描述
NORYL IGN320 Resin is a 20% glass fiber reinforced blend of polyphenylene ether (PPE) and high impact polystyrene (HIPS), manufactured by SABIC. This injection moldable grade exhibits high heat resistance, high modulus, very low moisture absorption, and good dimensional stability. It offers hydrolytic stability, low creep sensitivity, good stiffness, and low warpage.
NORYL IGN320 Resin is an excellent candidate for automotive applications such as ignition coils where heat and high modulus are required. This product does not contain PFAS intentionally added during the manufacturing process. Physical property data is determined using test methods established by ASTM International, the globally recognized standards organization.
For more NORYL grades and technical information, please visit our PPO/PPE product page.
Key Features of NORYL IGN320 Resin
-
20% Glass Fiber Reinforced – Provides enhanced stiffness, strength, and dimensional stability
-
High Heat Resistance – HDT of 158°C at 1.82 MPa (3.2mm)
-
High Modulus – Tensile modulus of 6,260 MPa for excellent stiffness
-
Very Low Moisture Absorption – Maintains properties in humid environments
-
Good Dimensional Stability – Precise part geometry with low warpage
-
Hydrolytic Stability – Resists degradation in wet environments
-
Low Creep Sensitivity – Maintains dimensional integrity under sustained load
-
Good Stiffness – Flexural modulus of 5,720 MPa
-
Low Warpage – Minimizes deformation during processing and use
-
High Dielectric Strength – 33.9 kV/mm (in oil, 1.6mm)
-
Injection Moldable – Suitable for standard injection molding processes
-
RoHS Compliant – Meets global environmental standards
-
Non-UL Rated – Please verify with UL Yellow Card for specific ratings
-
No PFAS Intentionally Added – Compliant with environmental regulations
Typical Applications for NORYL IGN320 Resin
| Industry | Typical Components & Considerations |
|---|---|
| Automotive | Ignition coils – heat resistance, high modulus |
| Automotive | Underhood electronic components – thermal stability, dimensional stability |
| Automotive | Automotive electronics – high dielectric strength, heat resistance |
| Industrial | Electrical components – good electrical properties, dimensional stability |
| Drones | Structural components requiring high stiffness and low warpage |
Typical Properties of NORYL IGN320 Resin
| Property | Value | Test Method |
|---|---|---|
| Physical | ||
| Specific Gravity | 1.20 | ASTM D792 |
| Mold Shrinkage, Flow (3.2mm) | 0.1 – 0.3% | SABIC Method |
| Mold Shrinkage, X-Flow (3.2mm) | 0.2 – 0.4% | SABIC Method |
| Melt Flow Rate (300°C/5.0kg) | 12.8 g/10min | ASTM D1238 |
| Mechanical (ASTM) | ||
| Tensile Modulus (5 mm/min) | 6,260 MPa | ASTM D638 |
| Tensile Stress, Yield (Type I, 5 mm/min) | 108 MPa | ASTM D638 |
| Tensile Stress, Break (Type I, 5 mm/min) | 108 MPa | ASTM D638 |
| Tensile Strain, Break (Type I, 5 mm/min) | 2.4% | ASTM D638 |
| Flexural Modulus (1.3 mm/min, 50 mm span) | 5,720 MPa | ASTM D790 |
| Flexural Strength, Break (1.3 mm/min, 50 mm span) | 170 MPa | ASTM D790 |
| Impact | ||
| Notched Izod Impact (23°C) | 100 – 101 J/m | ASTM D256 |
| Unnotched Izod Impact (23°C) | 510 – 512 J/m | ASTM D4812 |
| Instrumented Dart Impact Total Energy (23°C) | 16 J | ASTM D3763 |
| Thermal | ||
| HDT, 1.82 MPa (3.2mm, unannealed) | 158°C | ASTM D648 |
| HDT, 0.45 MPa (3.2mm, unannealed) | 164°C | ASTM D648 |
| Vicat Softening Temperature (Rate B/50) | 175°C | ASTM D1525 |
| Electrical | ||
| Dielectric Strength (in oil, 1.6mm) | 33.9 kV/mm | ASTM D149 |
| Flammability | ||
| UL Rating | Non UL Rated | — |
Important Notes on Typical Data:
Values listed are typical and sourced from manufacturer data sheets. They do not constitute binding product specification.
Batch-to-batch deviations may exist. For critical applications, validate performance with batch-specific COA certificate.
Final performance depends on processing conditions and part design.
Manufacturer official TDS shall serve as definitive technical reference. Request the latest official TDS from our sales team.
Processing Guidelines for NORYL IGN320 Resin
| Step | Process |
|---|---|
| Drying Temperature | 110 – 120°C |
| Drying Time | 3 – 4 hours |
| Cumulative Drying Time | 8 hours |
| Maximum Moisture Content | < 0.02% |
| Rear – Zone 1 Temperature | 265 – 315°C |
| Middle – Zone 2 Temperature | 275 – 320°C |
| Front – Zone 3 Temperature | 290 – 325°C |
| Nozzle Temperature | 300 – 325°C |
| Melt Temperature | 300 – 325°C |
| Mold Temperature | Refer to full TDS |
| Back Pressure | 0.3 – 0.7 MPa |
| Screw Speed | Refer to full TDS |
| Process | Injection Molding |
| Storage | Store in original, sealed packaging in a cool, dry place away from direct sunlight |
Critical Processing Warnings:
Drying: Proper drying is critical to prevent hydrolysis and achieve optimal mechanical properties. Dry at 110–120°C for 3–4 hours.
