Hostaform XGC10 EF XAP2 – 10% Glass Reinforced Low Emission POM-C

描述

Hostaform XGC10 EF XAP2 is an easy flowing, 10% glass fiber reinforced POM‑C (Polyoxymethylene Copolymer) injection molding grade, genuinely manufactured by Celanese and imported as original product. As an authorized distributor and trader, we supply genuine material with full traceability and direct access to official Celanese technical documentation.

This unfilled acetal copolymer is reinforced with approximately 10% short glass fibers, delivering significantly enhanced strength, stiffness, and heat resistance compared to unreinforced POM grades. The “EF” designation indicates Easy Flow, providing excellent flowability for injection molding of complex geometries. The “XAP2” suffix denotes Celanese’s low emission technology, with emissions according to VDA 275 <5 ppm.

Hostaform XGC10 EF XAP2 is part of Celanese’s XGC series, which offers an enhanced balance of strength, stiffness, and toughness at low temperatures. Compared to traditional glass fiber reinforced grades such as Hostaform C 9021 GV1/10, the XGC series delivers higher strength and lower emissions, making it a “best-in-class” glass fiber reinforced copolymer. With regular stock availability, we support both trial orders and large‑volume bulk shipments for automotive, industrial, and structural applications.

Key Features of Hostaform XGC10 EF XAP2

• 10% Glass Fiber Reinforcement – Provides significantly increased tensile modulus of 4900 MPa, tensile stress at break of 110 MPa, and enhanced dimensional stability

• Easy Flow / High Flowability – MVR of 12.5 cm³/10min (190°C/2.16kg) – easy flowing grade for injection molding of complex parts

• Low Emission Technology – XAP2 low emission technology; emissions according to VDA 275 <5 ppm

• High Stiffness & Strength – Tensile modulus of 4900 MPa and flexural modulus of 4700 MPa – among the highest in glass reinforced POM grades

• Excellent Heat Resistance – Heat deflection temperature of 154°C at 1.8 MPa, enabling use in high-temperature environments

• Good Impact Resistance – Charpy notched impact strength of 6.5 kJ/m² at 23°C and -30°C

• Low Moisture Absorption – Molding shrinkage: parallel 1.0%, normal 1.1%

• Automotive Flammability Compliant – FMVSS Class B with burning rate 81 mm/min for 1 mm thickness

• OEM Approved – Special part approval for VW Group, used in Porsche/Hella climate control unit components

• Heavy‑Metal Free – Environmentally friendly formulation

• Contains Release Agent – Facilitates easy demolding during processing

Typical Applications for Hostaform XGC10 EF XAP2

Explore our full range of engineering plastics solutions for more industry‑specific case studies. See also our full POM product portfolio .

Material Advantages of Hostaform XGC10 EF XAP2

What makes Hostaform XGC10 EF XAP2 the preferred material for high-performance structural and automotive applications? Below are its core practical advantages:

Best-in-Class Glass Fiber Reinforced Performance
Hostaform XGC10 EF XAP2 is part of Celanese’s XGC series, which offers an enhanced balance of strength, stiffness, and toughness at low temperatures. Compared to traditional glass fiber reinforced grades such as Hostaform C 9021 GV1/10, the XGC series delivers higher strength and lower emissions, making it a “best-in-class” glass fiber reinforced copolymer.

High Stiffness & Strength for Structural Applications
With a tensile modulus of 4900 MPa and tensile stress at break of 110 MPa, this grade delivers exceptional structural performance for load-bearing applications. The glass fiber reinforcement provides significantly increased stiffness and dimensional stability over unreinforced POM grades.

Easy Flow for Complex Part Geometries
The “EF” (Easy Flow) designation indicates excellent flowability with an MVR of 12.5 cm³/10min. This enables efficient filling of complex, thin‑wall geometries while maintaining high mechanical properties.

Low Emission Technology for Automotive Interiors
The “XAP2” designation indicates Celanese’s proprietary low emission technology, with emissions according to VDA 275 <5 ppm. This makes it especially suitable for automotive interior applications with strict cabin air quality requirements. Combined with its use in climate control units, this grade is ideal for passenger compartment applications.

Excellent Heat Resistance
Heat deflection temperature of 154°C at 1.8 MPa ensures thermal stability during processing and service in elevated temperature environments.

Automotive OEM Approved
Hostaform XGC10 EF XAP2 has special part approval for VW Group and is used in Porsche / Hella / Ditter Plastik climate control unit components, demonstrating its proven performance in demanding automotive applications.

Good Impact Resistance
Notched impact strength of 6.5 kJ/m² at 23°C and -30°C ensures reliable performance across a wide temperature range.

Low & Balanced Shrinkage
Molding shrinkage of 1.0% parallel and 1.1% normal ensures consistent part dimensions and tight tolerances.

Automotive Flammability Compliant
FMVSS Class B with burning rate 81 mm/min for 1 mm thickness.

