描述
Fortron 1140L6 is a 40% glass fiber reinforced polyphenylene sulfide (PPS) injection molding grade from Celanese Corporation. This grade is an easier flow version of Fortron 1140L4 , offering essentially the same mechanical characteristics but with improved flow for thin-walled parts with long flow lengths.
The easier flow characteristics make Fortron 1140L6 particularly suitable for thin-wall parts and injection molding applications requiring long flow paths. As a linear, semi-crystalline PPS material, it is relatively impermeable to gases, hydrocarbons, and other liquids compared to other materials. It provides high dimensional stability, low coefficient of friction, low shrinkage, excellent mechanical properties, and creep resistance at high temperatures.
This grade exhibits excellent chemical resistance to all solvents below 200°C, acids, bases, typical and alternative automotive fuels, and petroleum fluids at elevated temperatures. It also offers high hardness and rigidity at elevated temperatures for good load bearing performance, along with excellent resistance to corrosion, hydrolysis, oxidation, heat, and paraffin buildup. The material is RoHS, PFOS, and PFOA compliant.
For more PPS grades and technical information, please visit our PPS/Polyphenylene Sulfide product page. You can also explore Celanese’s official Fortron PPS portfolio for additional manufacturer insights.
Key Features of Fortron 1140L6
-
40% Glass Fiber Reinforcement – High strength and stiffness
-
Easier Flow – Improved flow compared to Fortron 1140L4 , specifically designed for thin-wall parts with long flow lengths
-
High Strength – Tensile strength up to 200 MPa
-
High Stiffness – Flexural modulus of 14,500 MPa
-
Excellent Heat Resistance – HDT of 265–270°C at 1.80 MPa; continuous use up to 240°C
-
Inherent Flame Retardancy – V-0 at 0.38mm thickness
-
Good Weldability – Suitable for secondary welding operations
-
Excellent Chemical Resistance – Resists solvents, acids, bases, and automotive fuels below 200°C
-
Very Low Moisture Absorption – 0.02% water absorption
-
Regulatory Compliance – RoHS, PFOS, and PFOA compliant
-
Global Supply – Available across North America, Europe, Asia Pacific, Latin America, Africa & Middle East
Typical Applications for Fortron 1140L6
| Industry | Typical Components & Considerations |
|---|---|
| Thin-Wall Injection Molding | Thin-wall connectors, thin-wall sensor housings – utilizing excellent flow for long flow path filling |
| Electrical & Electronics | Bobbins, lamp housings, brush holders, electronic components – requiring V-0 flammability and heat resistance |
| Pump Components | Pump bodies, pump impellers, pump housings – requiring chemical resistance and dimensional stability |
| Metal Replacement | Applications requiring high strength and rigidity for metal replacement |
| Lead-Free Soldering | Electronic components suitable for lead-free soldering processes |
Typical Properties of Fortron 1140L6
| Property | Value | Test Method |
|---|---|---|
| Physical | ||
| Density | 1.60 – 1.65 g/cm³ | ISO 1183 / ASTM D792 |
| Water Absorption (Saturation) | 0.02% | ISO 62 |
| Molding Shrinkage – Flow | 0.25 – 0.30% | ISO 294-4 |
| Molding Shrinkage – Transverse | 0.60 – 0.70% | ISO 294-4 |
| Mechanical | ||
| Tensile Modulus | 14,700 MPa | ISO 527 |
| Tensile Strength at Break | 195 – 200 MPa | ISO 527 / ASTM D638 |
| Tensile Strain at Break | 1.9 – 2.0% | ISO 527 / ASTM D638 |
| Flexural Modulus | 14,000 – 14,500 MPa | ISO 178 |
| Flexural Strength | 276 – 285 MPa | ASTM D790 / ISO 178 |
| Impact | ||
| Charpy Notched Impact (23°C) | 10 kJ/m² | ISO 179/1eA |
| Izod Notched Impact (23°C) | 10 kJ/m² | ISO 180/1A |
| Thermal | ||
| Melting Temperature | 280°C | ISO 11357 |
| Glass Transition Temperature | 90°C | ISO 11357 |
| HDT @ 1.80 MPa | 265 – 270°C | ISO 75 / ASTM D648 |
| HDT @ 8.00 MPa | 215°C | ISO 75-2 |
| CTE – Flow | 2.6 × 10⁻⁵/K | ISO 11359 |
| CTE – Transverse | 4.2 × 10⁻⁵/K | ISO 11359 |
| Electrical | ||
| Volume Resistivity | >1×10¹³ Ω·m | IEC 62631 |
| Dielectric Strength | 15 – 18 kV/mm | ASTM D149 / IEC 60243 |
| Flammability | ||
| Flammability @ 0.38mm | V-0 | UL 94 |
Important Notes on Typical Data
📌 Values are typical – The data listed above is sourced from manufacturer data sheets for reference only and does not constitute binding product specifications for Fortron 1140L6.
