描述
NORYL NH5120RC3 Resin is an unfilled, Post-Consumer Recycled (PCR) based injection moldable blend of polyphenylene ether (PPE) and polystyrene (PS), manufactured by SABIC. This grade contains a minimum of 30% PCR styrenic series resin content, representing a significant step toward sustainable material solutions.
NORYL NH5120RC3 Resin contains non-brominated, non-chlorinated flame retardant and carries a UL94 flame rating of V-1 at 1.5mm. Compared to incumbent fossil-based grades, it helps lower global warming potential (GWP) by approximately 10%. The material offers a good balance of heat resistance, flow, hydrolytic stability, low creep, and dimensional stability, with excellent mechanical property retention in tough outdoor environments.
NORYL NH5120RC3 is an excellent candidate for outdoor housings and enclosures, HVAC components, and photovoltaic/solar junction box applications. This product does not contain PFAS intentionally added during the manufacturing process. It is available globally and offered only in black.
For more NORYL grades and technical information, please visit our PPO/PPE product page.
Key Features of NORYL NH5120RC3 Resin
-
PCR-Based Sustainable Content – Contains ≥30% post-consumer recycled styrenic content; reduces GWP by 10% vs fossil-based grades
-
Halogen-Free Flame Retardant – Non-brominated, non-chlorinated system
-
UL94 V-1 Rated – V-1 at 1.5mm thickness
-
Good Balance of Heat and Flow – Excellent moldability for complex geometries
-
Outdoor Durability – Maintains mechanical properties in tough outdoor environments
-
Hydrolytic Stability – Resists degradation in wet environments
-
Low Creep Sensitivity – Maintains dimensional integrity under sustained load
-
Dimensional Stability – Precise part geometry with low warpage
-
Low Moisture Absorption – 0.06% moisture absorption at 23°C / 50% RH
-
Low Specific Gravity – Lightweight for various applications
-
Amorphous / Low Shrinkage – Low shrinkage characteristics
-
No PFAS Intentionally Added – Compliant with environmental regulations
-
Injection Moldable – Suitable for standard injection molding processes
Typical Applications for NORYL NH5120RC3 Resin
| Industry | Typical Components & Considerations |
|---|---|
| Electrical & Electronics | Outdoor electrical enclosures, housings – UL94 V-1, halogen-free, outdoor durability |
| HVAC | Heating/ventilation/air conditioning components – hydrolytic stability, heat resistance, dimensional stability |
| Renewable Energy | Photovoltaic/solar junction boxes – UL94 V-1, outdoor weatherability, hydrolytic stability |
| Consumer Electronics | Mobile phones, computers, tablets – low warpage, dimensional stability |
| Hygiene & Healthcare | Patient testing, electrical applications – flame retardant, dimensional stability |
| Energy Management | Energy management applications – hydrolytic stability, flame retardancy |
Typical Properties of NORYL NH5120RC3 Resin
| Property | Value | Test Method |
|---|---|---|
| Physical | ||
| Density / Specific Gravity | 1.08 g/cm³ | ASTM D792 |
| Moisture Absorption (23°C / 50% RH) | 0.06% | ISO 62 |
| Mold Shrinkage, Flow | 0.0026 mm/mm (0.26%) | ASTM D955 |
| Melt Flow Rate (280°C/5.0kg) | 13 g/10min | ASTM D1238 |
| Melt Volume Rate (280°C/5.0kg) | 13 cm³/10min | ISO 1133 |
| Mechanical (ASTM) | ||
| Tensile Modulus | 2500 MPa | ASTM D638 |
| Tensile Strength, Yield | 62 MPa | ASTM D638 |
| Tensile Strength, Break | 62 MPa | ASTM D638 |
| Tensile Nominal Strain, Break | 5% | ASTM D638 |
| Flexural Modulus | 2500 MPa | ASTM D790 |
| Flexural Stress, Yield | 98 MPa | ASTM D790 |
| Izod Impact Notched (1/8 in) | 82 J/m | ASTM D256 |
| Mechanical (ISO) | ||
| Tensile Modulus | 2500 MPa | ISO 527 |
| Tensile Stress, Yield | 58 MPa | ISO 527 |
| Tensile Stress, Break | 48 MPa | ISO 527 |
| Tensile Nominal Strain, Break | 7% | ISO 527 |
| Flexural Modulus | 2400 – 2500 MPa | ISO 178 |
| Flexural Stress, Break | 95 MPa | ISO 178 |
| Charpy Notched Impact (23°C) | 8 kJ/m² | ISO 179/1eA |
| Charpy Notched Impact (-30°C) | 5 kJ/m² | ISO 179/1eA |
| Izod Notched Impact (23°C, 4mm) | 8 kJ/m² | ISO 180/1A |
| Izod Notched Impact (-30°C, 4mm) | 5 kJ/m² | ISO 180/1A |
| Izod Unnotched Impact (23°C) | 90 kJ/m² | ISO 180/1U |
| Thermal | ||
| HDT, 1.82 MPa | Refer to full TDS | ASTM D648 / ISO 75 |
| Vicat Softening Temperature | Refer to full TDS | ASTM D1525 / ISO 306 |
| Flammability | ||
| Flame Rating (1.5mm) | V-1 | UL 94 |
| UL Yellow Card | E121562-631687 | UL |
Important Notes on Typical Data:
Values listed are typical and sourced from manufacturer data sheets. They do not constitute binding product specification.
