描述
ULTEM Resin 2110R is a 10% glass fiber reinforced, amorphous polyetherimide (PEI) engineering thermoplastic manufactured by SABIC. As an authorized distributor and trader, we supply genuine SABIC materials with full traceability. For more product options and company information, please visit our website at https://szrqchem.com/.
ULTEM 2110R is a 10% glass fiber reinforced, enhanced flow grade featuring internal mold release, delivering an outstanding balance of mechanical, thermal, and electrical properties with increased stiffness. Key attributes include:
-
10% Glass Fiber Reinforcement – Increased stiffness, strength, and dimensional stability compared to unreinforced grades
-
Enhanced Flow – Improved flow characteristics for easier processing and better mold filling of complex parts
-
Internal Mold Release – Enhanced demolding for improved processing efficiency
-
High Heat Resistance – Glass transition temperature (Tg) of 217°C; RTI of 170°C
-
Inherent Flame Retardancy – UL94 V-0 (0.41mm) and 5VA (1.9mm) ratings without additives
-
High Stiffness & Strength – Tensile modulus of 4,500-4,620 MPa; tensile strength of 115 MPa
-
Excellent Dimensional Stability – Low creep sensitivity, low shrinkage (0.40-0.60%), and low warpage
-
Hydrolytic Stability – Good resistance to moisture and hydrolysis
-
Low Smoke & Toxicity – Inherently low smoke and toxicity; combustion products are no more toxic than wood
-
Good Chemical Resistance – Resists automotive fluids, aircraft fluids, alcohols, acids, and weak aqueous solutions
-
Good Metal Adhesion – Suitable for applications requiring metal bonding
-
ECO Conforming – Meets environmental compliance standards
-
Sustainable Option – ISCC+ certified bio-based version available
Key Features of ULTEM 2110R
-
10% Glass Fiber Reinforced – Provides increased stiffness, strength, and dimensional stability compared to unreinforced grades
-
Enhanced Flow – Improved flow characteristics for easier processing and better mold filling of complex, thin-walled parts
-
Internal Mold Release – Formulated with internal mold release agents for improved demolding and processing efficiency
-
High Heat Resistance – Glass transition temperature of 217°C; heat deflection temperature of 205-208°C at 1.8 MPa; Vicat softening temperature of 223°C; RTI of 170°C
-
Inherent Flame Retardancy – UL94 V-0 (0.41mm) and 5VA (1.9mm) ratings; oxygen index of 47%
-
High Mechanical Strength – Tensile modulus of 4,500-4,620 MPa; tensile strength of 115 MPa; flexural modulus of 4,500-5,240 MPa; flexural strength of 185-200 MPa
-
Excellent Dimensional Stability – Low mold shrinkage (0.40-0.60%); low creep sensitivity and low warpage
-
Good Chemical Resistance – Resists automotive and aircraft fluids, aliphatic hydrocarbons, alcohols, acids, and weak aqueous solutions
-
Hydrolytic Stability – Good resistance to moisture and hydrolysis
-
Outstanding Electrical Properties – Arc resistance PLC 6; CTI (Comparative Tracking Index) PLC 4
-
Low Smoke & Low Toxicity – Inherently low smoke and toxicity; combustion products are no more toxic than wood
-
Good Metal Adhesion – Suitable for applications requiring metal bonding
-
ECO Conforming – Meets environmental compliance standards
-
Sustainable Option – ISCC+ certified bio-based version available
-
Versatile Processing – Suitable for injection molding, extrusion, thermoforming, and blow molding
Typical Applications for ULTEM 2110R
| Industry | Typical Applications |
|---|---|
| Aerospace | Aircraft interior components, panels, trim – low smoke and toxicity |
| Automotive | Heavy truck, motorcycle, under-hood sensors, connectors |
| Electrical & Electronics | Wireless communication, printer components, speaker/earphone parts, high-temperature connectors, IC sockets, lighting |
| Medical | Surgical instruments, pharmaceutical packaging, sterilizable medical equipment |
| Consumer Goods | Sports/leisure, personal accessories, home appliances, eyewear |
| Semiconductor | High-temperature wafer carriers, sockets |
| Industrial | High-performance structural components, precision parts, material handling |
