描述
ULTEM Resin 9075 is a high flow, unreinforced polyetherimide (PEI) blend manufactured by SABIC. As an authorized distributor and trader, we supply genuine SABIC materials with full traceability.
ULTEM 9075 is specifically engineered for applications requiring advanced flame, smoke, and toxicity (FST) performance combined with excellent flow characteristics. Key attributes include:
-
High Flow – Exceptional flow characteristics for processing complex, thin-walled parts
-
Flame Retardant – Meets FAR 25.853 and OSU 65/65 with low toxicity, smoke, and flame evolution
-
High Stiffness & Strength – Tensile modulus of 3,300 MPa; tensile strength of 96 MPa
-
Excellent Dimensional Stability – Low shrinkage (0.5-0.7%) and low creep sensitivity
-
Good Chemical Resistance – Resists many chemicals
-
Hydrolytic Stability – Good resistance to moisture and hydrolysis
-
Low Smoke & Toxicity – Inherently low smoke and toxicity; meets aerospace and rail requirements
-
ECO Conforming – Meets environmental compliance standards
-
PFAS-Free – No PFAS intentionally added during manufacturing
-
Sustainable Option – ISCC+ certified renewable bio-based solutions available
-
Versatile Processing – Suitable for injection molding and profile extrusion
Key Features of ULTEM 9075
-
High Flow Polyetherimide Blend – Exceptional flow characteristics for processing complex, thin-walled parts; ideal for injection molding and profile extrusion
-
Advanced Flame, Smoke & Toxicity (FST) Performance – Meets FAR 25.853 and OSU 65/65 regulations with low toxicity, smoke, and flame evolution
-
Amorphous Structure – Transparent amber appearance providing dimensional stability across a broad temperature range
-
High Mechanical Strength – Tensile modulus of 3,300 MPa (ASTM) ; tensile yield stress of 96 MPa; flexural modulus of 3,240 MPa
-
Excellent Dimensional Stability – Low mold shrinkage of 0.5-0.7% (flow and transverse); low creep sensitivity
-
Inherent Flame Retardancy – Non-halogenated flame retardant; UL94 V-0 rated; oxygen index of 47%
-
Low Smoke & Low Toxicity – Inherently low smoke and toxicity; suitable for aerospace, mass transit, and rail applications
-
Good Chemical Resistance – Resists many chemicals
-
Hydrolytic Stability – Good resistance to moisture and hydrolysis
-
Good Processability – High flow enables thin-wall molding down to 1.2 mm
-
ECO Conforming – Meets environmental compliance standards
-
PFAS-Free – No PFAS intentionally added during manufacturing
-
Sustainable Option – ISCC+ certified renewable bio-based solutions available via differentiated color nomenclature
-
Good Metal Adhesion – Suitable for applications requiring metal bonding
-
Versatile Processing – Suitable for injection molding and profile extrusion
-
Customizable Colors – All colors customizable via ColorXpress
Typical Applications for ULTEM 9075
| Industry | Typical Applications |
|---|---|
| Aerospace | Aircraft interior components, cabin interiors, panels – FAR 25.853 & OSU 65/65 compliant; low smoke and toxicity |
| Rail & Mass Transportation | Rail systems, mass transportation interiors – FST compliant |
| Electrical & Electronics | Electrical housings, connectors – flame retardant, high heat resistance |
| Automotive | Aerospace-related automotive applications |
| Industrial | Structural applications requiring FST compliance and high flow |
Typical Properties
| Property | ULTEM 9075 | Unit | Test Method |
|---|---|---|---|
| Physical | |||
| Specific Gravity | 1.30 | g/cm³ | ASTM D792 |
| Mold Shrinkage, Flow (3.2mm) | 0.50 – 0.70 | % | SABIC Method |
| Mold Shrinkage, Transverse (3.2mm) | 0.50 – 0.70 | % | SABIC Method |
| Melt Flow Rate (MFR) – 295°C/6.6kg | 2.4 | g/10min | ASTM D1238 |
| Mechanical | |||
| Tensile Modulus | 3,300 | MPa | ASTM D638 |
| Tensile Strength (Yield) | 96 – 96.5 | MPa | ASTM D638 |
