描述
Micromax 2110 Thick Film Resistor Paste, Hybrid Circuits
Type: Resistor Paste
Pack: 100G / 1000G
Resistivity: 8-12 Ω/sq
Noise: ≤-35 dB
TCR: ±50 ppm/°C
Shelf Life: 6 months
MacDermid Alpha Micromax 2110 is a standard-ohm resistor paste from the 2100 Series, offering 8-12 Ω/sq with ultra-low noise ≤-35 dB and exceptional ±50 ppm/°C TCR. Featuring fast 30-minute 850°C firing and thin print capability (16-20 μm) — engineered for precision hybrid circuits requiring superior temperature stability and low noise.
Part of the Micromax 2100 Series, Micromax 2110 is a standard-ohm resistor paste engineered for hybrid circuits requiring excellent TCR performance and ultra-low noise. This composition delivers exceptional temperature stability with hot TCR of -50 to 50 ppm/°C and cold TCR of -50 to 50 ppm/°C, significantly better than conventional resistor pastes. The paste offers ultra-low noise of ≤-35 dB, making it ideal for precision analog and sensitive signal conditioning applications. The 2100 Series offers no blend breaks from 1Ω to 10MΩ/sq, providing design flexibility.
With a sheet resistivity of 8-12 Ω/sq, Micromax 2110 supports standard-ohm applications in hybrid circuits. The paste is optimized for 325-mesh screens with 5-10 μm emulsion thickness, producing a thin dried film thickness of 16-20 μm. Drying is performed at 150°C for 10 minutes. The fast 30-minute firing cycle with a 10-minute peak at 850°C improves production throughput. The material is compatible with Micromax 5164N Pt/Ag high-silver terminations as well as Pd/Ag terminations. Available in 100G and 1000G containers.
Genuine MacDermid Alpha Micromax Imported Stock & Technical Support
We maintain stable inventory of authentic MacDermid Alpha Micromax 2110 resistor paste. Factory-original TDS and batch-specific COA can be provided upon request for your hybrid circuit projects.
Request Sample, TDS & Quotation
Complete TDS, COA, and regulatory documentation available
Key Features of MacDermid Alpha Micromax 2110
- Exceptional TCR performance — ±50 ppm/°C hot and cold TCR, significantly better than conventional pastes
- Ultra-low noise ≤-35 dB — exceptional signal integrity for precision analog and sensitive sensor applications
- 8-12 Ω/sq sheet resistivity — ideal for standard-ohm hybrid circuit applications
- Fast 30-minute firing profile — 10-minute peak at 850°C for high-throughput production
- Thin print capability — 16-20 μm dried film thickness with 325 mesh screens
- No blend breaks — fully blendable from 1Ω to 10MΩ/sq for design flexibility
- Excellent ESD stability — ≤0.1% ΔR under ESD testing (0.8mm×0.8mm@5kV)
- Flexible termination options — compatible with Micromax 5164N Pt/Ag and Pd/Ag terminations
Primary Applications
- Standard-ohm hybrid circuits — 8-12 Ω/sq range for versatile circuit designs
- Precision analog and instrumentation circuits — exceptional ±50 ppm/°C TCR for temperature-critical applications
- Low-noise sensor signal conditioning — ≤-35 dB noise for sensitive sensor signal chains
- Medical monitoring and diagnostic equipment — stable, low-noise components for sensitive medical electronics
Full Technical Specifications
| Property | Typical Value | Test / Reference |
| Product Type | Thick film resistor paste | — |
| Application | Standard-ohm hybrid circuits, precision analog circuits | — |
| Blendable Series | 2100 Series | No blend breaks 1Ω-10MΩ/sq |
| Packaging Specification | 100G, 1000G | Standard packaging |
| Resistivity Range | 8-12 Ω/sq | — |
| Recommended Mesh | 325 mesh | Stainless steel |
| Emulsion Thickness | 5-10 μm | — |
| Recommended Film Thickness | 16-20 μm | Dried thickness |
| Drying Temperature | 150°C | — |
| Drying Time | 10 min | — |
| Firing Peak Temperature | 850°C | 10 min at peak, 30 min total |
| Hot TCR (25-70°C) | -50 to 50 ppm/°C | Exceptional performance |
| Cold TCR (0-25°C) | -50 to 50 ppm/°C | Exceptional performance |
| TCR Length Effect | ≤40 ppm | 0.3mm vs 0.8mm length |
| TCR Firing Sensitivity | ≤1 ppm/°C | 825-875°C variation |
| Noise | ≤-35 dB | Quan-Tech, untrimmed |
| Electrostatic Discharge (ESD) | ≤0.1% ΔR | 0.8mm×0.8mm@5kV |
| Termination Compatibility | Micromax 5164N Pt/Ag or Pd/Ag conductor | High silver terminations |
| Substrate Compatibility | 96% alumina | — |
| Encapsulant | Glass encapsulant compatible at 500-560°C | — |
| Shelf Life | 6 months in unopened containers | — |
| Storage Temperature | 5-30°C | — |
Note: All listed values are typical and may vary by batch. Independent qualification testing is required prior to production use.