| Mass Transportation | Rail, specialty vehicles |
| Building & Construction | Building components, water management |
Typical Properties
| Property | ULTEM 2110R | Unit | Test Method |
|---|---|---|---|
| Density / Specific Gravity | 1.34 | g/cm³ | ASTM D792 / ISO 1183 |
| Mold Shrinkage (Flow) | 0.40 – 0.60 | % | SABIC Method |
| Melt Flow Rate (MFR) – 337°C/6.6kg | 11.5 – 12 | g/10min | ASTM D1238 |
| Glass Transition Temperature (Tg) | 217 | °C | |
| Heat Deflection Temp. (1.8MPa) | 205 – 208 | °C | ASTM D648 / ISO 75 |
| Heat Deflection Temp. (0.45MPa) | 210 | °C | ISO 75 |
| Vicat Softening Temperature | 212 – 223 | °C | ASTM D1525 / ISO 306 |
| RTI (Elec/Imp/Str) | 170 | °C | UL 746 |
| Tensile Modulus – ASTM | 4,610 – 4,620 | MPa | ASTM D638 |
| Tensile Modulus – ISO | 4,500 | MPa | ISO 527 |
| Tensile Strength (Yield/Break) | 114 – 116 | MPa | ASTM D638 |
| Tensile Strength (Break) – ISO | 115 | MPa | ISO 527 |
| Elongation at Break | 4 – 6 | % | ASTM D638 / ISO 527 |
| Flexural Modulus – ASTM | 5,240 | MPa | ASTM D790 |
| Flexural Modulus – ISO | 4,500 | MPa | ISO 178 |
| Flexural Strength – ASTM | 200 | MPa | ASTM D790 |
| Flexural Strength – ISO | 185 | MPa | ISO 178 |
| Izod Impact (Notched, 23°C) – ASTM | 53 | J/m | ASTM D256 |
| Izod Impact (Unnotched) – ASTM | 400 | J/m | ASTM D4812 |
| Charpy Impact (Notched) – ISO | 7 | kJ/m² | ISO 179/2C |
| UL 94 Flammability | V-0 (0.41mm), 5VA (1.9mm) | – | UL 94 |
Important Notes on Typical Data:
-
Values listed are typical and sourced from SABIC official data sheets. They do not constitute binding product specification.
-
Batch-to-batch deviations may exist. For critical applications, validate performance with batch-specific COA certificate.
-
Final performance depends on processing conditions, mold design, and part geometry.
-
SABIC official TDS shall serve as definitive technical reference. Request the latest official TDS from our sales team.
Processing Guidelines
| Parameter | Recommended Conditions |
|---|---|
| Drying | 150°C for 4-6 hours |
| Recommended Moisture | ≤0.02% |
| Melt Temperature | 350 – 400°C |
| Rear Zone Temperature | 330 – 400°C |
| Middle Zone Temperature | 340 – 400°C |
| Front Zone Temperature | 345 – 400°C |
| Nozzle Temperature | 343 – 399°C |
| Mold Temperature | 135 – 165°C |
| Back Pressure | 0.3 – 0.7 MPa |
| Screw Speed | 40 – 70 rpm |
| Shot Size | 40-60% of cylinder capacity |
Critical Processing Warnings:
-
Drying: ULTEM 2110R is hygroscopic and must be dried to <0.02% moisture before processing. Dry at 150°C for 4-6 hours.
-
Enhanced Flow & Internal Mold Release: This grade offers improved flow characteristics and contains internal mold release agents for improved demolding and processing efficiency.
-
Melt Temperature: Recommended melt temperature range is 350-400°C. Avoid excessive residence times to prevent thermal degradation.
-
Mold Temperature: Higher mold temperatures (135-165°C) improve flow and reduce residual stress.
-
Gate Design: Use large gates and runners to minimize flow resistance and reduce molded-in stress.
-
Regrind: Regrind can be used up to 20-25% with virgin material, provided it is clean and properly dried.
Related Products
-
Explore PEI / Polyetherimide – Browse all ULTEM PEI resin options
-
Explore Engineering Plastics – Browse all engineering plastic materials
-
About Our Company – Learn more about our supply capabilities and quality assurance
Technical Documents
| Document Type | Description & Source |
|---|---|
| SABIC Official TDS | Complete physical, thermal, and mechanical properties of ULTEM 2110R |
| SABIC Official SDS | GHS-compliant chemical safety documentation |
| UL Yellow Card | UL certification E121562 |
| COA (Certificate of Analysis) | Batch-specific quality certification |
| ISCC+ Certification | Bio-based renewable certification |
| Processing Guide | Detailed processing guidelines for ULTEM resins |
Request any document above by:
-
Email:
ruiqingchem@gmail.com -
Online form: Our contact page
We reply within one working business day. Please clearly state product (ULTEM 2110R) and document type you require.
