描述
857G-030 Black is a waterborne 857G-030 Black PTFE Filled Primer from Chemours‘ Teflon industrial coatings portfolio, genuinely manufactured by Chemours and imported as original product. As an authorized distributor and trader, we supply genuine material with full traceability and direct access to official Chemours technical documentation. For more product options and company information, please visit our website at https://szrqchem.com/.
This 857G-030 Black PTFE Filled Primer is specifically engineered as the foundational layer for PTFE / PFA / FEP topcoat systems. Its core function is to serve as a robust “bridge” between the substrate and the topcoat, dramatically enhancing adhesion and fundamentally resolving coating delamination issues to ensure long-term durability of the coating system.
The 857G-030 Black PTFE Filled Primer is an aqueous-based dispersion that imparts nonstick properties to equipment used in food processing, office automation, paper, textile, and commercial laundry applications. When used in combination with PTFE / PFA / FEP topcoats, the resulting composite coating system delivers excellent nonstick release, easy cleanability, low coefficient of friction, and significantly enhanced wear resistance. The filled formulation provides additional reinforcement, improving abrasion resistance and extending service life.
With regular stock availability, we support both trial orders and large-volume bulk shipments for food processing equipment, industrial bakeware, automotive components, and other demanding applications requiring FDA-compliant nonstick coatings.
Key Features of 857G-030 Black PTFE Filled Primer
-
FDA Food Contact Compliant – Approved for food contact applications per 21CFR, suitable for food processing equipment, industrial bakeware, and other food contact applications.
-
Superior Adhesion – Acts as a robust “bridge” between the substrate (aluminum, steel, stainless steel, etc.) and the PTFE topcoat, fundamentally preventing coating delamination and ensuring the entire coating system remains firmly bonded.
-
Filled Formulation – Incorporates additional reinforcing materials to enhance abrasion resistance and extend service life compared to unfilled primers.
-
Enhanced Durability – By improving adhesion, the primer significantly extends the overall service life of the coating system, making it more resistant to wear, impact, and thermal cycling.
-
Improved Corrosion Resistance – Provides additional rust and chemical corrosion protection, forming a more comprehensive protective system when combined with the topcoat, particularly suitable for harsh environments.
-
Waterborne Formulation – Low VOC emissions, environmentally friendly processing, and safer for operators.
-
Broad Topcoat Compatibility – Suitable for use with PTFE, PFA, and FEP topcoat systems.
-
Optimized Film Build – Single coat film build of 0.300 – 0.400 mil (7.62 – 10.2 microns) ensures proper adhesion without excessive build.
-
Thermal Stability – Continuous service temperature up to 260°C (500°F); cure temperature at 435°C (815°F).
-
Optimized Surface – A smooth, well-adhered primer layer allows the subsequent PTFE topcoat to distribute more evenly, resulting in better smoothness, nonstick properties, and aesthetic appearance.
Typical Applications for 857G-030 Black
| Industry | Typical Components & Considerations |
|---|---|
| Food Processing Equipment | Food contact equipment, conveyor components, processing machinery – FDA compliant applications |
| Industrial Bakeware | Bread pans, sheet pans, baking molds – requires durable, food-grade nonstick coating system |
| Cookware | High-performance nonstick cookware – ensures coating integrity under scraping and thermal shock |
| Office Automation | Printer rollers, copier components – requires nonstick, low-friction surfaces |
| Paper & Textile Industry | Equipment requiring release properties and easy cleaning |
| Commercial Laundry | Equipment components requiring nonstick, corrosion-resistant surfaces |
| Automotive Components | Seals, bearings, and components requiring lubrication and strong adhesion to metal parts |
| Chemical Processing Equipment | Valves, pipes, and containers as part of corrosion-resistant linings |
| General Industrial | Components requiring PTFE nonstick properties with enhanced adhesion and durability |
Material Advantages
The 857G-030 Black PTFE Filled Primer is a waterborne, filled PTFE primer that delivers:
-
Enhanced Adhesion – Primers effectively prepare surfaces before coating application, giving the coating a smooth surface with which it can bind by creating a protective layer over the substrate. This protective bind decreases the porosity of the coating so that it is not absorbed by the substrate.
-
Filled Formulation Benefits – The filled primer incorporates additional reinforcing materials that enhance abrasion resistance and extend service life compared to unfilled primers.
-
Chemical Inertness – PTFE-based formulation provides excellent resistance to chemicals and corrosion.
-
Thermal Stability – Maintains performance at continuous service temperatures up to 260°C (500°F), the highest of any fluoroplastic.
