch deviations may exist. For critical applications, validate performance with batch-specific COA certificates.
📌 Pigmentation – The use of colorants or pigmentation may affect property values.
📌 Final performance – Actual performance depends on processing conditions and part design. Refer to ISO testing standards for detailed methodology.
📌 Authoritative reference – The manufacturer’s official TDS shall serve as the definitive technical reference. Request the latest official TDS from our sales team.
Processing Guidelines for VESTAMID eCO LX9012 T8 B80
| Step | Process |
|---|---|
| Processing Methods | Extrusion, Co-Extrusion (Film) |
| Drying Recommended | Yes |
| Drying Temperature | 80°C |
| Drying Time | 4 – 6 hours |
| Suggested Max Moisture | ≤ 0.10% |
| Processing (Melt) Temperature | 190 – 230°C |
| Optimum Melt Temperature | 210 – 220°C |
| Mold/Die Temperature | 40 – 80°C |
| Storage | Store in original, sealed packaging in a cool, dry place away from direct sunlight. Shelf life of at least 2 years when stored in dry rooms at ≤ 30°C |
Critical Processing Warnings for VESTAMID eCO LX9012 T8 B80
⚠️ Drying Requirement – VESTAMID eCO LX9012 T8 B80 should be dried prior to processing to ensure maximum part quality. Suggested maximum moisture content is ≤ 0.10%.
⚠️ Processing Temperature – The recommended processing (melt) temperature range is 190–230°C. Avoid exceeding 230°C to prevent material degradation.
⚠️ Pigmentation – The use of colorants or pigmentation may affect property values. Validate performance with colored batches for critical applications.
⚠️ Storage – Store in original, sealed packaging in a cool, dry place away from direct sunlight. Shelf life of at least 2 years when stored in dry rooms at temperatures not exceeding 30°C.
Comparison: VESTAMID eCO LX9012 T8 B80 vs. Standard VESTAMID LX9012 T8
| Feature | VESTAMID eCO LX9012 T8 B80 | VESTAMID LX9012 T8 |
|---|---|---|
| Material Type | Heat Stabilized PA12 (eCO) | Heat Stabilized PA12 |
| Key Feature | Up to 70% lower CO₂ footprint | Conventional production |
| CO₂ Reduction | Up to 70% | Baseline |
| Raw Materials | Bio-based, bio-circular, recyclable feedstocks (mass balance) | Fossil-based |
| Production Energy | Renewable energy | Conventional energy |
| Performance | Identical | — |
| Density | 1.01 g/cm³ | ~1.01 g/cm³ |
| Tensile Modulus | 1,100 MPa | ~1,100 MPa |
| Primary Application | Sustainable ski upper films & decorative films | Ski upper films & decorative films |
Related Products
-
Engineering Plastics – Browse all engineering plastic materials
-
VESTAMID eCO LX9039 BBM100 – Unmodified, medium viscosity PA12 without stabilizers
-
VESTAMID eCO E40 CC50 – Sustainable PEBA elastomer for sport shoe soles
-
VESTAMID LX9012 T8 – Conventional PA12 compound for ski upper and decorative films
-
About Our Company – Learn more about our supply capabilities and quality assurance
Technical Documents
| Document Type | Description & Source |
|---|---|
| Manufacturer Official TDS | Complete physical, thermal, and mechanical properties |
| Manufacturer Official SDS | GHS-compliant safety documentation |
| COA (Certificate of Analysis) | Batch-specific quality certification |
| LCA Certification | TÜV Rheinland certified LCA data (ISO 14040, 14044) |
Request any document above by:
📧 Email: ruiqingchem@gmail.com
📝 Online form: Our contact page
We reply within one working business day. Please clearly state product (VESTAMID eCO LX9012 T8 B80) and document type you require.
FAQ
Q1: What is VESTAMID eCO LX9012 T8 B80?
A: VESTAMID eCO LX9012 T8 B80 is a heat-stabilized and light-resistant polyamide 12 (PA12) compound from Evonik, especially developed for the extrusion and co-extrusion of ski upper and decorative films.
Q2: What does “eCO” stand for?
A: “eCO” stands for Evonik’s aim to reduce CO₂ through the use of renewable or circular feedstocks via a mass-balance approach.
Q3: How much can the CO₂ footprint be reduced?
A: VESTAMID eCO products offer up to 70% less carbon footprint compared to conventional VESTAMID grades.
Q4: Does the eCO version affect material performance?
