描述
NORYL SE100X Resin is an unfilled, non-reinforced blend of polyphenylene ether (PPE) and high impact polystyrene (HIPS), manufactured by SABIC. This injection moldable grade contains non-brominated, non-chlorinated halogen-free flame retardant and carries a UL94 flame rating of V-0 at 6mm and V-1 at 1.5mm, along with a UL746C Outdoor Suitability rating of F1.
NORYL SE100X Resin offers strong electrical performance, low moisture absorption, good flow, dimensional stability, and hydrolytic stability. It exhibits high heat resistance, high dielectric strength, high stiffness, good creep resistance, good chemical resistance, and low specific gravity. This material is targeted for indoor and outdoor electrical enclosures, wall plates, sockets, switches, and connector applications.
All colors are customizable via SABIC’s ColorXpress tool. Physical property data is determined using test methods established by UL, the globally recognized safety certification organization.
For more NORYL grades and technical information, please visit our PPO/PPE product page.
Key Features of NORYL SE100X Resin
-
Halogen-Free Flame Retardant – Non-brominated, non-chlorinated flame retardant system
-
UL94 V-0 & V-1 Rated – V-0 at 6mm; V-1 at 1.5mm
-
UL746C F1 Outdoor Suitability – Suitable for outdoor exposure with UV and weather resistance
-
Strong Electrical Performance – Volume resistivity of 3.1×10¹⁶ Ω.cm; surface resistivity >1×10¹⁵ Ω
-
High Heat Resistance – HDT of 102°C at 0.45 MPa; RTI Electrical of 95°C
-
High Stiffness – Flexural modulus of 2,300 MPa
-
Good Mechanical Strength – Tensile strength of 57 MPa (yield) / 46 MPa (break)
-
Good Flow – Excellent moldability for complex part geometries
-
Low Moisture Absorption – Maintains properties in humid environments
-
Dimensional Stability – Low warpage and low mold shrinkage (0.5–0.7%)
-
Hydrolytic Stability – Resists degradation in wet environments
-
Creep Resistant – Maintains dimensional integrity under sustained load
-
UV/Weather Resistant – Suitable for outdoor applications
-
RoHS Compliant – Meets global environmental standards
-
Injection Moldable – Suitable for standard injection molding processes
Typical Applications for NORYL SE100X Resin
| Industry | Typical Components & Considerations |
|---|---|
| Electrical & Electronics | Enclosures, housings, wall plates, sockets, switches, connectors – UL94 V-0/V-1, UL746C F1, strong electrical performance |
| Building & Construction | Building accessories, circuit protection, wiring devices – flame retardant, dimensional stability |
| Home & Commercial Appliances | Appliance housings and components – heat resistance, flame retardancy |
| Energy Management | Power management components – UL94 V-0, electrical performance |
| Lighting | Non-LED lighting components – heat resistance, dimensional stability |
| HVAC | Furnace/heater components – heat resistance, flame retardancy |
| Data Transfer | Data transfer and communication equipment – electrical performance, dimensional stability |
| Drones | Drone components – lightweight, flame retardant, dimensional stability |
Typical Properties of NORYL SE100X Resin
| Property | Value | Test Method |
|---|---|---|
| Physical | ||
| Specific Gravity | 1.10 | ASTM D792 |
| Mold Shrinkage, Flow (3.2mm) | 0.5 – 0.7% | SABIC Method |
| Mold Shrinkage, X-Flow (3.2mm) | 0.5 – 0.7% | SABIC Method |
