描述
NORYL SE1GFN1 Resin is a 10% glass fiber reinforced blend of polyphenylene ether (PPE) and high impact polystyrene (HIPS), manufactured by SABIC. This injection moldable grade contains non-brominated, non-chlorinated flame retardant and carries a UL94 flame rating of V-1 at 1.5mm, along with a UL746C Outdoor Suitability rating of F1 and RTI of 110°C.
This product exhibits high heat resistance, good dielectric strength, dimensional stability, hydrolytic stability, and very low moisture absorption. The 10% glass reinforcement provides enhanced stiffness and strength while maintaining low warpage and low shrinkage (0.3–0.5% flow). This grade is PFAS-free (AMR and EUR sourced only) and commercially active in the Americas, Europe, and Asia. Physical property data is determined using test methods established by UL, the globally recognized safety certification organization. UL Yellow Card: E121562.
For more NORYL grades and technical information, please visit our PPO/PPE product page.
Key Features of NORYL SE1GFN1 Resin
-
10% Glass Fiber Reinforced – Provides enhanced stiffness, strength, and dimensional stability
-
Halogen-Free Flame Retardant – Non-brominated, non-chlorinated flame retardant system
-
UL94 V-1 Rated – V-1 from 0.80mm to 6.00mm
-
UL746C F1 Outdoor Suitability – Suitable for outdoor exposure with UV and weather resistance
-
High Heat Resistance – HDT of 131°C at 1.82 MPa (6.4mm) ; Vicat softening temperature of 140–147°C
-
Good Dielectric Strength – Volume resistivity of 1×10¹⁵ Ω·cm
-
High Stiffness – Flexural modulus of 3,990 MPa (ASTM D790)
-
Good Mechanical Strength – Tensile strength at break of 74 MPa
-
Good Impact Resistance – Notched Izod impact of 96 J/m at 23°C
-
Low Warpage & Dimensional Stability – Shrinkage of 0.3–0.5% (flow, 3.2mm)
-
Very Low Moisture Absorption – Maintains properties in humid environments
-
Hydrolytic Stability – Resists degradation in wet environments
-
Low Specific Gravity – Density of 1.16 g/cm³ (1160 kg/m³)
-
PFAS-Free – No PFAS intentionally added (AMR and EUR sourced)
-
RoHS Compliant – Meets global environmental standards
-
Injection Moldable – Suitable for standard injection molding processes
Typical Applications for NORYL SE1GFN1 Resin
| Industry | Typical Components & Considerations |
|---|---|
| Electrical & Electronics | Indoor and outdoor electrical enclosures, housings, connectors – UL94 V-1, UL746C F1, good dielectric strength |
| Appliances | Appliance internals – heat resistance, flame retardancy, dimensional stability |
| Automotive EV | Electric vehicle components – high heat resistance, hydrolytic stability |
| Energy | Bio-energy applications – flame retardant, dimensional stability |
| Industrial | Industrial components requiring outdoor durability – UL746C F1, low warpage |
| Drones | Drone components – lightweight, flame retardant, dimensional stability |
Typical Properties of NORYL SE1GFN1 Resin
| Property | Value | Test Method |
|---|---|---|
| Physical | ||
| Density / Specific Gravity | 1.16 g/cm³ (1160 kg/m³) | ASTM D792 |
| Mold Shrinkage, Flow (3.2mm) | 0.3 – 0.5% | SABIC Method |
| Mechanical (ASTM) | ||
| Tensile Strength at Break | 74 MPa | ASTM D638 |
| Elongation at Break | 5% | ASTM D638 |
| Flexural Modulus | 3,990 MPa | ASTM D790 |
| Hardness, Rockwell L | 104 | ASTM D785 |
| Impact (ASTM) | ||
| Notched Izod Impact (23°C, 1/8 in) | 96 J/m | ASTM D256 |
| Notched Izod Impact (-40°C, 1/8 in) | 69 J/m | ASTM D256 |
| Thermal (ASTM) | ||
