Hostaform C 9021 XAP LS colored – Low Emission Pre-Colored POM-C

描述

Hostaform C 9021 XAP LS colored is a low emission, UV-stabilized, pre-colored POM-C (Polyoxymethylene Copolymer) injection molding material, genuinely manufactured by Celanese and imported as original product. We supply this grade as an authorized distributor / trader, ensuring full traceability and access to official Celanese technical documentation.

This grade is formulated with Celanese’s proprietary XAP low emission technology, delivering very low VOC emissions and low odor. It is also UV-stabilized and pre-colored for excellent weathering resistance and consistent appearance.

The “XAP” designation indicates innovative low-emission technology (X for innovative development, AP for Advanced Processing), while “LS” stands for Low Smoke / Low Emission and “colored” indicates pre-colored formulation.

It offers high rigidity (2850 MPa tensile modulus), outstanding toughness (200 kJ/m² impact strength), good heat resistance (104°C HDT), excellent chemical resistance, and low moisture absorption. With regular stock availability, we support both trial orders and bulk shipments for automotive interior and other low-emission applications.

Hostaform C 9021 XAP LS colored Key Features

Hostaform C 9021 XAP LS colored offers the following key performance benefits:

• XAP Low Emission Technology – Proprietary Celanese technology providing very low VOC emissions and low odor, especially suitable for automotive interior applications.

• UV Stabilized – Excellent UV resistance for long-term outdoor and automotive applications, preventing aging, whitening, and chalking.

• Pre-Colored – Available in a wide range of colors (e.g., 7761 Orange); eliminates secondary painting operations and ensures consistent color appearance.

• High Rigidity & Strength – Tensile modulus of 2850 MPa and yield stress of 64 MPa.

• Outstanding Toughness – Charpy impact strength of 200 kJ/m² at 23°C and -30°C.

• Good Heat Resistance – Heat deflection temperature of 104°C at 1.8 MPa.

• Excellent Chemical Resistance – Resistant to solvents, fuels, and strong alkalis, as well as good hydrolysis resistance.

• Excellent Dimensional Stability – Low moisture absorption (0.65% at 23°C/sat) and low CLTE (110 E-6/K).

• Excellent Slip/Wear Properties – Very good sliding and wear properties for moving parts.

• Heavy-Metal Free – Environmentally friendly formulation.

• Regulatory Compliance – Most grades comply with FDA and EU food contact regulations; burning rate ISO 3795 and FMVSS 302 <75 mm/min for thickness >1mm. Full SDS available upon request.

Hostaform C 9021 XAP LS colored Typical Applications

Explore our full range of engineering plastics solutions for more industry-specific case studies.

Material Advantages

The following material advantages make Hostaform C 9021 XAP LS colored the preferred choice for automotive interior and low-emission applications:

• XAP Low Emission Technology – Celanese’s proprietary XAP technology delivers significantly reduced VOC emissions and low odor (VDA 275 <10 ppm), meeting stringent automotive interior air quality standards.

• UV Stabilization – Excellent resistance to UV degradation ensures long-term color stability and mechanical property retention in outdoor and sunlight-exposed applications, preventing aging, whitening, and chalking.

• Pre-Colored Formulation – Eliminates secondary painting operations, reducing costs and environmental impact. Available in a wide range of colors with consistent batch-to-batch color control.

• High Mechanical Performance – Excellent balance of strength (64 MPa yield stress), stiffness (2850 MPa modulus), and toughness (200 kJ/m² impact strength).

• Outstanding Dimensional Stability – Low moisture absorption (0.65%) and low CLTE (110 E-6/K) ensure parts maintain their dimensions across varying environmental conditions.

• Good Chemical Resistance – Outstanding resistance to solvents, fuels, strong alkalis, hydrolysis, fatigue, creep, moisture, and stress cracking.

• Excellent Slip/Wear Properties – Very good sliding and wear properties for moving parts.

• Good Thermal Stability – Higher stability to thermal and oxidative degradation compared to acetal homopolymers.

• Good Electrical Properties – Volume resistivity of 1×10¹² Ω·m and surface resistivity of 1×10¹⁴ Ω.