| Mechanical (ASTM) | ||
| Tensile Stress, Yield (Type I, 50 mm/min) | 57 MPa | ASTM D638 |
| Tensile Stress, Break (Type I, 50 mm/min) | 46 MPa | ASTM D638 |
| Tensile Strain, Yield (Type I, 50 mm/min) | 6.5% | ASTM D638 |
| Tensile Strain, Break (Type I, 50 mm/min) | 25% | ASTM D638 |
| Flexural Modulus (2.6 mm/min, 100 mm span) | 2,300 MPa | ASTM D790 |
| Flexural Stress, Yield (2.6 mm/min, 100 mm span) | 82 MPa | ASTM D790 |
| Impact (ASTM) | ||
| Notched Izod Impact (23°C) | 256 J/m | ASTM D256 |
| Thermal (ASTM) | ||
| HDT, 0.45 MPa (66 psi, 6.4mm, unannealed) | 102°C | ASTM D648 |
| HDT, 1.82 MPa (264 psi, 6.4mm, unannealed) | 92°C | ASTM D648 |
| RTI Electrical | 95°C | UL 746B |
| RTI Mechanical with Impact | 80°C | UL 746B |
| RTI Mechanical without Impact | 95°C | UL 746B |
| Electrical (ASTM) | ||
| Volume Resistivity | 3.1×10¹⁶ Ω.cm | ASTM D257 |
| Surface Resistivity | >1×10¹⁵ Ω | ASTM D257 |
| Dielectric Strength (in oil, 3.2mm) | 17.9 kV/mm | ASTM D149 |
| Relative Permittivity (50/60 Hz) | 2.66 | ASTM D150 |
| Relative Permittivity (1 MHz) | 2.57 | ASTM D150 |
| Dissipation Factor (50/60 Hz) | 0.006 | ASTM D150 |
| Dissipation Factor (1 MHz) | 0.0026 | ASTM D150 |
| Comparative Tracking Index (CTI) | PLC 1 | UL 746A |
| High Amp Arc Ignition (HAI) | PLC 0 (min. 1.5mm) | UL 746A |
| High Voltage Arc Track Rate (HVTR) | PLC 4 | UL 746A |
| Flammability | ||
| Flame Rating (1.5mm) | V-1 | UL 94 |
| Flame Rating (6.0mm) | V-0 | UL 94 |
| UL746C Outdoor Suitability | F1 | UL 746C |
| UL Yellow Card | E207780 / E121562 | UL |
Important Notes on Typical Data:
Values listed are typical and sourced from manufacturer data sheets. They do not constitute binding product specification.
Batch-to-batch deviations may exist. For critical applications, validate performance with batch-specific COA certificate.
Final performance depends on processing conditions and part design.
Manufacturer official TDS shall serve as definitive technical reference. Request the latest official TDS from our sales team.
Processing Guidelines for NORYL SE100X Resin
| Step | Process |
|---|---|
| Processing Method | Injection molding |
| Drying Temperature | 75 – 80°C |
| Drying Time | 3 – 4 hours |
| Drying Time (Cumulative) | 8 hours |
| Suggested Max Moisture | Refer to full TDS |
| Rear Temperature | Refer to full TDS |
| Middle Temperature | Refer to full TDS |
| Front Temperature | Refer to full TDS |
| Nozzle Temperature | Refer to full TDS |
| Melt Temperature | Refer to full TDS |
| Mold Temperature | Refer to full TDS |
| Back Pressure | Refer to full TDS |
| Screw Speed | Refer to full TDS |
| Shot Size | Refer to full TDS |
| Storage | Store in original, sealed packaging in a cool, dry place away from direct sunlight |
Critical Processing Warnings:
Injection Molding: This grade is specifically designed for injection molding.
Drying: Proper drying is critical to prevent hydrolysis and achieve optimal mechanical properties. Dry at 75–80°C for 3–4 hours (cumulative 8 hours).
UL Compliance: This grade carries UL94 V-0 (6mm) and V-1 (1.5mm) ratings. Ensure processing conditions maintain compliance.
UL746C F1 Rating: This grade is UL746C F1 rated for outdoor suitability. Ensure processing conditions maintain compliance.
Storage: Store in original, sealed packaging in a cool, dry place away from direct sunlight.
