描述
NORYL NCF1010 Resin is a compound based on polyphenylene ether (PPE) and polystyrene (PS), manufactured by SABIC. This injection moldable grade contains 10% glass fiber, 10% carbon fiber, and 10% PTFE.
The synergistic combination of these three fillers delivers a unique balance of properties: the carbon fiber provides electrical conductivity (ESD-safe) and stiffness, the glass fiber enhances strength and dimensional stability, and the PTFE offers low friction and excellent wear resistance. NORYL NCF1010 exhibits high stiffness, good dimensional stability, hydrolytic stability, and very low moisture absorption. This material is an excellent candidate for applications requiring structural integrity combined with wear resistance, such as bearings, gears, sliding components, printer rollers, and ESD-safe electronic components. This product does not contain PFAS intentionally added during the manufacturing process.
For more NORYL grades and technical information, please visit our PPO/PPE product page.
Key Features of NORYL NCF1010 Resin
-
10% Glass Fiber + 10% Carbon Fiber + 10% PTFE Reinforced – Triple reinforcement system delivering structural strength, conductivity, and wear resistance
-
Wear Resistant & Low Friction – PTFE content provides excellent wear resistance and low coefficient of friction
-
High Stiffness – Flexural modulus of 7,610 MPa
-
ESD-Safe / Electrically Conductive – Carbon fiber provides electrical conductivity for static dissipation
-
Good Dimensional Stability – Precise part geometry with low warpage; mold shrinkage of 0.3–0.6% (flow) / 0.5–0.8% (transverse)
-
Very Low Moisture Absorption – 0.06% water absorption (23°C/24hrs)
-
High Strength – Flexural strength of 129 MPa and tensile strength of 97 MPa
-
Hydrolytic Stability – Resists degradation in wet environments
-
Structural and Wear Resistant – Designed for applications requiring both mechanical integrity and durability
-
Non-Halogenated – Environmentally friendly formulation
-
UL94-HB Rated – Flame rating of HB at 1.5mm thickness
-
UL Yellow Card – E45587-237058
-
Injection Moldable – Suitable for standard injection molding processes
Typical Applications for NORYL NCF1010 Resin
| Industry | Typical Components & Considerations |
|---|---|
| Mechanical Components | Bearings, gears, sliding components – wear resistance, low friction, high stiffness |
| Office Equipment | Printer rollers, copier rollers – wear resistance, low friction, dimensional stability |
| Electrical & Electronics | ESD-safe electronic components, connectors – static dissipation, dimensional stability |
| Automotive | Interior mechanical components – wear resistance, low friction |
| Industrial | Wear-resistant structural parts – high stiffness, durability |
| Consumer Electronics | Precision components – dimensional stability, wear resistance |
Typical Properties of NORYL NCF1010 Resin
| Property | Value | Test Method |
|---|---|---|
| Physical | ||
| Density / Specific Gravity | 1.21 g/cm³ (1,210 kg/m³) | ASTM D792 |
| Water Absorption (23°C/24hrs) | 0.06% | ASTM D570 |
| Mold Shrinkage, Flow (24 hrs) | 0.3 – 0.6% | ASTM D955 |
| Mold Shrinkage, Transverse (24 hrs) | 0.5 – 0.8% | ASTM D955 |
| Mechanical | ||
| Tensile Strength, Yield | 97 MPa | SABIC – Japan Method |
| Tensile Strain, Break | 7% | SABIC – Japan Method |
| Flexural Strength | 129 MPa | ASTM D790 |
| Flexural Modulus | 7,610 MPa | ASTM D790 |
| Impact | ||
| Izod Impact, Notched (23°C, 1/8 in) | 58 J/m | ASTM D256 |
| Thermal | ||
| HDT, 0.45 MPa (66 psi, 3.2mm, unannealed) | 134°C | ASTM D648 |
| CTE (-30°C to 30°C) | 0.000025 – 0.000045 1/°C | TMA |
| Flammability | ||
| Flame Rating (1.5mm) | HB | UL 94 |
| UL Yellow Card | E45587-237058 | UL |
Important Notes on Typical Data:
Values listed are typical and sourced from manufacturer data sheets. They do not constitute binding product specification.
Batch-to-batch deviations may exist. For critical applications, validate performance with batch-specific COA certificate.
Final performance depends on processing conditions and part design.
Manufacturer official TDS shall serve as definitive technical reference. Request the latest official TDS from our sales team.
Processing Guidelines for NORYL NCF1010 Resin
| Step | Process |
|---|---|
| Drying Temperature | 120°C |
| Drying Time | 4 hours |
| Maximum Moisture Content | < 0.02% |
| Rear – Zone 1 Temperature | 275 – 290°C |
| Middle – Zone 2 Temperature | 290 – 300°C |
| Front – Zone 3 Temperature | 300 – 310°C |
| Nozzle / Melt Temperature | 300 – 305°C |
| Mold Temperature | 80 – 110°C |
| Back Pressure | 0.2 – 0.3 MPa |
| Screw Speed | 30 – 60 rpm |
| Process | Injection Molding |
| Storage | Store in original, sealed packaging in a cool, dry place away from direct sunlight |
Critical Processing Warnings:
Drying: Proper drying is critical to prevent hydrolysis and achieve optimal mechanical properties. Dry at 120°C for 4 hours.
