描述
3M Novec 72FL Engineered Fluid Aircraft Cold Cleaning Solvent
Type: Cold Cleaning Blend
Boiling Point: 45°C
Surface Tension: 16 dynes/cm
VOC Exempt: 80%
Packing: 5 kg / 20 kg drum
3M Novec 72FL Engineered Fluid is a nonflammable solvent blend specifically formulated for cold cleaning applications in aircraft maintenance. Designed for cleaning aircraft exterior surfaces, flaps, controls, connectors, electromechanical devices, relays, and circuit breakers, this clear, fast-drying, low-odor fluid removes light oils, greases, silicones, fluorinated oils, dust, and particulates. With 80% US EPA VOC exemption and compliance with Option 2 Aerospace NESHAP guidelines, Novec 72FL offers an environmentally responsible solution for aerospace cleaning without sacrificing performance.
Novec 72FL delivers exceptional material compatibility with most plastics including ABS, polycarbonate, acrylic, nylon, and PTFE, ensuring safe use on sensitive aircraft components. Its nonflammable nature (no flash point), low toxicity with an exposure guideline of 200 ppm, and low GWP of 71 make it a preferred choice for cold cleaning, flushing, wiping, and spray applications. This non-azeotropic blend is not designed for vapor degreasing but excels in cold cleaning applications where no rinsing and no residue are required.
Genuine 3M Imported Stock and Technical Support
We supply stable spot inventory of genuine 3M Novec 72FL engineered fluid. Official TDS, SDS, and batch COA documents are available for aircraft cold cleaning and aerospace maintenance applications.
Request Novec 72FL Quotation, TDS, SDS, and Sample
Complete SDS, COA, and technical documentation available
Novec 72FL is a non-azeotropic blend and is not designed for vapor degreasing. It is intended for cold cleaning applications only (flush, wipe, and spray).
Core Advantages of 3M Novec 72FL Engineered Fluid
- 80% US EPA VOC exempt — compliant with Option 2 Aerospace NESHAP guidelines
- Nonflammable — no flash point, safe for aircraft maintenance operations
- Excellent plastics compatibility — safe on ABS, polycarbonate, acrylic, nylon, and most engineered plastics
- Low GWP: 71 — environmentally sustainable alternative to HCFCs and high-GWP solvents
- Zero ozone depletion potential — environmentally responsible formulation
- Fast drying, low odor — improves maintenance efficiency and worker comfort
- No rinsing and no residues — eliminates secondary cleaning steps
- Non-conductive — dielectric strength >25 kV, safe for electronics cleaning
Main Applications
- Aircraft exterior cleaning — flaps, controls, connectors, electromechanical devices
- Circuit breaker cleaning — precision cleaning of electrical components
- Relay cleaning — cleaning of sensitive relay and switching equipment
- Light oil and grease removal — removes light oils, greases, silicones, and fluorinated oils
- Particulate and dust removal — removes dust, dirt, and particulates from equipment
- Hydraulic fluid cleaning — no effect on corrosion inhibiting compound (CIC) coatings
- General cold cleaning — flush, wipe, and spray applications
Full Technical Parameters
| Property | Typical Value | Test Method |
| Appearance | Clear colorless liquid | Visual |
| Boiling Point | 45°C | ASTM D1078 |
| Liquid Density (25°C) | 1.40 g/ml | ASTM D891 |
| Surface Tension | 16 dynes/cm | — |
| Vapor Pressure (25°C) | 330 mmHg | — |
| Evaporation Rate | 0.10 (relative to n-butyl acetate) | — |
| Dielectric Strength | >25 kV | — |
| Heat of Vaporization | 38 cal/g | — |
| Vapor Density | 7.9 | — |
| % Volatile | 100% | — |
| Ozone Depletion Potential | 0.00 | — |
| Global Warming Potential | 71 | — |
| Flash Point | None | — |
| VOC Exemption | 80% US EPA VOC Exempt | — |
| Exposure Guideline (8hr TWA) | 200 ppm | — |
| Shelf Life | 1 year | — |
Note: All listed figures are typical values and may vary by production batch. Complete independent qualification testing is required before mass production deployment.
Handling and Storage Recommendations
| Storage Rules | Store sealed original containers below 38°C in a dry, well-ventilated area away from heat sources and direct sunlight. |
| Shelf Life | 1 year from date of shipment when stored at room temperature in original unopened containers. |
| Pressure Warning | Contents may be under pressure if shipped at elevated temperatures. Open closure slowly to vent pressure. |
| Operation Protection | Maintain adequate ventilation. Wear nitrile protective gloves and anti-splash safety goggles during handling. |
Official Technical Documentation
| Document Type | Document Introduction | Document Request |
| TDS | 3M Novec 72FL original factory technical data sheet | Request TDS |
| SDS | Safety data sheet covering transport, storage, and handling guidelines | Request SDS |
| COA | Batch-specific certificate of analysis | Request COA |
Frequently Asked Questions
What is 3M Novec 72FL Engineered Fluid?
3M Novec 72FL is a nonflammable solvent blend designed for cold cleaning (flush, wipe, spray) of aircraft exterior surfaces, flaps, controls, connectors, electromechanical devices, relays, and circuit breakers. It removes light oils, greases, silicones, fluorinated oils, dust, and particulates.
Is Novec 72FL suitable for vapor degreasing?
No. Novec 72FL is a non-azeotropic blend and is not designed for vapor degreasing. Vapor concentrations would shift over time rendering it unacceptable for vapor degreasing. It is intended for cold cleaning applications only.
Is Novec 72FL a VOC?
Novec 72FL is 80% US EPA VOC Exempt and can be used on aircraft under the Option 2 Aerospace NESHAP guidelines, making it an environmentally compliant choice for aerospace cleaning.
What is the GWP of Novec 72FL?
Novec 72FL has a low global warming potential (GWP) of 71, significantly lower than many traditional solvents, with zero ozone depletion potential.
Is Novec 72FL compatible with plastics?
Yes. Novec 72FL has excellent compatibility with most plastics including ABS, polycarbonate (Lexan), acrylic (PMMA), nylon, polyethylene, polypropylene, PTFE, PVC, and many others, making it safe for use on aircraft components.
Is Novec 72FL flammable?
No. Novec 72FL is nonflammable with no flash point, providing safe operation in aircraft maintenance and cold cleaning applications.
What is the exposure guideline for Novec 72FL?
Novec 72FL has an 8-hour time-weighted average exposure guideline of 200 ppm, providing a wide margin of safety in intended cold cleaning applications.
Related 3M Novec Engineered Fluids
Compare 3M Novec engineered fluids for different cleaning and application requirements.
| Product Grade | Type | Boiling Point | GWP | Core Application |
| Novec 72FL | Cold cleaning blend | 45°C | 71 | Aircraft cold cleaning |
| Novec 71IPA | IPA-containing blend | 54.8°C | 310 | Precision cleaning |
| Novec 72DA | Azeotropic blend | 44°C | 435 | Medium-heavy degreasing, defluxing |
Get 3M Novec 72FL Bulk Pricing and Technical Support
We supply genuine 3M Novec 72FL engineered fluid for aircraft cold cleaning and aerospace maintenance applications. Contact us for bulk pricing, sample availability, technical documents, and application support.
Request Novec 72FL Technical Details
Disclaimer: All technical data on this page are for general guidance only and are not product specifications. Buyers must carry out independent trials and verify suitability before bulk ordering. Actual values may vary between production lots.