Related Products for NORYL SE100X Resin
Explore Engineering Plastics – Browse all engineering plastic materials
About Our Company – Learn more about our supply capabilities and quality assurance
Technical Documents for NORYL SE100X Resin
| Document Type | Description & Source |
|---|---|
| Manufacturer Official TDS | Complete physical, thermal, and mechanical properties of NORYL SE100X |
| Manufacturer Official SDS | GHS-compliant safety documentation |
| COA (Certificate of Analysis) | Batch-specific quality certification |
| UL Yellow Card | E207780 / E121562 – UL safety certification |
Request any document above by:
Email: ruiqingchem@gmail.com
Online form: Our contact page
We reply within one working business day. Please clearly state product (NORYL SE100X) and document type you require.
FAQ about NORYL SE100X Resin
Q1: What is NORYL SE100X?
A: This grade is an unfilled, halogen-free flame retardant blend of PPE and HIPS from SABIC. It is an injection moldable grade with UL94 V-0/V-1 ratings, UL746C F1 outdoor suitability, strong electrical performance, low moisture absorption, good flow, dimensional stability, and hydrolytic stability.
Q2: What are the key features of this grade?
A: Halogen-free flame retardancy (UL94 V-0 at 6mm & V-1 at 1.5mm), UL746C F1 outdoor rating, strong electrical performance (volume resistivity 3.1×10¹⁶ Ω.cm), high stiffness (flexural modulus 2,300 MPa), good flow, low moisture absorption, dimensional stability, hydrolytic stability, creep resistance, UV/weather resistance, and low specific gravity.
Q3: What are the typical applications for this grade?
A: Indoor and outdoor electrical enclosures, wall plates, sockets, switches, connectors, building accessories, circuit protection, wiring devices, home and commercial appliances, power management components, lighting, HVAC components, and drone components.
Q4: What are the flame ratings of this grade?
A: UL94 V-0 at 6mm thickness and V-1 at 1.5mm thickness.
Q5: Is this grade suitable for outdoor use?
A: Yes, this grade carries a UL746C outdoor suitability rating of F1.
Q6: Is this grade halogen-free?
A: Yes, it contains non-brominated, non-chlorinated flame retardant.
Q7: What is the recommended processing method for this grade?
A: Injection molding. Dry at 75–80°C for 3–4 hours (cumulative 8 hours).
Q8: What is the UL Yellow Card number for this grade?
A: E207780 / E121562.
Q9: What regions is this grade available in?
A: Americas, Asia Pacific, and Europe.
CTA (Call to Action)
Ready to order NORYL SE100X?
To get a precise quotation and professional technical support, please share:
-
Required quantity (kg)
-
Destination port or delivery address
-
Target application (electrical enclosures, connectors, switches, wall plates, etc.)
-
Color requirement (all colors customizable via ColorXpress)
-
Document requirement (TDS, SDS, COA, UL docs, etc.)
Sample Policy:
-
Samples are for laboratory validation tests only, not for production use.
-
Buyer bears international sample-shipping freight.
-
If bulk-product performance deviates from sample reference, manufacturer official TDS serves as the authoritative benchmark.
Take action now:
-
📧 Email Us – ruiqingchem@gmail.com
-
📝 Send Inquiry – Use our quick inquiry form
-
💬 Live Chat – Click the bottom-right chat widget to speak directly with our team
After-Sales Support
| Service | Details |
|---|---|
| Quality Inspection Period | All quality-related claims must be submitted within 7 working days after delivery, supported by test data and photographic evidence. |
| Return / Exchange Policy | Confirmed product defects caused by our side trigger replacement or refund. Terms and conditions apply. |
| Logistics Damage | Report shipping damage directly to carrier immediately upon goods receipt. We assist with claim-document preparation. |
| Technical Support | Remote technical guidance available. On-site troubleshooting can be arranged upon special request. |
| Export Documentation | We supply commercial invoice, packing list, bill of lading, COA, and additional compliance certificates on request. |
Disclaimer
DISCLAIMER: All technical data is referenced from original manufacturer typical values for NORYL SE100X. Our company acts as authorized distributor/trader rather than original manufacturer. Final performance depends on processing conditions and part design. Buyers shall independently validate product suitability for individual applications. Our firm bears no liability for product failure caused by improper processing or improper usage. Always reference the latest manufacturer official TDS of NORYL SE100X as the definitive specification.