FAQ
Q1: What is ULTEM 2110R and what is it used for?
A: ULTEM 2110R is a 10% glass fiber reinforced polyetherimide (PEI) resin manufactured by SABIC with enhanced flow and internal mold release. It combines high heat resistance (Tg 217°C), inherent flame retardancy (UL94 V-0 & 5VA), and enhanced stiffness. It is widely used in aerospace, automotive, electrical/electronic components, medical devices, consumer goods, and industrial applications.
Q2: What is the difference between ULTEM 2100 and ULTEM 2110R?
A: The key differences are that ULTEM 2110R offers enhanced flow (MFR ~11.5-12 vs ~7 g/10min) and contains internal mold release for improved demolding. Both grades contain 10% glass fiber reinforcement and share similar mechanical, thermal, and electrical properties.
Q3: What is the glass fiber content of ULTEM 2110R?
A: ULTEM 2110R contains 10% glass fiber reinforcement.
Q4: What is the glass transition temperature of ULTEM 2110R?
A: The glass transition temperature (Tg) is 217°C.
Q5: What is the density of ULTEM 2110R?
A: The density is 1.34 g/cm³.
Q6: Is ULTEM 2110R flame retardant?
A: Yes. ULTEM 2110R is inherently flame retardant with UL94 V-0 (0.41mm) and 5VA (1.9mm) ratings.
Q7: What is the tensile modulus of ULTEM 2110R?
A: The tensile modulus is 4,500-4,620 MPa.
Q8: What processing methods can be used for ULTEM 2110R?
A: ULTEM 2110R can be processed by injection molding, extrusion, thermoforming, and blow molding.
Q9: Is ULTEM 2110R FDA compliant?
A: ULTEM 2110R is not specifically listed with FDA compliance. For food contact applications, please refer to food contact compliant grades such as ULTEM 2100F or contact our technical team.
Q10: Is there a sustainable/bio-based version of ULTEM 2110R?
A: Yes. An ISCC+ certified bio-based version is available for ULTEM 2110R.
Q11: What is the lead time for orders?
A: Regular orders ship within 7-10 working days after payment confirmation. Large-volume or urgent orders can be negotiated separately.
CTA (Call to Action)
Ready to order ULTEM 2110R?
To get a precise quotation and professional technical support, please share:
-
Required quantity (kg)
-
Destination port or delivery address
-
Target application (aerospace, automotive, electrical, medical, etc.)
-
Processing method (injection molding, extrusion, etc.)
-
Color requirement (custom colors available)
-
Bio-based preference (standard or ISCC+ certified renewable grade)
-
Document requirement (TDS, SDS, UL, COA, etc.)
Sample Policy:
-
Samples are for laboratory validation tests only, not for production use.
-
Buyer bears international sample-shipping freight.
-
If bulk-product performance deviates from sample reference, SABIC official TDS serves as the authoritative benchmark.
Take action now:
-
📧 Email Us –
ruiqingchem@gmail.com -
📝 Send Inquiry – Use our quick inquiry form
-
💬 Live Chat – Click the bottom-right chat widget to speak directly with our team
After-Sales Support
| Service | Details |
|---|---|
| Quality Inspection Period | All quality-related claims must be submitted within 7 working-days after delivery, supported by test data and photographic evidence. |
| Return / Exchange Policy | Confirmed product defects caused by our side trigger replacement or refund. Terms and conditions apply. |
| Logistics Damage | Report shipping damage directly to carrier immediately upon goods receipt. We assist with claim-document preparation. |
| Technical Support | Remote technical guidance available. On-site troubleshooting can be arranged upon special request. |
| Export Documentation | We supply commercial invoice, packing list, bill of lading, COA, and additional compliance certificates (e.g., UL, RoHS, ISCC+) on request. |
Disclaimer
DISCLAIMER: All technical data is referenced from original SABIC typical values for ULTEM 2110R. Our company acts as authorized distributor/trader rather than original manufacturer. Final performance depends on processing conditions, mold design, and part geometry. Buyers shall independently validate product suitability for individual applications. Our firm bears no liability for product failure caused by improper processing or improper usage. Always reference the latest SABIC official TDS of ULTEM 2110R as the definitive specification.