| Elongation at Break | 85 | % | ASTM D638 |
| Flexural Modulus | 3,240 | MPa | ASTM D790 |
| Flexural Strength (Yield) | 144 | MPa | ASTM D790 |
| Flexural Strength (Break) | 141 | MPa | ASTM D790 |
| Impact | |||
| Izod Impact (Notched, 23°C) | 69 | J/m | ASTM D256 |
| Izod Impact (Reverse Notched, 3.2mm) | 2,082 | J/m | ASTM D256 |
| Gardner Impact, 23°C | 35 | J | ASTM D3029 |
| Flame Characteristics | |||
| FAA Flammability, FAR 25.853 A/B | SECT A-1 | — | FAR 25.853 |
| OSU Total Heat Release (2 min) | 10 | kW-min/m² | FAR 25.853 |
| Vertical Burn (60s) passes at | 1 | Seconds | FAR 25.853 |
| Vertical Burn (12s) passes at | 0 | Seconds | FAR 25.853 |
| Thermal | |||
| Glass Transition Temperature (Tg) | 217 | °C | — |
| Heat Deflection Temp. (1.82MPa) | 188-190 | °C | ASTM D648 |
| Thermal Conductivity | 0.26 | W/m-°C | ISO |
Important Notes on Typical Data:
-
Values listed are typical and sourced from SABIC official data sheets. They do not constitute binding product specification.
-
Batch-to-batch deviations may exist. For critical applications, validate performance with batch-specific COA certificate.
-
Final performance depends on processing conditions, mold design, and part geometry.
-
SABIC official TDS shall serve as definitive technical reference. Request the latest official TDS from our sales team.
Processing Guidelines
| Parameter | Recommended Conditions | |
|---|---|---|
| Drying | ||
| Drying Temperature | 135 – 145°C | |
| Drying Time | 4 – 6 hours | |
| Drying Time (Cumulative) | 10 hours | |
| Maximum Moisture Content | 0.02% | |
| Injection Molding | ||
| Melt Temperature | 350 – 370°C | |
| Nozzle Temperature | 350 – 370°C | |
| Front Zone 3 Temperature | 350 – 370°C | |
| Middle Zone 2 Temperature | 345 – 365°C | |
| Rear Zone 1 Temperature | 340 – 360°C | |
| Mold Temperature | 135 – 165°C | |
| Back Pressure | 0.3 – 0.7 MPa | |
| Screw Speed | 40 – 70 rpm | |
| Shot to Cylinder Size | 40 – 60% | |
| Vent Depth | 0.025 – 0.076 mm |
Critical Processing Warnings:
-
Drying: ULTEM 9075 is hygroscopic and must be dried to <0.02% moisture before processing. Dry at 135-145°C for 4-6 hours.
-
High Flow: This grade offers high flow characteristics for easier processing and better mold filling of complex, thin-walled parts.
-
Melt Temperature: Recommended melt temperature range is 350-370°C. Avoid excessive residence times to prevent thermal degradation.
-
Mold Temperature: Higher mold temperatures (135-165°C) improve flow and reduce residual stress.
-
Gate Design: Use large gates and runners to minimize flow resistance and reduce molded-in stress.
-
Regrind: Regrind can be used up to 20-25% with virgin material, provided it is clean and properly dried.
-
Processing Methods: Suitable for injection molding and profile extrusion.
Related Products
-
Explore PEI / Polyetherimide – Browse all ULTEM PEI resin options
-
Explore Engineering Plastics – Browse all engineering plastic materials
-
About Our Company – Learn more about our supply capabilities and quality assurance
Technical Documents
| Document Type | Description & Source |
|---|---|
| SABIC Official TDS | Complete physical, thermal, and mechanical properties of ULTEM 9075 |
| SABIC Official SDS | GHS-compliant chemical safety documentation |
| UL Yellow Card | UL certification |
| FAR 25.853 / OSU 65/65 Compliance | Flame, smoke, and toxicity certification |
| ISCC+ Certification | Bio-based renewable certification |
| COA (Certificate of Analysis) | Batch-specific quality certification |
| Processing Guide | Detailed processing guidelines for ULTEM resins |
Request any document above by:
-
Email:
ruiqingchem@gmail.com -
Online form: Our contact page
We reply within one working business day. Please clearly state product (ULTEM 9075) and document type you require.