-
Environmental Compliance – Waterborne carrier reduces VOC emissions compared to solvent-based alternatives.
-
Food Safety – FDA compliant for food contact per 21CFR, enabling use in food processing and food contact applications.
Chemours, as the inventor of Teflon, brings over 80 years of fluoro-polymer expertise, ensuring batch-to-batch consistency, reliable supply, and full technical support.
Typical Properties
| Property | 857G-030 Black | Unit / Remarks |
|---|---|---|
| Product Type | PTFE Waterborne Filled Primer | – |
| Color | Black | Consistent industrial finish |
| Carrier | Waterborne (aqueous dispersion) | Low VOC |
| Coating System | Filled Primer (base layer) | Two-coat or three-coat systems |
| FDA Compliance | Yes – Food Contact per 21CFR | – |
| Film Build per Coat | 7.62 – 10.2 µm (0.300 – 0.400 mil) | – |
| Max Total Film Build | 10.2 µm (0.400 mil) | – |
| Coverage | 4.10 m²/kg (4.72 m²/L) | – |
| Viscosity | 250 – 375 cP | Brookfield RVT |
| Volume Solids | 11.3 – 12.3% | – |
| Weight Solids | 22.5 – 24.5% | – |
| Density | 1.15 kg/L (9.59 lb/gal) | – |
| Continuous Service Temp. | 260°C (500°F) | – |
| Cure Temperature | 435°C (815°F) | – |
| Suitability | FEP, PFA, PTFE | Topcoat compatibility |
| Application Method | Spray | Conventional or HVLP |
| Available Form | Liquid waterborne | Ready to spray |
| Shelf Life | 18 months | Unopened, proper storage |
Important Notes on Typical Data:
-
Values listed are typical and sourced from Chemours official data sheets. They do not constitute binding product specification.
-
Batch-to-batch deviations may exist. For critical applications, validate performance with batch-specific COA certificate.
-
Final performance depends on substrate preparation, application method, and curing conditions.
-
Chemours original TDS shall serve as definitive technical reference. Request the latest official TDS from our sales team.
Processing Guidelines
| Step | Process |
|---|---|
| Substrate | Rolled and cast aluminum, stainless steel |
| Surface Preparation | Degrease then abrasive blasting to achieve proper surface profile for adhesion |
| Coating Preparation | Gently mix 15 minutes or more until homogeneous. Set mixer speed to create a vortex while avoiding air entrapment. Use axial flow impeller |
| Filtering | 100 mesh (approx. 150 µm) stainless steel or equivalent |
| Primer Application | Apply 857G-030 Black via conventional or HVLP spray |
| Primer Cure | Follow Chemours recommended cure schedule at 435°C (815°F) |
| Topcoat Application | Apply compatible PTFE, PFA, or FEP topcoat over cured primer |
| Final Curing | Cure per topcoat manufacturer‘s recommended schedule |
Critical Processing Warnings:
-
Surface Preparation: Proper surface preparation is critical for adhesion. Ensure surfaces are clean, dry, and properly roughened.
-
Primer as Foundation: The primer serves as the critical foundation for the entire coating system. Proper application and curing are essential for optimal adhesion and durability.
-
Topcoat Compatibility: 857G-030 is compatible with PTFE, PFA, and FEP topcoat systems. Ensure topcoat selection matches your specific application requirements.
-
Film Build Control: Maintain single coat film build at 7.62 – 10.2 µm (0.300 – 0.400 mil). Excessive film build may affect adhesion and performance.
-
Curing: Cure time depends on part mass and oven characteristics. Always verify with test pieces.
-
Storage: Store in original, sealed containers in a cool, dry place away from direct sunlight.
-
Shelf Life: 18 months in unopened, clean, dry storage.
Related Products
-
Explore Teflon PTFE Coatings – Browse all Teflon industrial coating options
-
850G-300 Clear – Teflon PTFE Acid Primer – Acid primer for PTFE, PFA, and FEP topcoat systems
-
About Our Company – Learn more about our supply capabilities and quality assurance
External Reference
For authoritative information, please refer to the following official resources:
-
Chemours Official Website – Corporate headquarters and product portfolio overview
-
Teflon Industrial Coatings Product Center – Official technical literature and application guides
Technical Documents
| Document Type | Description & Source |
|---|---|
| Chemours Official TDS | Complete physical, thermal, and mechanical properties of 857G-030 Black, issued by Chemours original |
| Chemours Official SDS | GHS-compliant chemical safety documentation, original Chemours document |
| Chemours Distributor Authorization Certificate | Proof of our authorized-distributor qualification for Chemours Teflon series, available upon request |
| FDA Compliance Declaration | FDA food contact compliance statement per 21CFR |
| COA (Certificate of Analysis) | Batch-specific quality certification |
| Application & Usage Guide | Detailed application guidance for primer and topcoat systems |
Request any document above by:
-
Email:
ruiqingchem@gmail.com -
Online form: Our contact page
We reply within one working business day. Please clearly state product (857G-030 Black) and document type you require.