Batch-to-batch deviations may exist. For critical applications, validate performance with batch-specific COA certificate.
Final performance depends on processing conditions and part design.
Manufacturer official TDS shall serve as definitive technical reference. Request the latest official TDS from our sales team.
Processing Guidelines for NORYL NH5120RC3 Resin
| Step | Process |
|---|---|
| Processing Method | Injection molding |
| Drying Temperature | Refer to full TDS |
| Drying Time | Refer to full TDS |
| Melt Temperature | Refer to full TDS |
| Mold Temperature | Refer to full TDS |
| Storage | Store in original, sealed packaging in a cool, dry place away from direct sunlight |
Critical Processing Warnings:
Injection Molding: NORYL NH5120RC3 is specifically designed for injection molding.
Drying: Proper drying is critical to prevent hydrolysis and achieve optimal mechanical properties.
UL Compliance: This grade carries a UL94 V-1 rating at 1.5mm thickness. Ensure processing conditions maintain compliance.
PCR Content: This grade contains ≥30% post-consumer recycled content. Processing conditions are similar to standard NORYL grades.
Storage: Store in original, sealed packaging in a cool, dry place away from direct sunlight.
Related Products
Explore Engineering Plastics – Browse all engineering plastic materials
About Our Company – Learn more about our supply capabilities and quality assurance
Technical Documents for NORYL NH5120RC3 Resin
| Document Type | Description & Source |
|---|---|
| Manufacturer Official TDS | Complete physical, thermal, and mechanical properties of NORYL NH5120RC3 |
| Manufacturer Official SDS | GHS-compliant safety documentation |
| COA (Certificate of Analysis) | Batch-specific quality certification |
| UL Yellow Card | E121562-631687 |
| Sustainability Brochure | Shrink Carbon Footprint with Sustainable NORYL™ Resins |
Request any document above by:
Email: ruiqingchem@gmail.com
Online form: Our contact page
We reply within one working business day. Please clearly state product (NORYL NH5120RC3) and document type you require.
FAQ about NORYL NH5120RC3 Resin
Q1: What is NORYL NH5120RC3?
A: NORYL NH5120RC3 is an unfilled, PCR-based blend of polyphenylene ether (PPE) and polystyrene (PS) from SABIC. It contains a minimum of 30% post-consumer recycled (PCR) styrenic content, making it a sustainable alternative to fossil-based grades.
Q2: What is the flame rating of NORYL NH5120RC3?
A: UL94 V-1 at 1.5mm thickness.
Q3: Is NORYL NH5120RC3 halogen-free?
A: Yes, it contains non-brominated, non-chlorinated flame retardant.
Q4: What are the key sustainability benefits of NORYL NH5120RC3?
A: It contains ≥30% post-consumer recycled content and helps lower global warming potential (GWP) by approximately 10% compared to incumbent fossil-based grades.
Q5: What are the typical applications for NORYL NH5120RC3?
A: Typical applications include outdoor electrical enclosures and housings, HVAC components, photovoltaic/solar junction boxes, consumer electronics, and energy management applications.
Q6: Does NORYL NH5120RC3 contain PFAS?
A: No, this product does not contain PFAS intentionally added during the manufacturing process.
Q7: What colors are available for NORYL NH5120RC3?
A: NORYL NH5120RC3 is available in black only.
Q8: What is the recommended processing method for NORYL NH5120RC3?
A: NORYL NH5120RC3 is designed for injection molding.
Q9: What is the UL Yellow Card number for NORYL NH5120RC3?
A: E121562-631687.
Q10: What is the lead time for orders?
A: Regular orders ship within 7-10 working days after payment confirmation. Large-volume orders can be negotiated separately.
CTA (Call to Action)
Ready to order NORYL NH5120RC3?
To get a precise quotation and professional technical support, please share:
-
Required quantity (kg)
-
Destination port or delivery address
-
Target application (outdoor enclosures, HVAC, solar junction boxes, etc.)
-
Document requirement (TDS, SDS, COA, UL docs, etc.)
Sample Policy:
-
Samples are for laboratory validation tests only, not for production use.
-
Buyer bears international sample-shipping freight.
-
If bulk-product performance deviates from sample reference, manufacturer official TDS serves as the authoritative benchmark.
Take action now:
-
📧 Email Us – ruiqingchem@gmail.com
-
📝 Send Inquiry – Use our quick inquiry form
-
💬 Live Chat – Click the bottom-right chat widget to speak directly with our team
After-Sales Support
| Service | Details |
|---|---|
| Quality Inspection Period | All quality-related claims must be submitted within 7 working days after delivery, supported by test data and photographic evidence. |
| Return / Exchange Policy | Confirmed product defects caused by our side trigger replacement or refund. Terms and conditions apply. |
| Logistics Damage | Report shipping damage directly to carrier immediately upon goods receipt. We assist with claim-document preparation. |
| Technical Support | Remote technical guidance available. On-site troubleshooting can be arranged upon special request. |
| Export Documentation | We supply commercial invoice, packing list, bill of lading, COA, and additional compliance certificates on request. |
Disclaimer
DISCLAIMER: All technical data is referenced from original manufacturer typical values for NORYL NH5120RC3. Our company acts as authorized distributor/trader rather than original manufacturer. Final performance depends on processing conditions and part design. Buyers shall independently validate product suitability for individual applications. Our firm bears no liability for product failure caused by improper processing or improper usage. Always reference the latest manufacturer official TDS of NORYL NH5120RC3 as the definitive specification.
