描述
Fortron 6341L4 is a 40% glass fiber reinforced, tribological-modified polyphenylene sulfide (PPS) injection molding grade from Celanese Corporation. This specialty grade is specifically formulated to provide improved tribological performance—reduced friction and wear—for demanding mechanical applications .
Fortron 6341L4 offers the same mechanical properties as Fortron 1342L4, but with a different tribological adjustment . This makes it an excellent choice for applications requiring a balance of high strength, stiffness, dimensional stability, and enhanced wear resistance.
As a linear, semi-crystalline PPS, Fortron 6341L4 is relatively impermeable to gases, hydrocarbons, and other liquids compared to other materials. It provides high dimensional stability, low coefficient of friction, low shrinkage, excellent mechanical properties, creep resistance at high temperatures, a high continuous use temperature (160°C to 240°C), and very low moisture absorption .
This grade exhibits high hardness, rigidity, and excellent resistance to corrosion, hydrolysis, oxidation, heat, and paraffin buildup. It shows excellent chemical resistance to all solvents below 200°C, acids, bases, typical and alternative automotive fuels, and petroleum fluids at elevated temperatures . The material complies with RoHS, PFOS, and PFOA regulations and is suitable for lead-free soldering and metal replacement applications .
For more PPS grades and technical information, please visit our PPS/Polyphenylene Sulfide product page. You can also explore Celanese’s official Fortron PPS portfolio for additional manufacturer insights.
Key Features of Fortron 6341L4
-
40% Glass Fiber Reinforcement – High strength, stiffness, and dimensional stability
-
Tribological Modification – Reduced friction and wear for enhanced component longevity
-
High Strength – Tensile strength of 165 MPa
-
High Stiffness – Tensile modulus of 14,400 MPa; flexural modulus of 13,700 MPa
-
Excellent Heat Resistance – HDT of 270°C at 1.80 MPa; melting temperature of 280°C
-
Good Impact Resistance – Notched Izod impact of 8.0 kJ/m²
-
Very Low Moisture Absorption – 0.02% water absorption, ensuring dimensional stability
-
Excellent Chemical Resistance – Resists solvents, acids, bases, and automotive fuels below 200°C
-
Low Shrinkage – CTE parallel: 20 × 10⁻⁶/K; CTE transverse: 40 × 10⁻⁶/K
-
Regulatory Compliance – RoHS, PFOS, and PFOA compliant
-
Global Supply – Available across North America, Europe, Asia Pacific, South & Central America, Africa & Middle East
Typical Applications for Fortron 6341L4
| Industry | Typical Components & Considerations |
|---|---|
| Wear-Resistant Components | Bearings, gears, wear pads, sliding friction parts – utilizing tribological modification for low friction and wear |
| Electrical & Electronics | Connectors, sensors, coil bobbins – requiring V-0 flammability and dimensional stability |
| Automotive | Under-the-hood components, fuel system parts – requiring chemical resistance to fuels and heat |
| Lead-Free Soldering | Electronic components suitable for lead-free soldering processes |
| Metal Replacement | Applications requiring metal replacement with high-performance polymer |
Typical Properties of Fortron 6341L4
| Property | Value | Test Method |
|---|---|---|
| Physical | ||
| Density | 1.70 g/cm³ (1700 kg/m³) | ISO 1183 |
| Water Absorption (Saturation) | 0.02% | ISO 62 |
| Mechanical | ||
| Tensile Modulus | 14,400 MPa | ISO 527 |
| Tensile Strength at Break | 165 MPa | ISO 527 |
| Tensile Strain at Break | 1.6% | ISO 527 |
| Flexural Modulus | 13,700 MPa | ISO 178 |
| Flexural Strength | 245 MPa | ISO 178 |
| Impact | ||
| Charpy Notched Impact (23°C) | 8.0 kJ/m² | ISO 179/1eA |
| Charpy Unnotched Impact (23°C) | 40 kJ/m² | ISO 179/1eU |
| Izod Notched Impact (23°C) | 8.0 kJ/m² | ISO 180/1A |
| Thermal | ||
| Melting Temperature | 280°C | ISO 11357 |
| Glass Transition Temperature | 90°C | ISO 11357 |
| HDT @ 1.80 MPa | 270°C | ISO 75 |
| HDT @ 8.00 MPa | 215°C | ISO 75 |
| CTE – Parallel | 20 × 10⁻⁶/K | ISO 11359 |
| CTE – Transverse | 40 × 10⁻⁶/K | ISO 11359 |
Important Notes on Typical Data
📌 Values are typical – The data listed above is sourced from manufacturer data sheets for reference only and does not constitute binding product specifications for Fortron 6341L4 .