Injection Molding: NORYL IGN320 is specifically designed for injection molding.
Storage: Store in original, sealed packaging in a cool, dry place away from direct sunlight.
Related Products
Explore Engineering Plastics – Browse all engineering plastic materials
About Our Company – Learn more about our supply capabilities and quality assurance
Technical Documents for NORYL IGN320 Resin
| Document Type | Description & Source |
|---|---|
| Manufacturer Official TDS | Complete physical, thermal, and mechanical properties of NORYL IGN320 |
| Manufacturer Official SDS | GHS-compliant safety documentation |
| COA (Certificate of Analysis) | Batch-specific quality certification |
Request any document above by:
Email: ruiqingchem@gmail.com
Online form: Our contact page
We reply within one working business day. Please clearly state product (NORYL IGN320) and document type you require.
FAQ about NORYL IGN320 Resin
Q1: What is NORYL IGN320?
A: NORYL IGN320 is a 20% glass fiber reinforced blend of polyphenylene ether (PPE) and high impact polystyrene (HIPS) from SABIC. It is an injection moldable grade with high heat resistance, high modulus, very low moisture absorption, good dimensional stability, hydrolytic stability, low creep sensitivity, good stiffness, and low warpage.
Q2: What are the key features of NORYL IGN320?
A: It offers 20% glass reinforcement, high heat resistance (HDT of 158°C at 1.82 MPa), high modulus (6,260 MPa tensile modulus), very low moisture absorption, good dimensional stability, hydrolytic stability, low creep sensitivity, good stiffness (5,720 MPa flexural modulus), low warpage, and high dielectric strength (33.9 kV/mm). It is Non-UL Rated and does not contain PFAS intentionally added.
Q3: What are the typical applications for NORYL IGN320?
A: Typical applications include automotive ignition coils, underhood electronic components, automotive electronics, industrial electrical components, and drone structural components.
Q4: What is the heat deflection temperature of NORYL IGN320?
A: The HDT at 1.82 MPa (3.2mm, unannealed) is 158°C. The HDT at 0.45 MPa (3.2mm, unannealed) is 164°C.
Q5: What is the Vicat softening temperature of NORYL IGN320?
A: The Vicat softening temperature (Rate B/50) is 175°C.
Q6: What is the tensile modulus of NORYL IGN320?
A: The tensile modulus at 5 mm/min is 6,260 MPa.
Q7: What is the recommended processing method for NORYL IGN320?
A: NORYL IGN320 is designed for injection molding.
Q8: What is the recommended drying condition for NORYL IGN320?
A: Dry at 110–120°C for 3–4 hours prior to processing.
Q9: What is the recommended melt temperature for NORYL IGN320?
A: 300 – 325°C.
Q10: Is NORYL IGN320 UL rated?
A: No, NORYL IGN320 is Non-UL Rated. Please verify with UL Yellow Card for specific ratings.
Q11: What regions is NORYL IGN320 available in?
A: It is available in the Americas (North America, South and Central America).
Q12: What is the lead time for orders?
A: Regular orders ship within 7-10 working days after payment confirmation. Large-volume orders can be negotiated separately.
CTA (Call to Action)
Ready to order NORYL IGN320?
To get a precise quotation and professional technical support, please share:
-
Required quantity (kg)
-
Destination port or delivery address
-
Target application (automotive ignition coils, underhood components, etc.)
-
Document requirement (TDS, SDS, COA, etc.)
Sample Policy:
-
Samples are for laboratory validation tests only, not for production use.
-
Buyer bears international sample-shipping freight.
-
If bulk-product performance deviates from sample reference, manufacturer official TDS serves as the authoritative benchmark.
Take action now:
-
📧 Email Us – ruiqingchem@gmail.com
-
📝 Send Inquiry – Use our quick inquiry form
-
💬 Live Chat – Click the bottom-right chat widget to speak directly with our team
After-Sales Support
| Service | Details |
|---|---|
| Quality Inspection Period | All quality-related claims must be submitted within 7 working days after delivery, supported by test data and photographic evidence. |
| Return / Exchange Policy | Confirmed product defects caused by our side trigger replacement or refund. Terms and conditions apply. |
| Logistics Damage | Report shipping damage directly to carrier immediately upon goods receipt. We assist with claim-document preparation. |
| Technical Support | Remote technical guidance available. On-site troubleshooting can be arranged upon special request. |
| Export Documentation | We supply commercial invoice, packing list, bill of lading, COA, and additional compliance certificates on request. |
Disclaimer
DISCLAIMER: All technical data is referenced from original manufacturer typical values for NORYL IGN320. Our company acts as authorized distributor/trader rather than original manufacturer. Final performance depends on processing conditions and part design. Buyers shall independently validate product suitability for individual applications. Our firm bears no liability for product failure caused by improper processing or improper usage. Always reference the latest manufacturer official TDS of NORYL IGN320 as the definitive specification.