Heavy‑Metal Free
Environmentally friendly, heavy‑metal‑free formulation.

Batch‑to‑Batch Consistency
Celanese manufactures this grade under strict ISO quality standards for consistent property across shipments.

Reliable Supply
We maintain active inventory and stable supply chains for Hostaform XGC10 EF XAP2. For more supply‑chain details, visit our company background page .

Typical Properties (ISO Standards)

Typical properties of Hostaform XGC10 EF XAP2 measured to ISO standards are listed below:

Important Notes on Typical Data:

1. Values listed are typical and sourced from Celanese official data sheets for Hostaform XGC10 EF XAP2. They do not constitute binding product specification.

2. Batch‑to‑batch deviations may exist. For critical applications, validate performance with batch‑specific COA certificate.

3. Final part performance depends on component design, processing parameters and end‑use environment.

4. Celanese original TDS shall serve as definitive technical reference. Request the latest official Hostaform XGC10 EF XAP2 TDS from our sales team.

Processing Guidelines (Injection Molding)

Recommended processing parameters for Hostaform XGC10 EF XAP2:

Critical Processing Warnings for Hostaform XGC10 EF XAP2:

• Easy Flow Processing: With MVR of 12.5 cm³/10min, Hostaform XGC10 EF XAP2 is an easy flowing grade designed for efficient filling of complex part geometries. Adjust cycle parameters to maximize throughput while maintaining part quality.

• Drying: Drying is not required for this grade. If material has come into contact with moisture through improper storage, drying at 100°C for 3-4 hours is recommended.

• Low Emission Property: To maintain XAP2 low emission characteristics (VDA 275 <5 ppm), avoid contamination and ensure proper processing conditions.

• Fiber Breakage: Avoid excessive screw speed or back pressure, as this can break glass fibers and reduce mechanical properties. Recommended screw tangential speed ≤0.3 m/s.

• Thermal Degradation Risk: POM‑based material can decompose under excessive heat and release formaldehyde vapors. Guarantee sufficient ventilation; avoid overly long barrel residence times. Max. melt temperature 210°C.

• Material Purity Requirement: Strictly prevent cross‑contamination with other polymer grades. Contamination will degrade the glass-filled, low emission, and high-performance properties.

• Regrind / Recycled Material Notice: We do not recommend adding regrind for this specialty grade. Reprocessing may compromise the glass fiber reinforcement, mechanical properties, and XAP2 low emission characteristics. If regrind usage is mandatory, keep percentage below 10% and complete pre‑validation testing first.

• Storage Guidance: Store pellets in cool, dry conditions; keep sealed in original factory packaging whenever possible to maintain low emission characteristics.

Related Products

• Explore Our Full POM Product Portfolio – Browse all POM copolymer and homopolymer grades we supply

• Glass Fiber Reinforced POM Grades – Discover other glass fiber reinforced grades for high-performance applications

• Low Emission POM (XAP2 Series) – Discover low VOC, low odor grades for automotive interior applications

• Hostaform XGC25 – View the 25% glass fiber reinforced version for maximum stiffness

• POM for Automotive Applications – View grades specifically suited for automotive interior and structural components

• About Our Company – Learn more about our supply capabilities and quality assurance

Technical Documents

We provide complete supporting documentation for material selection and compliance verification.

Request any document above by:

• Email: ruiqingchem@gmail.com

• Online form: Our contact page

We reply within one working business day. Please clearly state material grade (Hostaform XGC10 EF XAP2) and document type you require.

External Reference

For further authoritative information, please refer to the official Celanese Hostaform product portal and the latest material datasheets for Hostaform XGC10 EF XAP2.

Key technical standards referenced in this document include:

• ISO 1043 / ISO 11469 – Resin identification and part marking

• ISO 1183 – Density measurement

• ISO 527-1/-2 – Tensile properties

• ISO 178 – Flexural properties

• ISO 179/1eU / 1eA – Charpy impact resistance

• ISO 75-1/-2 – Heat deflection temperature

• ISO 1133 – Melt volume-flow rate

• ISO 11357-1/-3 – Melting temperature

• ISO 294-4, 2577 – Mold shrinkage

• ISO 3795 (FMVSS 302) – Automotive flammability

• VDA 275 – Automotive interior emission testing

Our technical team can supply relevant standard excerpts for your engineering reference.

FAQ

Q1: What is Hostaform XGC10 EF XAP2 and what is it used for?
A: Hostaform XGC10 EF XAP2 is an easy flowing, 10% glass fiber reinforced POM‑C (Polyoxymethylene Copolymer) injection molding grade. The “EF” designation indicates Easy Flow, and “XAP2” denotes Celanese’s low emission technology with VDA 275 <5 ppm. It is widely used in automotive interior components, gear housings, gears, bearings, climate control unit components (approved for VW Group / Porsche / Hella), fuel system components, door locks, electrical & electronics (connectors, switches, housings), and structural applications requiring high stiffness and heat resistance.