| HDT, 1.82 MPa (6.4mm, unannealed) | 131°C | ASTM D648 |
| Vicat Softening Temperature (Rate B/50) | 140 – 147°C | ASTM D1525 |
| UL RTI Electrical | 110°C | UL 746B |
| UL RTI Mechanical with Impact | 110°C | UL 746B |
| UL RTI Mechanical without Impact | 110°C | UL 746B |
| Electrical (ASTM) | ||
| Volume Resistivity | 1×10¹⁵ Ω·cm | ASTM D257 |
| Dielectric Constant (60 Hz / 1 MHz) | 3.0 | ASTM D150 |
| Dissipation Factor (60 Hz) | 0.0017 | ASTM D150 |
| Dissipation Factor (1 MHz) | 0.0016 | ASTM D150 |
| Flammability | ||
| Flame Rating (0.80 – 6.00 mm) | V-1 | UL 94 |
| UL746C Outdoor Suitability | F1 | UL 746C |
| UL Yellow Card | E121562 | UL |
| Processing | ||
| Drying Temperature | 105 – 110°C | SABIC Method |
| Drying Time | 3 – 4 hours | SABIC Method |
| Maximum Moisture Content | ≤ 0.02% | SABIC Method |
| Melt Temperature | 280 – 310°C | SABIC Method |
| Mold Temperature | 75 – 105°C | SABIC Method |
Important Notes on Typical Data:
Values listed are typical and sourced from manufacturer data sheets. They do not constitute binding product specification.
Batch-to-batch deviations may exist. For critical applications, validate performance with batch-specific COA certificate.
Final performance depends on processing conditions and part design.
Manufacturer official TDS shall serve as definitive technical reference. Request the latest official TDS from our sales team.
Processing Guidelines for NORYL SE1GFN1 Resin
| Step | Process |
|---|---|
| Processing Method | Injection molding |
| Drying Temperature | 105 – 110°C |
| Drying Time | 3 – 4 hours |
| Maximum Moisture Content | ≤ 0.02% |
| Zone 1 Temperature | 250 – 300°C |
| Zone 2 Temperature | 260 – 305°C |
| Zone 3 Temperature | 270 – 310°C |
| Melt Temperature | 280 – 310°C |
| Mold Temperature | 75 – 105°C |
| Back Pressure | 0.3 – 0.7 MPa |
| Screw Speed | 20 – 100 rpm |
| Storage | Store in original, sealed packaging in a cool, dry place away from direct sunlight |
Critical Processing Warnings:
Injection Molding: This grade is specifically designed for injection molding .
Drying: Proper drying is critical to prevent hydrolysis and achieve optimal mechanical properties. Dry at 105–110°C for 3–4 hours .
Glass Reinforcement: This grade contains 10% glass fiber, which may require processing adjustments for optimal surface finish and fiber orientation.
UL Compliance: This grade carries a UL94 V-1 rating from 0.80mm to 6.00mm . Ensure processing conditions maintain compliance.
UL746C F1 Rating: This grade is UL746C F1 rated for outdoor suitability .
PFAS-Free: This product does not contain PFAS intentionally added (AMR and EUR sourced) .
Storage: Store in original, sealed packaging in a cool, dry place away from direct sunlight.
Related Products for NORYL SE1GFN1 Resin
Explore Engineering Plastics – Browse all engineering plastic materials
About Our Company – Learn more about our supply capabilities and quality assurance
Technical Documents for NORYL SE1GFN1 Resin
| Document Type | Description & Source |
|---|---|
| Manufacturer Official TDS | Complete physical, thermal, and mechanical properties of NORYL SE1GFN1 |
| Manufacturer Official SDS | GHS-compliant safety documentation |
| COA (Certificate of Analysis) | Batch-specific quality certification |
| UL Yellow Card | E121562 – UL safety certification |
Request any document above by:
Email: ruiqingchem@gmail.com
Online form: Our contact page
We reply within one working business day. Please clearly state product (NORYL SE1GFN1) and document type you require.