FAQ
Q1: What is 857G-030 Black and what is it used for?
A: 857G-030 Black is a waterborne, food-grade PTFE filled primer from the Teflon industrial coatings portfolio. It serves as the foundational layer for PTFE, PFA, and FEP topcoat systems, dramatically enhancing adhesion between the substrate and the topcoat to prevent delamination and ensure long-term durability.
Q2: Is 857G-030 Black FDA compliant?
A: Yes. 857G-030 is FDA compliant for food contact applications per 21CFR. It is suitable for food processing equipment, industrial bakeware, and other food contact applications.
Q3: What topcoats are compatible with 857G-030 Black?
A: 857G-030 is suitable for use with PTFE, PFA, and FEP topcoat systems. This includes topcoats such as 857G-230 Black, 857G-240 Clear, 857G-299 Dark Brown, and other Teflon industrial topcoats.
Q4: What is the film build of 857G-030 Black?
A: The single coat film build is 7.62 – 10.2 µm (0.300 – 0.400 mil). Maximum total film build is 10.2 µm (0.400 mil).
Q5: What is the cure temperature of 857G-030 Black?
A: The cure temperature is 435°C (815°F). Continuous service temperature is 260°C (500°F).
Q6: What is the difference between filled and unfilled primers?
A: Filled primers (such as 857G-030) incorporate additional reinforcing materials that enhance abrasion resistance and extend service life compared to unfilled primers. They provide improved durability for demanding applications.
Q7: What substrates can 857G-030 Black be applied to?
A: It can be applied to carbon steel, aluminum, stainless steel, alloy steel, brass, magnesium, as well as non-metallic materials including glass, fiberglass, and certain rubbers and plastics.
Q8: What is the lead time for orders?
A: Regular orders ship within 7-10 working days after payment confirmation. Large-volume or urgent orders can be negotiated separately.
Q9: Why is primer necessary for PTFE coatings?
A: PTFE topcoats have inherently weak adhesion to metal substrates. The primer serves as a robust “bridge” between the substrate and the topcoat, ensuring the entire coating system remains firmly bonded and preventing delamination.
CTA (Call to Action)
Ready to order 857G-030 Black?
To get a precise quotation and professional technical support, please share:
-
Required quantity (kg)
-
Destination port or delivery address
-
Target application (food processing, bakeware, cookware, industrial, etc.)
-
Topcoat requirement (PTFE, PFA, or FEP)
-
Document requirement (TDS, SDS, FDA compliance, COA, etc.)
Sample Policy:
-
Samples are for laboratory validation tests only, not for production use.
-
Buyer bears international sample-shipping freight.
-
If bulk-product performance deviates from sample reference, Chemours official TDS serves as the authoritative benchmark.
Take action now:
-
📧 Email Us –
ruiqingchem@gmail.com -
📝 Send Inquiry – Use our quick inquiry form
-
💬 Live Chat – Click the bottom-right chat widget to speak directly with our team
After-Sales Support
| Service | Details |
|---|---|
| Quality Inspection Period | All quality-related claims must be submitted within 7 working-days after delivery, supported by test data and photographic evidence. |
| Return / Exchange Policy | Confirmed product defects caused by our side trigger replacement or refund. Terms and conditions apply. |
| Logistics Damage | Report shipping damage directly to carrier immediately upon goods receipt. We assist with claim-document preparation. |
| Technical Support | Remote technical guidance available. On-site troubleshooting can be arranged upon special request. |
| Export Documentation | We supply commercial invoice, packing list, bill of lading, COA, and additional compliance certificates (e.g., FDA) on request. |
Disclaimer
DISCLAIMER: All technical data is referenced from original Chemours typical values for 857G-030 Black. Our company acts as authorized distributor/trader rather than original manufacturer. Final performance depends on substrate preparation, application method, and curing conditions. Buyers shall independently validate product suitability for individual applications. Our firm bears no liability for coating failure caused by improper application or improper usage. Always reference the latest Chemours official TDS of 857G-030 Black as the definitive specification.