📌 Batch variations – Batch-to-batch deviations may exist. For critical applications, validate performance with batch-specific COA certificates.
📌 Final performance – Actual performance depends on processing conditions and part design. Refer to ISO testing standards for detailed methodology.
📌 Authoritative reference – The manufacturer’s official TDS shall serve as the definitive technical reference for Fortron 6341L4. Request the latest official TDS from our sales team.
Processing Guidelines for Fortron 6341L4
| Step | Process |
|---|---|
| Processing Methods | Injection Molding |
| Drying Recommended | Yes |
| Drying Temperature | 130 – 140°C |
| Drying Time | 3 – 4 hours |
| Suggested Max Moisture | ≤ 0.02% |
| Melt Temperature Range | 320 – 340°C |
| Manifold / Hot Runner Temperature | 330 – 340°C |
| Mold Temperature | 140 – 160°C |
| Hold Pressure | 30 – 70 MPa |
| Back Pressure | ≤ 3 MPa |
| Storage | Store in original, sealed packaging in a cool, dry place away from direct sunlight |
Critical Processing Warnings for Fortron 6341L4
⚠️ Drying Requirement – Fortron 6341L4 requires drying prior to processing. Predrying in a dehumidified air dryer at 130–140°C for 3–4 hours is recommended.
⚠️ Moisture Control – Maximum residual moisture content should be ≤ 0.02%. Proper drying is essential to prevent void formation and ensure optimal part quality.
⚠️ Melt Temperature – The recommended melt temperature range is 320–340°C. Avoid exceeding 340°C to prevent material degradation.
⚠️ Tribological Grade – This grade is specifically formulated for low friction and wear applications . Processing parameters should be optimized to maintain the tribological performance.
⚠️ Storage – Store in original, sealed packaging in a cool, dry place away from direct sunlight. For subsequent storage, the material should be stored dry until processed.
Comparison: Fortron 6341L4 vs. Fortron 1342L4
| Feature | Fortron 6341L4 | Fortron 1342L4 |
|---|---|---|
| Filler Content | 40% Glass Fiber | 40% Glass + PTFE |
| Key Feature | Tribological-modified with different adjustment | Low wear / low friction |
| Mechanical Properties | Same as 1342L4 | Similar |
| Tribological Adjustment | Different tribological adjustment | Standard PTFE-based tribological grade |
| Primary Application | Wear-resistant components with specific tribological profile | Bearings, gears, sliding friction |
Related Products
-
PPS/Polyphenylene Sulfide – View our full range of PPS products
-
Fortron 1342L4 – PTFE-modified, low-wear 40% glass reinforced PPS
-
Fortron 1140L4 – 40% glass reinforced PPS, standard injection molding grade
-
Fortron 1140L6 – 40% glass reinforced PPS, easy flow for thin-wall applications
-
Explore Engineering Plastics – Browse all engineering plastic materials
-
About Our Company – Learn more about our supply capabilities and quality assurance
Technical Documents for Fortron 6341L4
| Document Type | Description & Source |
|---|---|
| Manufacturer Official TDS | Complete physical, thermal, and mechanical properties of Fortron 6341L4 |
| Manufacturer Official SDS | GHS-compliant safety documentation |
| COA (Certificate of Analysis) | Batch-specific quality certification for Fortron 6341L4 |
| UL Yellow Card | UL safety certification |
Request any document above by:
📧 Email: ruiqingchem@gmail.com
📝 Online form: Our contact page
We reply within one working business day. Please clearly state product (Fortron 6341L4) and document type you require.