A: No. VESTAMID eCO products have the same exact quality, properties, and performance as conventional grades, and customers can fully benefit from these more sustainable solutions while preserving their processes and existing manufacturing-chain certifications.
Q5: What are the key features?
A: Heat stabilized and light resistant; high transparency; good screen and sublimation printing; outstanding scratch resistance; excellent low-temperature impact strength; low water absorption; excellent dimensional stability; low coefficient of friction; good chemical resistance; up to 70% lower CO₂ footprint.
Q6: What are the typical applications?
A: Ski upper films, decorative protective films for skis and snowboards, decoration on the bottom side of injection molded sports shoe soles, and transparent sports shoe soles.
Q7: What is the density?
A: 1.01 g/cm³ (ISO 1183).
Q8: What is the melting temperature?
A: ~178°C (ISO 11357).
Q9: What is the tensile modulus?
A: ~1,100 MPa (ISO 527).
Q10: What is the recommended processing temperature?
A: Processing (melt) temperature: 190–230°C.
Q11: What is the recommended drying condition?
A: Dry at 80°C for 4–6 hours. Maximum residual moisture should be ≤ 0.10%.
Q12: What regions is this grade available in?
A: Europe and North America.
Q13: Is VESTAMID eCO LX9012 T8 B80 light stabilized?
A: Yes, it is heat stabilized and light resistant.
Q14: What is the shelf life?
A: At least 2 years when stored in dry rooms at temperatures not exceeding 30°C.
Q15: Is VESTAMID eCO LX9012 T8 B80 suitable for film extrusion?
A: Yes, it is especially developed for the extrusion and co-extrusion of ski upper and decorative films.
Q16: What raw material sources are used for eCO products?
A: Evonik offers raw materials for eCO products from three sources: bio-based raw materials such as vegetable oils; bio-circular raw materials such as residual materials from forestry, agriculture, or food scraps; and recyclable raw materials such as old tires and used plastics.
Q17: Does VESTAMID eCO LX9012 T8 B80 have LCA certification?
A: Yes, Evonik provides externally certified life cycle assessments (LCAs) by TÜV Rheinland following ISO 14040 and 14044 standards.
Q18: What is the water absorption of VESTAMID eCO LX9012 T8 B80?
A: Approximately 0.2% at saturation, 23°C (Sim. to ISO 62).
Q19: What is the Shore D hardness?
A: ~75 (ISO 7619-1).
Q20: Is VESTAMID eCO LX9012 T8 B80 a drop-in replacement?
A: Yes, it is fully compatible with existing manufacturing processes and has the same performance properties as conventional grades.
CTA (Call to Action)
Ready to order VESTAMID eCO LX9012 T8 B80?
To get a precise quotation and professional technical support, please share:
-
Required quantity (kg)
-
Destination port or delivery address
-
Target application (ski upper films, decorative films, sports shoe sole decoration, etc.)
-
Document requirements (TDS, SDS, COA, LCA certification)
Sample Policy:
-
Samples are for laboratory validation tests only, not for production use.
-
Buyer bears international sample-shipping freight.
-
If bulk-product performance deviates from sample reference, the manufacturer’s official TDS serves as the authoritative benchmark.
Take action now:
📧 Email Us – ruiqingchem@gmail.com
📝 Send Inquiry – Use our quick inquiry form
💬 Live Chat – Click the bottom-right chat widget to speak directly with our team
After-Sales Support
| Service | Details |
|---|---|
| Quality Inspection Period | All quality-related claims must be submitted within 7 working days after delivery, supported by test data and photographic evidence. |
| Return / Exchange Policy | Confirmed product defects caused by our side trigger replacement or refund. Terms and conditions apply. |
| Logistics Damage | Report shipping damage directly to carrier immediately upon goods receipt. We assist with claim-document preparation. |
| Technical Support | Remote technical guidance available. On-site troubleshooting can be arranged upon special request. |
| Export Documentation | We supply commercial invoice, packing list, bill of lading, COA, and additional compliance certificates on request. |
Disclaimer
DISCLAIMER: All technical data is referenced from original manufacturer typical values for VESTAMID eCO LX9012 T8 B80. Our company acts as supplier/trader rather than original manufacturer. Final performance depends on processing conditions and part design. Buyers shall independently validate product suitability for individual applications. Our firm bears no liability for product failure caused by improper processing or improper usage. Always reference the latest manufacturer official TDS of VESTAMID eCO LX9012 T8 B80 as the definitive specification.