Q2: What does “XGC10 EF XAP2” mean in the grade name?
A: XGC indicates the XGC series – Celanese’s enhanced glass fiber reinforced POM family offering superior balance of strength, stiffness, and toughness. 10 refers to approximately 10% glass fiber content. EF stands for Easy Flow – indicating excellent flowability for injection molding. XAP2 denotes Celanese’s proprietary low emission technology for reduced VOC emissions and low odor, with emissions according to VDA 275 <5 ppm.

Q3: What makes this grade different from standard glass fiber reinforced POM grades?
A: Compared to traditional glass fiber reinforced grades such as Hostaform C 9021 GV1/10, Hostaform XGC10 EF XAP2 delivers higher strength and lower emissions. The XGC series offers an enhanced balance of strength, stiffness, and toughness at low temperatures, making it a “best-in-class” glass fiber reinforced copolymer. It also features easy flow for complex part geometries and low emission technology for automotive interior applications.

Q4: What are the key mechanical properties?
A: Tensile modulus 4900 MPa, tensile stress at break 110 MPa, tensile strain at break 4%, flexural modulus 4700 MPa, Charpy notched impact strength 6.5 kJ/m² (23°C and -30°C), Charpy impact strength 60 kJ/m² (23°C), melting temperature 166°C, and heat deflection temperature 154°C at 1.8 MPa.

Q5: What is the MVR of this material?
A: Melt‑volume‑flow‑rate equals 12.5 cm³/10min measured under 190°C / 2.16 kg test condition.

Q6: Is this material suitable for automotive applications?
A: Yes. Hostaform XGC10 EF XAP2 features low emissions (VDA 275 <5 ppm), FMVSS Class B flammability with burning rate 81 mm/min for 1 mm thickness, and has special part approval for VW Group. It is used in Porsche / Hella / Ditter Plastik climate control unit components.

Q7: What is the heat deflection temperature of this material?
A: The heat deflection temperature at 1.8 MPa is 154°C, enabling use in elevated temperature environments.

Q8: Is drying required before processing?
A: Drying is not required for this grade. If material has come into contact with moisture through improper storage, drying at 100°C for 3-4 hours is recommended.

Q9: What are recommended processing‑temperature windows?
A: Optimum melt temperature: 200°C; Melt temperature range: 190-210°C. Optimum mold temperature: 100°C; Mold temperature range: 80-120°C.

Q10: What is the density of this material?
A: The density is 1480 kg/m³.

Q11: What is the mold shrinkage of this material?
A: Molding shrinkage is 1.0% parallel and 1.1% normal (ISO 294-4, 2577).

Q12: What automotive OEM approvals does this material have?
A: Hostaform XGC10 EF XAP2 has special part approval for VW Group and is used in Porsche / Hella / Ditter Plastik climate control unit components (HF XGC10 EF XAP2).

Q13: Can I buy this material and what is lead‑time?
A: Yes. Submit your inquiry via our quick inquiry form or email ruiqingchem@gmail.com, specify quantity, application and delivery address. Regular orders 1‑5 tons ship within 7‑10 working days after payment confirmation. Large‑volume or urgent orders can be negotiated separately.

Q14: What are limitations?
A: POM‑C does not resist strong mineral acids, powerful oxidizing agents, or continuous exposure to hot water >80°C. The glass fiber reinforced grade also has reduced impact strength and elongation compared to unreinforced grades and may be abrasive to molds and processing equipment. Consult our technical team for chemical‑compatibility data for your exact working environment.

CTA (Call to Action)

Ready to order Hostaform XGC10 EF XAP2?

To get precise quotation and professional technical support, please share these details:

• Required quantity (kg or tons)

• Destination port or delivery address

• Target application and part brief (automotive, structural components, climate control, gears, etc.)

• Core performance requirements (high stiffness, low emission, heat resistance, etc.)

• Document requirement (TDS, SDS, VDA 275 emission report, FMVSS 302 compliance, OEM approval documentation, etc.)

Sample Policy:

• Samples are for laboratory validation tests only, not for production use.

• Buyer bears international sample‑shipping freight.

• If bulk‑material performance deviates from sample reference, Celanese official TDS serves as authoritative benchmark.

Take action now:

• Send Inquiry – Use our quick inquiry form

• Email Us – ruiqingchem@gmail.com

• Live Chat – Click bottom‑right chat widget to speak directly with our team

After-Sales Support

Disclaimer

DISCLAIMER: All technical data is referenced from original Celanese typical values for Hostaform XGC10 EF XAP2. Our company acts as authorized distributor/trader rather than original manufacturer. Final component performance depends on part geometry, processing setup and end‑use environment. Buyers shall independently validate material suitability for individual applications. Our firm bears no liability for finished‑part failure caused by improper design or improper processing. Always reference latest Celanese official TDS of Hostaform XGC10 EF XAP2 as definitive specification.