ULTEM 2110EPR – 10% Glass Fiber Reinforced PEI Resin with Enhanced Electroplatability

ULTEM Resin 2110EPR is a 10% glass fiber reinforced, amorphous polyetherimide (PEI) engineering thermoplastic manufactured by SABIC. As an authorized distributor and trader, we supply genuine SABIC materials with full traceability. For more product options and company information, please visit our website at https://szrqchem.com/.

ULTEM 2110EPR is a high-performance, 10% glass fiber reinforced grade featuring enhanced electroplatability and high flow for improved processing. Key attributes include:

• 10% Glass Fiber Reinforcement – Increased stiffness, strength, and dimensional stability compared to unreinforced grades

• Enhanced Electroplatability – 4x higher plating adhesion than standard ULTEM 2000 series, optimized for electroplating applications

• High Flow – 30% better flow than standard ULTEM 2000 filled grades, enabling easier processing and filling of complex parts

• Internal Mold Release – Improved demolding for enhanced processing efficiency

• High Heat Resistance – Glass transition temperature (Tg) of 217°C; RTI up to 180°C

• Inherent Flame Retardancy – UL94 V-0 (0.4mm) and 5VA ratings without additives

• High Stiffness & Strength – Tensile modulus of 5,240 MPa; tensile strength of 119 MPa

• Excellent Dimensional Stability – Low creep sensitivity and low shrinkage (0.60-0.80%)

• Hydrolytic Stability – Good resistance to moisture and hydrolysis

• Good Chemical Resistance – Resists automotive fluids, aircraft fluids, alcohols, acids, and weak aqueous solutions

• Low Smoke & Toxicity – Combustion products are no more toxic than wood; oxygen index of 47%

• ECO Conforming – Meets environmental compliance standards

• Sustainable Option – ISCC+ certified bio-based version available

Key Features of ULTEM 2110EPR

• 10% Glass Fiber Reinforced – Provides increased stiffness, strength, and dimensional stability compared to unreinforced grades

• Enhanced Electroplatability – 4x higher plating adhesion than standard ULTEM 2000 series; specifically optimized for electroplating applications

• High Flow – 30% better flow than standard ULTEM 2000 filled grades; enables easier processing and filling of complex, thin-walled parts

• Internal Mold Release – Formulated with internal mold release agents for improved demolding and processing efficiency

• High Heat Resistance – Glass transition temperature of 217°C; heat deflection temperature of 205°C at 1.8 MPa; Vicat softening temperature of 210°C; RTI up to 180°C

• Inherent Flame Retardancy – UL94 V-0 (0.4mm) and 5VA ratings; oxygen index of 47%

• High Mechanical Strength – Tensile modulus of 5,240 MPa; tensile strength of 119 MPa; flexural modulus of 4,800-5,170 MPa

• Excellent Dimensional Stability – Low mold shrinkage (0.60-0.80%); low creep sensitivity and low warpage

• Good Chemical Resistance – Resists automotive and aircraft fluids, aliphatic hydrocarbons, alcohols, acids, and weak aqueous solutions

• Hydrolytic Stability – Good resistance to moisture and hydrolysis

• Low Smoke & Low Toxicity – Inherently low smoke and toxicity; suitable for aerospace and mass transit applications

• Good Metal Adhesion – Suitable for applications requiring metal bonding

• ECO Conforming – Meets environmental compliance standards

• Sustainable Option – ISCC+ certified renewable bio-based solutions available

• Versatile Processing – Suitable for injection molding, extrusion, thermoforming, and blow molding

Typical Applications for ULTEM 2110EPR

Typical Properties

Important Notes on Typical Data:

• Values listed are typical and sourced from SABIC official data sheets. They do not constitute binding product specification.

• Batch-to-batch deviations may exist. For critical applications, validate performance with batch-specific COA certificate.

• Final performance depends on processing conditions, mold design, and part geometry.

• SABIC official TDS shall serve as definitive technical reference. Request the latest official TDS from our sales team.

Processing Guidelines

Critical Processing Warnings:

• Drying: ULTEM 2110EPR is hygroscopic and must be dried to <0.02% moisture before processing. Dry at 150°C for 4-6 hours.

• High Flow: This grade offers 30% better flow than standard ULTEM 2000 filled grades, enabling easier processing and filling of complex parts.

• Internal Mold Release: This grade contains internal mold release agents for improved demolding.