• Heavy-Metal Free – Environmentally friendly formulation.

• Regulatory Compliance – Most grades comply with FDA and EU food contact regulations. Burning rate ISO 3795 and FMVSS 302 <75 mm/min for thickness >1mm.

• Batch-to-Batch Consistency – Produced by Celanese under strict ISO standards, ensuring stable properties and color consistency across all shipments.

• Reliable Supply – We maintain inventory and a stable supply chain. For details on our supply capabilities, please see our company background .

Typical Properties (ISO Standards)

Typical properties of Hostaform C 9021 XAP LS colored measured per ISO standards are listed below:

Important Notes on Typical Data:

1. Values listed are typical and based on Celanese official data sheets. They do not constitute a product specification.

2. Batch-to-batch variations may occur. Confirm properties with specific batch certificate for critical applications.

3. Final product performance depends on part design, processing conditions, and end-use environment.

4. Celanese original TDS remains the definitive reference. For detailed data, request the latest official TDS for Hostaform C 9021 XAP LS colored from our team.

Processing Guidelines (Injection Molding)

The following injection molding parameters are recommended for Hostaform C 9021 XAP LS colored:

Critical Processing Warnings for Hostaform C 9021 XAP LS colored:

• Thermal Degradation: POM can decompose at high temperatures, releasing formaldehyde gas. Ensure adequate ventilation and avoid prolonged residence time in the barrel.

• Color Consistency: As a pre-colored grade, ensure processing equipment is clean to avoid color contamination. Color stability is enhanced by UV stabilization.

• Material Purity: Strictly avoid contamination with other polymers, as this will compromise the low-emission properties, UV stability, and color consistency.

• Regrind/Recycled Material: Adding regrind is not recommended for this low-emission specialty grade. Re-processing may introduce additional volatile compounds and compromise XAP low emission properties and color consistency. If necessary, use a very small percentage (<10%) only with prior validation testing.

• Storage: Store in a cool, dry place and use sealed, original packaging when possible to maintain low-emission characteristics and color stability.

Related Products

• Explore Our Full POM Product Portfolio – Browse all POM copolymer and homopolymer grades we supply.

• Low Emission POM (XAP Series) – Discover low VOC, low odor grades for automotive interior applications.

• UV-Stabilized POM Grades – View grades specifically formulated for outdoor and UV-exposed applications.

• Pre-Colored Engineering Plastics – Explore other pre-colored grades for consistent appearance.

• POM for Automotive Applications – View grades specifically suited for automotive interior and exterior components.

Technical Documents

We provide the following documentation to support your material selection and compliance needs:

To request any of the above documents, please contact us via:

• Email: ruiqingchem@gmail.com

• Online form: Our contact page

We will respond within 1 working day. Please specify the document type, material grade, and color code.

External Reference

For additional information, please refer to the official Celanese Hostaform product portal and the latest material datasheets. Key technical standards referenced in this document include:

• ISO 1043 / ISO 11469 – Resin identification and part marking

• ISO 1183 – Density measurement

• ISO 527 – Tensile properties

• ISO 179/1eU / 1eA – Impact resistance

• ISO 75-1/-2 – Heat deflection temperature

• ISO 1133 – Melt volume-flow rate

• ISO 11357-1/-3 – Melting temperature

• ISO 294-4, 2577 – Mold shrinkage

• ISO 11359-1/-2 – Coefficient of linear thermal expansion

• ISO 62 – Water absorption

• IEC 62631 – Electrical properties

• VDA 275 – Automotive interior emission testing

• FMVSS 302 / ISO 3795 – Automotive flammability

Our team can provide relevant excerpts from these standards for your reference.

FAQ

Q1: What is Hostaform C 9021 XAP LS colored and what is it used for?
A: It is a low emission, UV-stabilized, pre-colored POM-C (Polyoxymethylene Copolymer) injection molding material incorporating Celanese’s proprietary XAP low emission technology. The “XAP” designation indicates innovative low-emission technology, “LS” stands for Low Smoke / Low Emission, and “colored” indicates pre-colored formulation. It delivers very low VOC emissions, low odor, UV stability, and consistent color. It is widely used in automotive interior components (instrument panels, air vents, interior trim), electrical & electronics, consumer goods, household appliances, and precision engineering. It is also UV-stabilized to prevent aging and color fading.