📌 Batch variations – Batch-to-batch deviations may exist. For critical applications, validate performance with batch-specific COA certificates.
📌 Final performance – Actual performance depends on processing conditions and part design. Refer to ISO testing standards for detailed methodology.
📌 Authoritative reference – The manufacturer’s official TDS shall serve as the definitive technical reference for Fortron 1140L6. Request the latest official TDS from our sales team.
Processing Guidelines for Fortron 1140L6
| Step | Process |
|---|---|
| Processing Methods | Injection Molding |
| Drying Recommended | Yes |
| Drying Temperature | 130 – 140°C |
| Drying Time | 3 – 4 hours |
| Suggested Max Moisture | ≤ 0.02% |
| Dew Point Requirement | ≤ -30°C |
| Optimum Melt Temperature | 320 – 340°C |
| Mold Temperature | 140 – 160°C |
| Storage | Store in original, sealed packaging in a cool, dry place away from direct sunlight |
Critical Processing Warnings for Fortron 1140L6
⚠️ Drying Requirement – Fortron 1140L6 requires drying prior to processing. Predrying in a dehumidified air dryer at 130–140°C for 3–4 hours is recommended. The time between drying and processing should be as short as possible.
⚠️ Moisture Control – Maximum residual moisture content should be ≤ 0.02%.
⚠️ Melt Temperature – The recommended melt temperature range is 320–340°C. Avoid exceeding 340°C to prevent material degradation.
⚠️ Easy Flow Characteristics – This grade is an easier flow version of 1140L4, offering faster mold filling. Adjust processing parameters accordingly for thin-wall and long flow length applications.
⚠️ Reinforced Grade – Contains 40% glass fiber reinforcement, which may require consideration for equipment wear and proper screw design. A shut-off nozzle is preferred to a free-flow nozzle.
⚠️ Storage – Store in original, sealed packaging in a cool, dry place away from direct sunlight. For subsequent storage, the material should be stored dry until processed.
Comparison: Fortron 1140L6 vs. Fortron 1140L4
| Feature | Fortron 1140L6 | Fortron 1140L4 |
|---|---|---|
| Glass Fiber Content | 40% | 40% |
| Flow Characteristics | Easier Flow | Standard Flow |
| Key Feature | Thin-wall & long flow path applications | General injection molding |
| Tensile Strength | 195 – 200 MPa | 195 – 200 MPa |
| Flexural Modulus | 14,000 – 14,500 MPa | 14,000 – 14,500 MPa |
| HDT @ 1.80 MPa | 265 – 270°C | 265 – 270°C |
| Density | 1.60 – 1.65 g/cm³ | 1.60 – 1.65 g/cm³ |
| Special Feature | Improved flow for thin-wall & long flow length parts | — |
Related Products
-
PPS/Polyphenylene Sulfide – View our full range of PPS products
-
Fortron 1140L4 – 40% glass reinforced PPS, standard injection molding grade
-
Fortron 1140L4 DW – 40% glass reinforced PPS for drinking water contact
-
Fortron 1140L4 HR – 40% glass reinforced PPS with improved hydrolysis resistance
-
Fortron 1132L4 – 30% glass reinforced PPS for high-strength injection molding
-
Explore Engineering Plastics – Browse all engineering plastic materials
-
About Our Company – Learn more about our supply capabilities and quality assurance
Technical Documents for Fortron 1140L6
| Document Type | Description & Source |
|---|---|
| Manufacturer Official TDS | Complete physical, thermal, and mechanical properties of Fortron 1140L6 |
| Manufacturer Official SDS | GHS-compliant safety documentation |
| COA (Certificate of Analysis) | Batch-specific quality certification for Fortron 1140L6 |
| UL Yellow Card | UL safety certification (UL94 V-0) |
Request any document above by:
📧 Email: ruiqingchem@gmail.com
📝 Online form: Our contact page
We reply within one working business day. Please clearly state product (Fortron 1140L6) and document type you require.
