描述
3M Novec 2202 Electronic Grade Coating Anti Smudge Easy Clean Glass
Type: Anti Smudge Easy Clean
Solvent: 7200DL
Water Contact Angle: >110°
Cure: 185°C / 60 min
Packing: 5KG / 20KG drum
3M Novec 2202 Electronic Grade Coating is a fluorinated polymer solution designed for anti-smudge and easy-clean protection on glass and glass-like surfaces. Diluted in 3M Novec 7200DL Engineered Fluid, this clear, low-viscosity coating dries to an ultra-thin (less than 10 nanometers), optically transparent film that provides excellent repellency to oils, dirt, grime, and water. With a water contact angle greater than 110° and hexadecane contact angle greater than 60°, Novec 2202 delivers superior hydrophobic and oleophobic performance for touchscreens, displays, and mobile electronic devices.
Novec 2202 requires thermal curing at 185°C for 60 minutes to achieve maximum durability, chemical resistance, and abrasion resistance. The cured coating provides durable anti-smudge properties through anti-wetting and anti-stiction mechanisms, improves lubricious feel by reducing stick-slip friction, and maintains stable contact angles even after steel wool abrasion. It adheres excellently to glass and glass-like surfaces without altering surface appearance. Environmentally, it is nonflammable, non-ozone-depleting, low in toxicity, low GWP, RoHS compliant, and VOC exempt (per U.S. EPA). With a 2-year shelf life and preferred spray application (automated equipment recommended), Novec 2202 is ideal for consumer electronics, automotive displays, and high-touch glass surfaces.
Genuine 3M Imported Stock and Technical Support
We supply stable spot inventory of genuine 3M Novec 2202 electronic grade coating. Official TDS, SDS, and batch COA documents are available for anti-smudge, easy-clean, and display protection applications.
Request Novec 2202 Coating Quotation, TDS, SDS, and Sample
Complete SDS, COA, and technical documentation available
Core Advantages of 3M Novec 2202 Electronic Grade Coating
- Superior anti-smudge performance — water contact angle >110° for excellent oil, dirt, and water repellency
- Ultra-thin optical clarity — <10 nm coating with no impact on surface appearance or touch sensitivity
- Durable and abrasion-resistant — stable contact angles even after steel wool abrasion
- High temperature cure: 185°C for 60 minutes — provides maximum durability and chemical resistance
- Improved lubricious feel — reduces stick-slip friction for smoother touch experience
- 7200DL solvent system — higher boiling point (76°C) for optimized spray application
- VOC exempt (U.S. EPA) — environmentally compliant for electronics manufacturing
- Excellent adhesion to glass and glass-like surfaces — long-lasting protection for displays and touchscreens
Main Applications
- Touchscreen displays — anti-smudge and easy-clean protection for smartphones, tablets, and laptops
- Automotive displays — durable easy-clean coatings for in-vehicle touchscreens and instrument panels
- Flat panel displays — optical clarity coating for LCD, OLED, and other display technologies
- Mobile electronic devices — protection for handheld electronics and wearables
- Anti-wetting and anti-stiction — for glass surfaces requiring low surface energy
- Architectural glass — easy-clean protection for building and automotive glass applications
Full Technical Parameters
| Property | Typical Value | Test Method |
| Coating Type | Fluorinated polymer in HFE solvent | — |
| Solids Content | 0.2 wt% | — |
| Solvent System | 3M Novec 7200DL | — |
| Appearance (Solution) | Clear colorless liquid | Visual |
| Coating Appearance | Transparent, colorless | Visual |
| Density | 1.41 g/ml | — |
| Viscosity | 0.61 cP | — |
| Boiling Point (Solvent) | 76°C | ASTM D1120-94 |
| Flash Point | None | Closed cup |
| Coating Thickness | <10 nm | — |
| Water Contact Angle (static) | >110° | Goniometer |
| Hexadecane Contact Angle | >60° | Goniometer |
| Cure Conditions | 185°C for 60 minutes | — |
| Thermal Stability (cured film) | Up to 175°C for 24 hours | — |
| VOC Status | Exempt (U.S. EPA) | — |
| RoHS | Compliant | — |
| Shelf Life | 2 years | — |
Note: All listed figures are typical values and may vary by production batch. Complete independent qualification testing is required before mass production deployment.