Q2: What does “XAP”, “LS”, and “colored” mean in the grade name?
A: XAP is Celanese’s proprietary low emission technology for Hostaform POM. X stands for innovative development products, and AP stands for Advanced Processing. LS stands for Low Smoke / Low Emission, indicating reduced VOC emissions and low odor. colored indicates the material is pre-colored, eliminating the need for secondary painting and ensuring consistent appearance. The colors in C 9021 XAP LS are light-stabilized.

Q3: What are the emission properties of this material?
A: Hostaform C 9021 XAP LS colored is a reduced emission grade with low VOC and low odor. VDA 275 emissions are <10 ppm, making it suitable for automotive interior applications with strict cabin air quality requirements.

Q4: Is this material UV stabilized?
A: Yes, Hostaform C 9021 XAP LS colored is UV-stabilized, providing excellent weathering resistance for outdoor and automotive applications. The colors in this grade are light-stabilized, preventing aging, whitening, and chalking.

Q5: What colors are available?
A: Hostaform C 9021 XAP LS colored is available in a wide range of pre-colored options. For example, color code 7761 is available in Orange. Other colors can be customized upon request. The pre-colored formulation ensures consistent batch-to-batch color control.

Q6: What are the key mechanical properties?
A: Tensile modulus of 2850 MPa, yield stress of 64 MPa, nominal strain at break of 30%, Charpy impact strength of 200 kJ/m², Charpy notched impact strength of 6.5 kJ/m², and heat deflection temperature of 104°C at 1.8 MPa.

Q7: What is the automotive flammability rating?
A: Burning rate according to ISO 3795 and FMVSS 302 is <75 mm/min for thickness >1mm, making it suitable for automotive interior applications.

Q8: Is this material food contact compliant?
A: Most Hostaform grades comply with FDA and EU food contact regulations. For specific food contact compliance for this colored grade, please consult our technical team and request the relevant compliance documentation for your specific application and color.

Q9: Can I purchase this material and what is the lead time?
A: Yes, simply send your inquiry via our quick inquiry form or email us at ruiqingchem@gmail.com with your required quantity, color code, application, and delivery address. Regular orders (1–5 tons) are typically delivered within 7–10 working days after order confirmation and payment receipt. Larger quantities or urgent orders can be discussed with our team.

Q10: What are the limitations of this material?
A: POM materials are not suitable for use with strong acids, strong oxidizing agents, or continuous high-temperature water (>80°C) . Please consult our technical team for chemical compatibility data for your specific use environment.

CTA (Call to Action)

Ready to order Hostaform C 9021 XAP LS colored?

To provide you with an accurate quotation and technical support, please share the following information:

• Estimated quantity (kg or tons)

• Destination port or delivery address

• Intended application and part design (e.g., wall thickness, dimensions, operating environment)

• Required color code (e.g., 7761 Orange, or custom color requirements)

• Key performance requirements (e.g., low emission / VOC requirements, UV stability, color consistency)

• Need for third-party testing or compliance documentation (e.g., VDA 275 test report for automotive applications)

Sample Policy:

• Samples are provided for laboratory testing and validation only and are not for mass production.

• International freight costs for samples are borne by the buyer.

• If bulk material shows typical batch-to-batch variation from the sample, Celanese official TDS shall be the definitive reference standard.

Take action now:

• Send Inquiry – Use our quick inquiry form

• Email Us – ruiqingchem@gmail.com

• Live Chat – Click the chat button at the bottom right to speak with our team

After-Sales Support

We provide the following after-sales support to ensure a smooth procurement experience:

Disclaimer

DISCLAIMER: All data provided is for reference based on manufacturer (Celanese) typical values. Our company is an authorized distributor/trader, not a manufacturer. Final product performance depends on part design, processing, and end-use. User is responsible for evaluating material suitability for their specific application. We shall not be liable for end-product performance or design failures. Please refer to the latest official Celanese TDS for definitive specifications.