FAQ about Fortron 6341L4
Q1: What is Fortron 6341L4?
A: Fortron 6341L4 is a 40% glass fiber reinforced, tribological-modified PPS injection molding grade from Celanese, offering low friction and wear characteristics .
Q2: How does Fortron 6341L4 differ from Fortron 1342L4?
A: Fortron 6341L4 offers the same mechanical properties as Fortron 1342L4 but with a different tribological adjustment .
Q3: What are the key features of Fortron 6341L4?
A: 40% glass reinforcement; tribological-modified; tensile strength 165 MPa; tensile modulus 14,400 MPa; HDT 270°C; V-0 flame retardant; excellent chemical resistance .
Q4: What are the typical applications for Fortron 6341L4?
A: Wear-resistant components (bearings, gears), electrical & electronic components, automotive under-the-hood parts, and metal replacement applications .
Q5: What is the recommended drying condition for Fortron 6341L4?
A: Dry at 130–140°C for 3–4 hours using a dehumidified air dryer. Maximum residual moisture should be ≤ 0.02%.
Q6: What is the density of Fortron 6341L4?
A: 1.70 g/cm³ (1700 kg/m³) .
Q7: What is the HDT @ 1.80 MPa of Fortron 6341L4?
A: 270°C .
Q8: What regions is Fortron 6341L4 available in?
A: North America, Europe, Asia Pacific, South & Central America, Africa & Middle East .
Q9: Is Fortron 6341L4 flame retardant?
A: Yes, it is inherently flame-retardant (V-0) .
Q10: Is Fortron 6341L4 RoHS compliant?
A: Yes, it complies with RoHS, PFOS, and PFOA regulations .
CTA (Call to Action)
Ready to order Fortron 6341L4?
To get a precise quotation and professional technical support for Fortron 6341L4, please share:
-
Required quantity (kg)
-
Destination port or delivery address
-
Target application (wear-resistant components, electronics, automotive, etc.)
-
Document requirements (TDS, SDS, COA, UL docs)
Sample Policy:
-
Samples of Fortron 6341L4 are for laboratory validation tests only, not for production use.
-
Buyer bears international sample-shipping freight.
-
If bulk-product performance deviates from sample reference, the manufacturer’s official TDS serves as the authoritative benchmark.
Take action now:
📧 Email Us – ruiqingchem@gmail.com
📝 Send Inquiry – Use our quick inquiry form
💬 Live Chat – Click the bottom-right chat widget to speak directly with our team
After-Sales Support
| Service | Details |
|---|---|
| Quality Inspection Period | All quality-related claims must be submitted within 7 working days after delivery, supported by test data and photographic evidence. |
| Return / Exchange Policy | Confirmed product defects caused by our side trigger replacement or refund. Terms and conditions apply. |
| Logistics Damage | Report shipping damage directly to carrier immediately upon goods receipt. We assist with claim-document preparation. |
| Technical Support | Remote technical guidance available. On-site troubleshooting can be arranged upon special request. |
| Export Documentation | We supply commercial invoice, packing list, bill of lading, COA, and additional compliance certificates on request. |
Disclaimer
DISCLAIMER: All technical data is referenced from original manufacturer typical values for Fortron 6341L4 . Our company acts as supplier/trader rather than original manufacturer. Final performance depends on processing conditions and part design. Buyers shall independently validate product suitability for individual applications. Our firm bears no liability for product failure caused by improper processing or improper usage. Always reference the latest manufacturer official TDS of Fortron 6341L4 as the definitive specification.
