描述
NORYL FE1520PW Resin is a 20% glass fiber reinforced blend of polyphenylene ether (PPE) and crystal clear polystyrene (ccPS), manufactured by SABIC. This injection moldable grade is FC EU and FDA food contact compliant, and carries NSF/ANSI 61, ACS, WRAS, KTW, and W270 listings for global potable water use.
NORYL FE1520PW Resin exhibits excellent long-term hydrolytic stability, very low moisture absorption, heat and hot water resistance, low creep sensitivity, and good stiffness. It is an excellent candidate for a variety of water management applications including pump housings, impellers, shower/faucet components, membrane housings, and valves. This product does not contain PFAS intentionally added during the manufacturing process. Physical property data is determined using test methods established by ASTM International and ISO, the globally recognized standards organizations.
Restrictions may apply for applications involving fatty foods. Please review the food contact declaration for details. Potable water listings are color dependent.
For more NORYL grades and technical information, please visit our PPO/PPE product page.
Key Features of NORYL FE1520PW Resin
-
20% Glass Fiber Reinforced – Enhanced stiffness and dimensional stability
-
FDA Food Contact Compliant – FC EU and FDA compliant for food contact applications
-
NSF/ANSI 61 Listed – Certified for potable water use
-
ACS, WRAS, KTW & W270 Certified – Global potable water certifications
-
Excellent Long-Term Hydrolytic Stability – Maintains properties in hot water and wet environments
-
Very Low Moisture Absorption – 0.06% moisture absorption at equilibrium (23°C/50% RH)
-
Heat & Hot Water Resistance – Suitable for elevated temperature water applications
-
Low Creep Sensitivity – Maintains dimensional integrity under sustained load
-
Low Warpage – Minimal deformation for precise components
-
Good Stiffness – Flexural modulus of 6970 MPa (ASTM) / 6040 MPa (ISO)
-
Amorphous – Low shrinkage characteristics
-
No PFAS Intentionally Added – Compliant with environmental regulations
Typical Applications for NORYL FE1520PW Resin
| Industry | Typical Components & Considerations |
|---|---|
| Water Management | Pump housings, impellers, shower/faucet components, membrane housings, valves – NSF/ANSI 61, ACS, WRAS, KTW, W270 certified for potable water |
| Building & Construction | Plumbing components, pipe fittings – hydrolytic stability, hot water resistance |
| Food & Beverage | Food processing equipment, coffee makers – FDA food contact compliant |
| Home Appliances | Appliance components, water handling systems – heat resistance, low moisture absorption |
| Consumer Goods | Personal and professional hygiene products – FDA compliant |
| Mass Transportation | Specialty vehicles – dimensional stability, stiffness |
| Outdoor & Lawn | Outdoor equipment, lawn and landscape applications – weather resistance |
Typical Properties of NORYL FE1520PW Resin
| Property | Value | Test Method |
|---|---|---|
| Density | 1.24 g/cm³ | ISO 1183 |
| Moisture Absorption (Equilibrium, 23°C/50% RH) | 0.06% | ASTM D570 |
| Water Absorption at Saturation | 0.20% | ISO 62-1 |
| Linear Mold Shrinkage, Flow (3.2mm) | 0.2 – 0.4% | SABIC Method |
| Melt Volume Rate (280°C/10.0kg) | 22 cm³/10min | ISO 1133 |
| Tensile Modulus | 7100 MPa (ASTM) / 7170 MPa (ISO) | ASTM D638 / ISO 527 |
| Tensile Stress, Break | 119 MPa | ASTM D638 / ISO 527 |
| Tensile Strain, Break | 2.6% | ASTM D638 / ISO 527 |
| Flexural Modulus | 6970 MPa (ASTM) / 6040 MPa (ISO) | ASTM D790 / ISO 178 |
| Flexural Stress, Break | 175 MPa (ASTM) / 165 MPa (ISO) | ASTM D790 / ISO 178 |
| Notched Izod Impact (23°C) | 65 J/m | ASTM D256 |
| Notched Izod Impact (-30°C) | 45 J/m | ASTM D256 |
| Unnotched Izod Impact (23°C) | 400 J/m | ASTM D4812 |
| Unnotched Izod Impact (-30°C) | 395 J/m | ASTM D4812 |
| Vicat Softening Temperature (A/50) | 150°C | ISO 306 |
| Deflection Temperature @ 0.46 MPa (66 psi) | 139°C | ISO 75-Be |
| HDT, 1.82 MPa (3.2mm) | Refer to full TDS | ASTM A648 |
Important Notes on Typical Data:
Values listed are typical and sourced from manufacturer data sheets. They do not constitute binding product specification.
Batch-to-batch deviations may exist. For critical applications, validate performance with batch-specific COA certificate.
Final performance depends on processing conditions and part design.
Manufacturer official TDS shall serve as definitive technical reference. Request the latest official TDS from our sales team.
Processing Guidelines for NORYL FE1520PW Resin
| Step | Process |
|---|---|
| Drying | Refer to full TDS for specific drying conditions |
| Maximum Moisture Content | < 0.02% |
| Melt Temperature | 290 – 320°C |
| Mold Temperature | 80 – 120°C |
| Process | Injection molding |
| Storage | Store in original, sealed packaging in a cool, dry place away from direct sunlight |
Critical Processing Warnings:
Drying: Proper drying is critical to prevent hydrolysis and achieve optimal mechanical properties.
