描述
NORYL ZM3242 Resin is a 30% mineral reinforced blend of polyphenylene ether (PPE) and high impact polystyrene (HIPS), manufactured by SABIC. This injection moldable grade exhibits super low warpage and contains non-brominated, non-chlorinated flame retardant with a UL94 flame rating of V-1 at 1.2mm.
NORYL ZM3242 Resin offers an excellent balance of dimensional stability, good processability, and low specific gravity. The 30% mineral reinforcement provides enhanced stiffness and strength while maintaining super low warpage characteristics. This product contains mold release and does not contain PFAS intentionally added during the manufacturing process.
This material is an excellent candidate for consumer electronic and document handling applications. It is commercially active in the Asia Pacific region. Physical property data is determined using test methods established by ASTM International, the globally recognized standards organization.
For more NORYL grades and technical information, please visit our PPO/PPE product page.
Key Features of NORYL ZM3242 Resin
-
30% Mineral Reinforced – Provides enhanced stiffness, strength, and dimensional stability while maintaining low warpage
-
Super Low Warpage – Minimizes deformation during processing and use for precision part geometry
-
Halogen-Free Flame Retardant – Non-brominated, non-chlorinated flame retardant system
-
UL94 V-1 Rated – V-1 at 1.2mm thickness
-
Excellent Dimensional Stability – Low shrinkage (0.4% flow, 3.2mm) for precise part geometry
-
Good Processability – Optimized for injection molding with excellent flow characteristics
-
Mold Release – Contains mold release for efficient production and demolding
-
Low Specific Gravity – Specific gravity of 1.35
-
Hydrolytic Stability – Resists degradation in wet environments
-
Good Impact Strength – Izod impact, notched of 23 J/m at 23°C
-
High Stiffness – Flexural modulus of 5,770–5,780 MPa
-
Good Chemical Resistance – Good resistance to many cleaning agents and acids
-
No PFAS Intentionally Added – Compliant with environmental regulations
-
Injection Moldable – Suitable for standard injection molding processes
Typical Applications for NORYL ZM3242 Resin
| Industry | Typical Components & Considerations |
|---|---|
| Consumer Electronics | Mobile phones, computers, tablets – super low warpage, dimensional stability, UL94 V-1 |
| Document Handling | Printer components, copier parts, document feeders – low warpage, dimensional stability, flame retardancy |
| Electrical & Electronics | Indoor electrical enclosures, housings – UL94 V-1, halogen-free flame retardant, low warpage |
| Office Equipment | Computer housings, chassis – dimensional stability, flame retardancy |
Typical Properties of NORYL ZM3242 Resin
| Property | Value | Test Method |
|---|---|---|
| Physical | ||
| Specific Gravity | 1.35 | ASTM D792 |
| Mold Shrinkage, Flow (3.2mm) | 0.4% | SABIC Method |
| Melt Flow Rate (300°C/2.16kg) | 27 g/10min | ASTM D1238 |
| Mechanical (ASTM) | ||
| Tensile Stress, Break (Type I, 5 mm/min) | 65 MPa | ASTM D638 |
| Tensile Strain, Break (Type I, 5 mm/min) | 6% | ASTM D638 |
| Flexural Stress, Yield (1.3 mm/min, 50 mm span) | 104 MPa | ASTM D790 |
| Flexural Modulus (1.3 mm/min, 50 mm span) | 5,770 – 5,780 MPa | ASTM D790 |
| Impact (ASTM) | ||
| Izod Impact, Notched (23°C) | 23 J/m | ASTM D256 |
| Thermal (ASTM) | ||
| HDT, 1.82 MPa (6.4mm, unannealed) | 110°C | ASTM D648 |
| CTE, Flow (-40°C to 40°C) | 4.1E-05 1/°C | ASTM E831 |
| CTE, X-Flow (-40°C to 40°C) | 5.1E-05 1/°C | ASTM E831 |
| UL RTI Electrical | 65°C | UL 746B |
| UL RTI Mechanical with Impact | 65°C | UL 746B |
| UL RTI Mechanical without Impact | 65°C | UL 746B |
| Flammability | ||
| Flame Rating (1.2mm) | V-1 | UL 94 |
| UL Yellow Card | E207780-309727 | UL |
| Processing | ||
| Drying Temperature | 90 – 100°C | SABIC Method |
| Drying Time | 2 – 4 hours | SABIC Method |
| Rear – Zone 1 Temperature | 260 – 280°C | SABIC Method |
| Middle – Zone 2 Temperature | 270 – 290°C | SABIC Method |
| Front – Zone 3 Temperature | 280 – 300°C | SABIC Method |
| Nozzle Temperature | 280 – 300°C | SABIC Method |
| Melt Temperature | 280 – 300°C | SABIC Method |
| Mold Temperature | 70 – 90°C | SABIC Method |
Important Notes on Typical Data:
Values listed are typical and sourced from manufacturer data sheets. They do not constitute binding product specification.
Batch-to-batch deviations may exist. For critical applications, validate performance with batch-specific COA certificate.
Final performance depends on processing conditions and part design.
Manufacturer official TDS shall serve as definitive technical reference. Request the latest official TDS from our sales team.