Recommended Processing Conditions
| Parameter | Recommended Value |
| Mixing Prior to Use | Slow gentle hand-stirring with clean spatula, 0.5-1 minute |
| Optimal Printing Temperature | 20-23°C |
| Screen Mesh | 325 mesh stainless steel |
| Emulsion Thickness | 5-10 μm |
| Dried Film Thickness | 16-20 μm |
| Leveling Time | 5-10 minutes at room temperature |
| Drying Temperature | 150°C |
| Drying Time | 10 minutes |
| Firing Peak Temperature | 850°C |
| Total Firing Cycle | 30 minutes (10 min at peak) |
| Firing Atmosphere | Air |
| Substrate | 96% alumina |
| Termination | Micromax 5164N Pt/Ag or Pd/Ag conductor |
Handling and Storage Recommendations
| Storage Rules | Store in tightly sealed containers in clean, stable environment at 5-30°C. |
| Shelf Life | 6 months in unopened containers from date of shipment. |
| Pre-use Preparation | Thoroughly mix prior to use. Some settling may occur during storage. |
| Thinning | Not normally required; use Micromax 8250 thinner sparingly for evaporative losses. |
Official Technical Documentation
| Document Type | Document Introduction | Document Request |
| TDS | MacDermid Alpha Micromax 2110 original factory technical data sheet | Request TDS |
| COA | Batch-specific certificate of analysis | Request COA |
| SDS | Safety Data Sheet for handling and storage | Request SDS |
Frequently Asked Questions
What is MacDermid Alpha Micromax 2110?
Micromax 2110 is a standard-ohm low-noise resistor paste from the 2100 Series, offering 8-12 Ω/sq resistivity with ≤-35 dB noise and exceptional ±50 ppm/°C TCR for hybrid circuit applications.
What is the resistivity range of Micromax 2110?
Micromax 2110 provides a sheet resistivity of 8-12 Ω/sq for standard-ohm hybrid circuit applications.
What is the TCR performance of Micromax 2110?
Micromax 2110 delivers exceptional TCR with both hot and cold TCR of -50 to 50 ppm/°C — significantly better than conventional pastes.
What is the noise performance of Micromax 2110?
Micromax 2110 delivers ultra-low noise of ≤-35 dB, ideal for precision analog and sensitive signal applications.
What is the firing cycle for Micromax 2110?
A fast 30-minute firing cycle with a 10-minute peak hold at 850°C.
What mesh screen is recommended for Micromax 2110?
Micromax 2110 is optimized for 325 mesh stainless steel screens with 5-10 μm emulsion thickness.
What packaging options are available for Micromax 2110?
Standard 100G and 1000G containers. Bulk supply options are available upon request.
Get MacDermid Alpha Micromax 2110 Bulk Pricing and Technical Support
We supply authentic MacDermid Alpha Micromax 2110 resistor paste for hybrid circuit applications. Contact our team for bulk quotations, sample availability, technical documentation, and application support.
Inquire Bulk Price & Technical Support
Disclaimer: All technical data on this page are for general guidance only and are not product specifications. Buyers must carry out independent trials and verify suitability before bulk ordering. Actual values may vary between production lots.