3M does not recommend open, manual spraying of this material. Use of automated/robotic equipment that is enclosed and vented is highly suggested. Contact 3M for equipment vendor suggestions. Do not spray without proper ventilation and PPE.
Handling and Storage Recommendations
| Storage Conditions | Store at 16-27°C (60-80°F) and <60% R.H. in original unopened containers. |
| Shelf Life | 2 years from date of manufacture when stored as recommended. |
| Application Precautions | Surfaces must be clean and dry before application. Thermal cure at 185°C for 60 minutes is recommended for durability. |
| Thermal Limits | Do not heat solution above 150°C; dry film should not exceed 225°C to avoid decomposition. |
| Operation Protection | Use with adequate ventilation and appropriate PPE. Read SDS before use. Automated/robotic application is recommended. |
Official Technical Documentation
| Document Type | Document Introduction | Document Request |
| TDS | 3M Novec 2202 original factory technical data sheet | Request TDS |
| SDS | Safety data sheet covering transport, storage, and handling guidelines | Request SDS |
| COA | Batch-specific certificate of analysis with solids and purity specifications | Request COA |
Frequently Asked Questions
What is 3M Novec 2202 Electronic Grade Coating?
3M Novec 2202 is a fluorinated polymer coating designed for anti smudge and easy clean protection on glass and glass-like surfaces including displays, touchscreens, and mobile electronic devices. It provides durable hydrophobic and oleophobic properties with optical clarity.
How does Novec 2202 differ from Novec 1720?
Novec 2202 uses 7200DL solvent (vs 7100DL), has higher boiling point (76°C vs 61°C), requires higher cure temperature (185°C vs 135°C) for 60 minutes, and provides higher water contact angle (>110° vs 105°) for enhanced easy-clean performance.
Does Novec 2202 require curing?
Yes. Novec 2202 air dries in seconds but requires thermal curing at 185°C for 60 minutes to achieve optimal durability, chemical resistance, and abrasion resistance. 3M technical service can recommend alternative curing conditions.
What is the coating thickness of Novec 2202?
Novec 2202 provides an ultra-thin coating of less than 10 nanometers, which is optically transparent and does not alter surface appearance.
What is the shelf life of Novec 2202 coating?
Novec 2202 has a shelf life of 2 years from date of manufacture when stored in original unopened container at 16-27°C and <60% RH.
Is Novec 2202 environmentally friendly?
Yes. Novec 2202 is nonflammable, non-ozone-depleting, low in toxicity, low GWP, RoHS compliant, and VOC exempt per U.S. EPA.
Related 3M Novec Products
Compare 3M Novec electronic grade coatings for different surface protection requirements.
| Product | Solvent | Cure Temperature | Water Contact Angle | Best For |
| Novec 2202 | 7200DL | 185°C / 60 min | >110° | Glass anti-smudge, easy clean |
| Novec 1720 | 7100DL | 135°C / 10-15 min | 105° | Fluorosilane anti-smudge |
| Novec 1700 | 7100DL | No cure | 105° | PCB moisture protection |
Get 3M Novec 2202 Coating Bulk Pricing and Technical Support
We supply genuine 3M Novec 2202 electronic grade coating for anti-smudge, easy-clean, and display protection applications. Contact us for bulk pricing, sample availability, technical documents, and application support.
Request Novec 2202 Coating Technical Details
Disclaimer: All technical data on this page are for general guidance only and are not product specifications. Buyers must carry out independent trials and verify suitability before bulk ordering. Actual values may vary between production lots.