Processing Guidelines for NORYL ZM3242 Resin
| Step | Process |
|---|---|
| Processing Method | Injection molding |
| Drying Temperature | 90 – 100°C |
| Drying Time | 2 – 4 hours |
| Rear – Zone 1 Temperature | 260 – 280°C |
| Middle – Zone 2 Temperature | 270 – 290°C |
| Front – Zone 3 Temperature | 280 – 300°C |
| Nozzle Temperature | 280 – 300°C |
| Melt Temperature | 280 – 300°C |
| Mold Temperature | 70 – 90°C |
| Storage | Store in original, sealed packaging in a cool, dry place away from direct sunlight |
Critical Processing Warnings:
Injection Molding: NORYL ZM3242 is specifically designed for injection molding.
Drying: Proper drying is critical to prevent hydrolysis and achieve optimal mechanical properties. Dry at 90–100°C for 2–4 hours.
Mineral Reinforcement: This grade contains 30% mineral reinforcement, which provides super low warpage and dimensional stability. Processing adjustments may be required for optimal surface finish.
UL Compliance: This grade carries a UL94 V-1 rating at 1.2mm thickness. UL94 V-1 rating is maintained from 1.10mm to 3.00mm thickness. Ensure processing conditions maintain compliance.
PFAS-Free: This product does not contain PFAS intentionally added during the manufacturing process.
Storage: Store in original, sealed packaging in a cool, dry place away from direct sunlight.
Related Products for NORYL ZM3242 Resin
Explore Engineering Plastics – Browse all engineering plastic materials
About Our Company – Learn more about our supply capabilities and quality assurance
Technical Documents for NORYL ZM3242 Resin
| Document Type | Description & Source |
|---|---|
| Manufacturer Official TDS | Complete physical, thermal, and mechanical properties of NORYL ZM3242 |
| Manufacturer Official SDS | GHS-compliant safety documentation |
| COA (Certificate of Analysis) | Batch-specific quality certification |
| UL Yellow Card | E207780-309727 – UL safety certification |
Request any document above by:
Email: ruiqingchem@gmail.com
Online form: Our contact page
We reply within one working business day. Please clearly state product (NORYL ZM3242) and document type you require.
FAQ about NORYL ZM3242 Resin
Q1: What is NORYL ZM3242?
A: NORYL ZM3242 is a 30% mineral reinforced blend of polyphenylene ether (PPE) and high impact polystyrene (HIPS) from SABIC. It is an injection moldable grade exhibiting super low warpage with non-halogenated flame retardancy and UL94 V-1 rating at 1.2mm.
Q2: What are the key features of NORYL ZM3242?
A: 30% mineral reinforcement, super low warpage, halogen-free flame retardancy (UL94 V-1 at 1.2mm), excellent dimensional stability, good processability, mold release, low specific gravity (1.35), high stiffness (flexural modulus 5,770–5,780 MPa), and No PFAS intentionally added.
Q3: What are the typical applications for NORYL ZM3242?
A: Consumer electronic housings, document handling equipment, printer components, indoor electrical enclosures, and office equipment requiring low warpage and flame retardancy.
Q4: What is the flame rating of NORYL ZM3242?
A: UL94 V-1 at 1.2mm thickness. UL94 V-1 rating is maintained from 1.10mm to 3.00mm thickness.
Q5: Is NORYL ZM3242 halogen-free?
A: Yes, it contains non-brominated, non-chlorinated flame retardant.
Q6: Is NORYL ZM3242 PFAS-free?
A: Yes, this product does not contain PFAS intentionally added during the manufacturing process.
Q7: What is the recommended processing method for NORYL ZM3242?
A: Injection molding. Dry at 90–100°C for 2–4 hours. Melt temperature: 280–300°C. Mold temperature: 70–90°C.
Q8: What is the specific gravity of NORYL ZM3242?
A: The specific gravity is 1.35.
Q9: What is the UL Yellow Card number for NORYL ZM3242?
A: E207780-309727.
Q10: What regions is NORYL ZM3242 available in?
A: Asia Pacific.
CTA (Call to Action)
Ready to order NORYL ZM3242?
To get a precise quotation and professional technical support, please share:
-
Required quantity (kg)
-
Destination port or delivery address
-
Target application (consumer electronics, document handling, indoor enclosures, etc.)
-
Document requirement (TDS, SDS, COA, UL docs, etc.)
Sample Policy:
-
Samples are for laboratory validation tests only, not for production use.
-
Buyer bears international sample-shipping freight.
-
If bulk-product performance deviates from sample reference, manufacturer official TDS serves as the authoritative benchmark.
Take action now:
-
📧 Email Us – ruiqingchem@gmail.com
-
📝 Send Inquiry – Use our quick inquiry form
-
💬 Live Chat – Click the bottom-right chat widget to speak directly with our team
After-Sales Support
| Service | Details |
|---|---|
| Quality Inspection Period | All quality-related claims must be submitted within 7 working days after delivery, supported by test data and photographic evidence. |
| Return / Exchange Policy | Confirmed product defects caused by our side trigger replacement or refund. Terms and conditions apply. |
| Logistics Damage | Report shipping damage directly to carrier immediately upon goods receipt. We assist with claim-document preparation. |
| Technical Support | Remote technical guidance available. On-site troubleshooting can be arranged upon special request. |
| Export Documentation | We supply commercial invoice, packing list, bill of lading, COA, and additional compliance certificates on request. |
Disclaimer
DISCLAIMER: All technical data is referenced from original manufacturer typical values for NORYL ZM3242. Our company acts as authorized distributor/trader rather than original manufacturer. Final performance depends on processing conditions and part design. Buyers shall independently validate product suitability for individual applications. Our firm bears no liability for product failure caused by improper processing or improper usage. Always reference the latest manufacturer official TDS of NORYL ZM3242 as the definitive specification.