Injection Molding: NORYL FE1520PW is specifically designed for injection molding.
FDA Compliance: This grade is FDA food contact compliant. Restrictions may apply for fatty food applications.
Potable Water Certification: NSF/ANSI 61, ACS, WRAS, KTW, and W270 listings are color dependent.
Storage: Store in original, sealed packaging in a cool, dry place away from direct sunlight.
Related Products
Explore Engineering Plastics – Browse all engineering plastic materials
About Our Company – Learn more about our supply capabilities and quality assurance
Technical Documents for NORYL FE1520PW Resin
| Document Type | Description & Source |
|---|---|
| Manufacturer Official TDS | Complete physical, thermal, and mechanical properties of NORYL FE1520PW |
| Manufacturer Official SDS | GHS-compliant safety documentation |
| COA (Certificate of Analysis) | Batch-specific quality certification |
| FDA Compliance Documentation | Food-contact compliance certificates |
| NSF/ANSI 61 Certification | Potable water certification documentation |
| UL Yellow Card | UL safety certification |
Request any document above by:
Email: ruiqingchem@gmail.com
Online form: Our contact page
We reply within one working business day. Please clearly state product (NORYL FE1520PW) and document type you require.
FAQ about NORYL FE1520PW Resin
Q1: What is NORYL FE1520PW?
A: NORYL FE1520PW is a 20% glass fiber reinforced blend of polyphenylene ether (PPE) and crystal clear polystyrene (ccPS) from SABIC. It is an injection moldable grade with FDA food contact compliance and NSF/ANSI 61 certification for potable water applications.
Q2: What are the key features of NORYL FE1520PW?
A: It offers excellent long-term hydrolytic stability, very low moisture absorption (0.06%), heat and hot water resistance, low creep sensitivity, low warpage, good stiffness (flexural modulus up to 6970 MPa), and resistance against chlorine at elevated temperatures.
Q3: What are the typical applications for NORYL FE1520PW?
A: Typical applications include pump housings, impellers, shower/faucet components, membrane housings, valves, plumbing components, water meters, and food processing equipment.
Q4: Is NORYL FE1520PW FDA compliant?
A: Yes, NORYL FE1520PW is FC EU and FDA food contact compliant. Restrictions may apply for fatty food applications.
Q5: Is NORYL FE1520PW certified for potable water?
A: Yes, it carries NSF/ANSI 61, ACS, WRAS, KTW, and W270 listings for global potable water use. Listings are color dependent.
Q6: What is the recommended processing method for NORYL FE1520PW?
A: NORYL FE1520PW is designed for injection molding.
Q7: What is the recommended melt temperature for NORYL FE1520PW?
A: 290 – 320°C.
Q8: What is the mold temperature range for NORYL FE1520PW?
A: 80 – 120°C.
Q9: What is the Vicat softening temperature of NORYL FE1520PW?
A: 150°C (Rate A/50).
Q10: What is the lead time for orders?
A: Regular orders ship within 7-10 working days after payment confirmation. Large-volume orders can be negotiated separately.
CTA (Call to Action)
Ready to order NORYL FE1520PW?
To get a precise quotation and professional technical support, please share:
-
Required quantity (kg)
-
Destination port or delivery address
-
Target application (water management, pump housings, valves, food contact, etc.)
-
Color requirement (potable water listings are color dependent)
-
Document requirement (TDS, SDS, COA, FDA/NSF docs, etc.)
Sample Policy:
-
Samples are for laboratory validation tests only, not for production use.
-
Buyer bears international sample-shipping freight.
-
If bulk-product performance deviates from sample reference, manufacturer official TDS serves as the authoritative benchmark.
Take action now:
-
📧 Email Us – ruiqingchem@gmail.com
-
📝 Send Inquiry – Use our quick inquiry form
-
💬 Live Chat – Click the bottom-right chat widget to speak directly with our team
After-Sales Support
| Service | Details |
|---|---|
| Quality Inspection Period | All quality-related claims must be submitted within 7 working days after delivery, supported by test data and photographic evidence. |
| Return / Exchange Policy | Confirmed product defects caused by our side trigger replacement or refund. Terms and conditions apply. |
| Logistics Damage | Report shipping damage directly to carrier immediately upon goods receipt. We assist with claim-document preparation. |
| Technical Support | Remote technical guidance available. On-site troubleshooting can be arranged upon special request. |
| Export Documentation | We supply commercial invoice, packing list, bill of lading, COA, and additional compliance certificates on request. |
Disclaimer
DISCLAIMER: All technical data is referenced from original manufacturer typical values for NORYL FE1520PW. Our company acts as authorized distributor/trader rather than original manufacturer. Final performance depends on processing conditions and part design. Buyers shall independently validate product suitability for individual applications. Our firm bears no liability for product failure caused by improper processing or improper usage. Always reference the latest manufacturer official TDS of NORYL FE1520PW as the definitive specification.