• Melt Temperature: Recommended melt temperature range is 350-400°C. Avoid excessive residence times to prevent thermal degradation.

• Mold Temperature: Higher mold temperatures (135-165°C) improve flow and reduce residual stress.

• Gate Design: Use large gates and runners to minimize flow resistance and reduce molded-in stress.

• Regrind: Regrind can be used up to 20-25% with virgin material, provided it is clean and properly dried.

Related Products

• Explore PEI / Polyetherimide – Browse all ULTEM PEI resin options

• Explore Engineering Plastics – Browse all engineering plastic materials

• About Our Company – Learn more about our supply capabilities and quality assurance

Technical Documents

Request any document above by:

• Email: ruiqingchem@gmail.com

• Online form: Our contact page

We reply within one working business day. Please clearly state product (ULTEM 2110EPR) and document type you require.

FAQ

Q1: What is ULTEM 2110EPR and what is it used for?
A: ULTEM 2110EPR is a 10% glass fiber reinforced polyetherimide (PEI) resin manufactured by SABIC with enhanced electroplatability and high flow. It features 4x higher plating adhesion than standard ULTEM 2000 series and 30% better flow. It is widely used in automotive, aerospace, electrical/electronic components, medical devices, consumer goods, and industrial applications.

Q2: What does the “EPR” suffix in 2110EPR stand for?
A: The “EPR” suffix indicates Enhanced Electroplatability – the grade is specifically optimized for electroplating applications with 4x higher plating adhesion than standard ULTEM 2000 series.

Q3: What is the glass fiber content of ULTEM 2110EPR?
A: ULTEM 2110EPR contains 10% glass fiber reinforcement.

Q4: What is the glass transition temperature of ULTEM 2110EPR?
A: The glass transition temperature (Tg) is 217°C.

Q5: What is the density of ULTEM 2110EPR?
A: The density is 1.35 g/cm³.

Q6: Is ULTEM 2110EPR flame retardant?
A: Yes. ULTEM 2110EPR is inherently flame retardant with UL94 V-0 (0.4mm) and 5VA ratings.

Q7: What is the melt flow rate of ULTEM 2110EPR?
A: The Melt Flow Rate (MFR) is 11-19 g/10min at 337°C, 6.6kg.

Q8: How does ULTEM 2110EPR compare to standard ULTEM 2000 series?
A: ULTEM 2110EPR offers 30% better flow and 4x higher plating adhesion than standard ULTEM 2000 filled grades, making it easier to process and more suitable for electroplating applications.

Q9: Is there a sustainable/bio-based version of ULTEM 2110EPR?
A: Yes. An ISCC+ certified renewable bio-based version is available.

Q10: What processing methods can be used for ULTEM 2110EPR?
A: ULTEM 2110EPR can be processed by injection molding, extrusion, thermoforming, and blow molding.

Q11: What is the lead time for orders?
A: Regular orders ship within 7-10 working days after payment confirmation. Large-volume or urgent orders can be negotiated separately.

CTA (Call to Action)

Ready to order ULTEM 2110EPR?

To get a precise quotation and professional technical support, please share:

• Required quantity (kg)

• Destination port or delivery address

• Target application (automotive, aerospace, electrical, medical, etc.)

• Processing method (injection molding, extrusion, etc.)

• Color requirement (transparent amber or custom color)

• Bio-based preference (standard or ISCC+ certified renewable grade)

• Document requirement (TDS, SDS, UL, COA, etc.)

Sample Policy:

• Samples are for laboratory validation tests only, not for production use.

• Buyer bears international sample-shipping freight.

• If bulk-product performance deviates from sample reference, SABIC official TDS serves as the authoritative benchmark.

Take action now:

• 📧 Email Us – ruiqingchem@gmail.com

• 📝 Send Inquiry – Use our quick inquiry form

• 💬 Live Chat – Click the bottom-right chat widget to speak directly with our team

After-Sales Support

Disclaimer

DISCLAIMER: All technical data is referenced from original SABIC typical values for ULTEM 2110EPR. Our company acts as authorized distributor/trader rather than original manufacturer. Final performance depends on processing conditions, mold design, and part geometry. Buyers shall independently validate product suitability for individual applications. Our firm bears no liability for product failure caused by improper processing or improper usage. Always reference the latest SABIC official TDS of ULTEM 2110EPR as the definitive specification.