FAQ
Q1: What is ULTEM 9075 and what is it used for?
A: ULTEM 9075 is a high flow, unreinforced polyetherimide (PEI) blend manufactured by SABIC. It is specifically engineered for applications requiring advanced flame, smoke, and toxicity (FST) performance. It is widely used in aerospace interiors, rail systems, mass transportation, electrical housings, and structural applications where FST compliance and high flow are required.
Q2: What flame, smoke, and toxicity standards does ULTEM 9075 meet?
A: ULTEM 9075 meets FAR 25.853 and OSU 65/65 regulations with low toxicity, smoke, and flame evolution.
Q3: Is ULTEM 9075 flame retardant?
A: Yes. ULTEM 9075 is inherently flame retardant with UL94 V-0 rating. It is non-halogenated flame retardant with an oxygen index of 47%.
Q4: What is the glass transition temperature of ULTEM 9075?
A: The glass transition temperature (Tg) is 217°C.
Q5: What is the density of ULTEM 9075?
A: The density is 1.30 g/cm³.
Q6: Is ULTEM 9075 PFAS-free?
A: Yes. ULTEM 9075 has no PFAS intentionally added during manufacturing.
Q7: What is the melt flow rate of ULTEM 9075?
A: The Melt Flow Rate (MFR) is 2.4 g/10min at 295°C, 6.6kg.
Q8: What processing methods can be used for ULTEM 9075?
A: ULTEM 9075 can be processed by injection molding and profile extrusion.
Q9: What is the tensile strength of ULTEM 9075?
A: Tensile yield strength is 96 MPa.
Q10: What is the tensile modulus of ULTEM 9075?
A: The tensile modulus is 3,300 MPa.
Q11: What is the shrinkage of ULTEM 9075?
A: Mold shrinkage (flow, 3.2mm) is 0.50-0.70%.
Q12: Is there a sustainable/bio-based version of ULTEM 9075?
A: Yes. ISCC+ certified renewable bio-based solutions are available for this grade via differentiated color nomenclature.
Q13: What is the lead time for orders?
A: Regular orders ship within 7-10 working days after payment confirmation. Large-volume or urgent orders can be negotiated separately.
CTA (Call to Action)
Ready to order ULTEM 9075?
To get a precise quotation and professional technical support, please share:
-
Required quantity (kg)
-
Destination port or delivery address
-
Target application (aerospace, rail, mass transportation, electrical, etc.)
-
Processing method (injection molding, profile extrusion)
-
Color requirement (amber or custom color)
-
Bio-based preference (standard or ISCC+ certified renewable grade)
-
Document requirement (TDS, SDS, UL, FAR 25.853 compliance, COA, etc.)
Sample Policy:
-
Samples are for laboratory validation tests only, not for production use.
-
Buyer bears international sample-shipping freight.
-
If bulk-product performance deviates from sample reference, SABIC official TDS serves as the authoritative benchmark.
Take action now:
-
📧 Email Us –
ruiqingchem@gmail.com -
📝 Send Inquiry – Use our quick inquiry form
-
💬 Live Chat – Click the bottom-right chat widget to speak directly with our team
After-Sales Support
| Service | Details |
|---|---|
| Quality Inspection Period | All quality-related claims must be submitted within 7 working-days after delivery, supported by test data and photographic evidence. |
| Return / Exchange Policy | Confirmed product defects caused by our side trigger replacement or refund. Terms and conditions apply. |
| Logistics Damage | Report shipping damage directly to carrier immediately upon goods receipt. We assist with claim-document preparation. |
| Technical Support | Remote technical guidance available. On-site troubleshooting can be arranged upon special request. |
| Export Documentation | We supply commercial invoice, packing list, bill of lading, COA, and additional compliance certificates (e.g., FAR 25.853, UL, RoHS, ISCC+) on request. |
Disclaimer
DISCLAIMER: All technical data is referenced from original SABIC typical values for ULTEM 9075. Our company acts as authorized distributor/trader rather than original manufacturer. Final performance depends on processing conditions, mold design, and part geometry. Buyers shall independently validate product suitability for individual applications. Our firm bears no liability for product failure caused by improper processing or improper usage. Always reference the latest SABIC official TDS of ULTEM 9075 as the definitive specification.