Injection Molding: NORYL NCF1010 is specifically designed for injection molding.
Filler Content: This grade contains 10% glass fiber, 10% carbon fiber, and 10% PTFE, which may require processing adjustments for optimal surface finish, fiber orientation, and wear properties.
UL Compliance: This grade carries a UL94-HB rating at 1.5mm thickness.
Storage: Store in original, sealed packaging in a cool, dry place away from direct sunlight.
Related Products
Explore Engineering Plastics – Browse all engineering plastic materials
About Our Company – Learn more about our supply capabilities and quality assurance
Technical Documents for NORYL NCF1010 Resin
| Document Type | Description & Source |
|---|---|
| Manufacturer Official TDS | Complete physical, thermal, and mechanical properties of NORYL NCF1010 |
| Manufacturer Official SDS | GHS-compliant safety documentation |
| COA (Certificate of Analysis) | Batch-specific quality certification |
| UL Yellow Card | E45587-237058 |
Request any document above by:
Email: ruiqingchem@gmail.com
Online form: Our contact page
We reply within one working business day. Please clearly state product (NORYL NCF1010) and document type you require.
FAQ about NORYL NCF1010 Resin
Q1: What is NORYL NCF1010?
A: NORYL NCF1010 is a compound based on PPE+PS resin containing 10% glass fiber, 10% carbon fiber, and 10% PTFE. It is an injection moldable grade designed for structural and wear-resistant applications.
Q2: What are the key features of NORYL NCF1010?
A: It offers triple reinforcement (glass fiber + carbon fiber + PTFE), high stiffness (flexural modulus 7,610 MPa), wear resistance, low friction, ESD-safe conductivity, low moisture absorption (0.06%), good dimensional stability, and hydrolytic stability.
Q3: What are the typical applications for NORYL NCF1010?
A: Typical applications include bearings, gears, sliding components, printer rollers, ESD-safe electronic components, and wear-resistant structural parts.
Q4: What is the surface resistivity of NORYL NCF1010?
A: NORYL NCF1010 is conductive/ESD-safe due to the carbon fiber content. For specific surface resistivity values, please refer to the official TDS.
Q5: What is the flame rating of NORYL NCF1010?
A: UL94-HB at 1.5mm thickness.
Q6: What is the recommended processing method for NORYL NCF1010?
A: NORYL NCF1010 is designed for injection molding.
Q7: What is the recommended drying condition for NORYL NCF1010?
A: Dry at 120°C for 4 hours prior to processing.
Q8: What is the recommended melt temperature for NORYL NCF1010?
A: 300 – 305°C.
Q9: What is the UL Yellow Card number for NORYL NCF1010?
A: E45587-237058.
Q10: What regions is NORYL NCF1010 available in?
A: Africa, Asia/Pacific, Central & Eastern Europe, Middle East & Central Asia, North America, South & Central America, and Western Europe.
Q11: What is the lead time for orders?
A: Regular orders ship within 7-10 working days after payment confirmation. Large-volume orders can be negotiated separately.
CTA (Call to Action)
Ready to order NORYL NCF1010?
To get a precise quotation and professional technical support, please share:
-
Required quantity (kg)
-
Destination port or delivery address
-
Target application (bearings, gears, printer rollers, ESD-safe components, etc.)
-
Document requirement (TDS, SDS, COA, UL docs, etc.)
Sample Policy:
-
Samples are for laboratory validation tests only, not for production use.
-
Buyer bears international sample-shipping freight.
-
If bulk-product performance deviates from sample reference, manufacturer official TDS serves as the authoritative benchmark.
Take action now:
-
📧 Email Us – ruiqingchem@gmail.com
-
📝 Send Inquiry – Use our quick inquiry form
-
💬 Live Chat – Click the bottom-right chat widget to speak directly with our team
After-Sales Support
| Service | Details |
|---|---|
| Quality Inspection Period | All quality-related claims must be submitted within 7 working days after delivery, supported by test data and photographic evidence. |
| Return / Exchange Policy | Confirmed product defects caused by our side trigger replacement or refund. Terms and conditions apply. |
| Logistics Damage | Report shipping damage directly to carrier immediately upon goods receipt. We assist with claim-document preparation. |
| Technical Support | Remote technical guidance available. On-site troubleshooting can be arranged upon special request. |
| Export Documentation | We supply commercial invoice, packing list, bill of lading, COA, and additional compliance certificates on request. |
Disclaimer
DISCLAIMER: All technical data is referenced from original manufacturer typical values for NORYL NCF1010. Our company acts as authorized distributor/trader rather than original manufacturer. Final performance depends on processing conditions and part design. Buyers shall independently validate product suitability for individual applications. Our firm bears no liability for product failure caused by improper processing or improper usage. Always reference the latest manufacturer official TDS of NORYL NCF1010 as the definitive specification.