FAQ about Fortron 1140L6
Q1: What is Fortron 1140L6?
A: Fortron 1140L6 is a 40% glass fiber reinforced PPS injection molding grade from Celanese, offering easier flow compared to Fortron 1140L4, specifically designed for thin-walled parts with long flow paths.
Q2: What are the key features of Fortron 1140L6?
A: 40% glass reinforcement; easier flow than 1140L4; tensile strength 195–200 MPa; flexural modulus 14,500 MPa; HDT 265–270°C; V-0 at 0.38mm; excellent chemical and heat resistance; good weldability.
Q3: What are the typical applications for Fortron 1140L6?
A: Thin-wall connectors and housings, pump components, electronic components, metal replacement applications, and lead-free soldering applications.
Q4: How does Fortron 1140L6 differ from Fortron 1140L4?
A: Fortron 1140L6 is an easier flow version of Fortron 1140L4, offering essentially the same mechanical characteristics but with improved flow for thin-walled parts with long flow paths.
Q5: What is the recommended drying condition for Fortron 1140L6?
A: Dry at 130–140°C for 3–4 hours using a dehumidified air dryer with dew point ≤ -30°C. Maximum residual moisture should be ≤ 0.02%.
Q6: What is the density of Fortron 1140L6?
A: 1.60 – 1.65 g/cm³.
Q7: What is the HDT @ 1.80 MPa of Fortron 1140L6?
A: 265 – 270°C.
Q8: What regions is Fortron 1140L6 available in?
A: North America, Europe, Asia Pacific, Latin America, Africa & Middle East.
Q9: Is Fortron 1140L6 flame retardant?
A: Yes, V-0 at 0.38mm thickness (UL 94).
Q10: Is Fortron 1140L6 RoHS compliant?
A: Yes, it complies with RoHS, PFOS, and PFOA regulations.
Q11: Is Fortron 1140L6 suitable for thin-wall applications?
A: Yes, it is specifically designed for thin-wall parts requiring long flow lengths.
Q12: Does Fortron 1140L6 have good weldability?
A: Yes, this grade exhibits good weldability in secondary operations.
CTA (Call to Action)
Ready to order Fortron 1140L6?
To get a precise quotation and professional technical support for Fortron 1140L6, please share:
-
Required quantity (kg)
-
Destination port or delivery address
-
Target application (thin-wall molding, pumps, electronics, etc.)
-
Document requirements (TDS, SDS, COA, UL docs)
Sample Policy:
-
Samples of Fortron 1140L6 are for laboratory validation tests only, not for production use.
-
Buyer bears international sample-shipping freight.
-
If bulk-product performance deviates from sample reference, the manufacturer’s official TDS serves as the authoritative benchmark.
Take action now:
📧 Email Us – ruiqingchem@gmail.com
📝 Send Inquiry – Use our quick inquiry form
💬 Live Chat – Click the bottom-right chat widget to speak directly with our team
After-Sales Support
| Service | Details |
|---|---|
| Quality Inspection Period | All quality-related claims must be submitted within 7 working days after delivery, supported by test data and photographic evidence. |
| Return / Exchange Policy | Confirmed product defects caused by our side trigger replacement or refund. Terms and conditions apply. |
| Logistics Damage | Report shipping damage directly to carrier immediately upon goods receipt. We assist with claim-document preparation. |
| Technical Support | Remote technical guidance available. On-site troubleshooting can be arranged upon special request. |
| Export Documentation | We supply commercial invoice, packing list, bill of lading, COA, and additional compliance certificates on request. |
Disclaimer
DISCLAIMER: All technical data is referenced from original manufacturer typical values for Fortron 1140L6. Our company acts as supplier/trader rather than original manufacturer. Final performance depends on processing conditions and part design. Buyers shall independently validate product suitability for individual applications. Our firm bears no liability for product failure caused by improper processing or improper usage. Always reference the latest manufacturer official TDS of Fortron 1140L6 as the definitive specification.