FAQ about NORYL SE1GFN1 Resin
Q1: What is NORYL SE1GFN1?
A: This grade is a 10% glass fiber reinforced blend of PPE and HIPS from SABIC . It is an injection moldable grade with non-halogenated flame retardancy, UL94 V-1 rating, UL746C F1 outdoor suitability, high heat resistance, good dielectric strength, dimensional stability, hydrolytic stability, and very low moisture absorption .
Q2: What are the key features of this grade?
A: 10% glass reinforcement, halogen-free flame retardancy (UL94 V-1 from 0.80–6.00mm), UL746C F1 outdoor rating, RTI of 110°C, HDT of 131°C at 1.82 MPa, Vicat of 140–147°C, flexural modulus of 3,990 MPa, tensile strength of 74 MPa, low warpage, low shrinkage (0.3–0.5%), PFAS-free, and RoHS compliant.
Q3: What are the typical applications for this grade?
A: Indoor and outdoor electrical enclosures, housings, connectors, appliance internals, automotive EV components, bio-energy applications, and drone components .
Q4: What is the flame rating of this grade?
A: UL94 V-1 from 0.80mm to 6.00mm .
Q5: Is this grade suitable for outdoor use?
A: Yes, this grade carries a UL746C outdoor suitability rating of F1 .
Q6: Is this grade halogen-free?
A: Yes, it contains non-brominated, non-chlorinated flame retardant .
Q7: Is this grade PFAS-free?
A: Yes, this product does not contain PFAS intentionally added (AMR and EUR sourced) .
Q8: What is the recommended processing method for this grade?
A: Injection molding. Dry at 105–110°C for 3–4 hours (moisture ≤ 0.02%). Melt temperature: 280–310°C. Mold temperature: 75–105°C .
Q9: What is the UL Yellow Card number for this grade?
A: E121562 .
Q10: What regions is this grade available in?
A: Americas, Europe (Central & Eastern, Western), and Asia .
CTA (Call to Action)
Ready to order NORYL SE1GFN1?
To get a precise quotation and professional technical support, please share:
-
Required quantity (kg)
-
Destination port or delivery address
-
Target application (electrical enclosures, connectors, appliance internals, etc.)
-
Color requirement
-
Document requirement (TDS, SDS, COA, UL docs, etc.)
Sample Policy:
-
Samples are for laboratory validation tests only, not for production use.
-
Buyer bears international sample-shipping freight.
-
If bulk-product performance deviates from sample reference, manufacturer official TDS serves as the authoritative benchmark.
Take action now:
-
📧 Email Us – ruiqingchem@gmail.com
-
📝 Send Inquiry – Use our quick inquiry form
-
💬 Live Chat – Click the bottom-right chat widget to speak directly with our team
After-Sales Support
| Service | Details |
|---|---|
| Quality Inspection Period | All quality-related claims must be submitted within 7 working days after delivery, supported by test data and photographic evidence. |
| Return / Exchange Policy | Confirmed product defects caused by our side trigger replacement or refund. Terms and conditions apply. |
| Logistics Damage | Report shipping damage directly to carrier immediately upon goods receipt. We assist with claim-document preparation. |
| Technical Support | Remote technical guidance available. On-site troubleshooting can be arranged upon special request. |
| Export Documentation | We supply commercial invoice, packing list, bill of lading, COA, and additional compliance certificates on request. |
Disclaimer
DISCLAIMER: All technical data is referenced from original manufacturer typical values for NORYL SE1GFN1. Our company acts as authorized distributor/trader rather than original manufacturer. Final performance depends on processing conditions and part design. Buyers shall independently validate product suitability for individual applications. Our firm bears no liability for product failure caused by improper processing or improper usage. Always reference the latest manufacturer official TDS of NORYL SE1GFN1 as the definitive specification.
