描述
ULTEM Resin SF2250 is a 20% glass fiber reinforced, super high flow polyetherimide (PEI) resin manufactured by SABIC. As an authorized distributor and trader, we supply genuine SABIC materials with full traceability.
This grade is specifically engineered for demanding thin-wall applications requiring exceptional flow and precision. The super high flow characteristics enable the molding of complex, miniature components with thin walls down to 0.2 mm using conventional injection molding equipment. The SF2250EPR variant additionally features internal mold release for improved demolding and processing efficiency.
With a glass transition temperature of 217°C and UL94 V-0 flame retardancy, SF2250 delivers excellent thermal stability, high strength, and dimensional precision. The material is widely adopted in semiconductor burn-in test sockets (BiTS) used for stress-testing integrated circuit chips, as well as connectors and other electronic components requiring miniaturization.
Key Features
-
20% glass fiber reinforced for high stiffness and strength
-
Super high flow for thin-wall and complex geometry molding
-
Internal mold release (EPR version) for improved demolding
-
UL94 V-0 flame retardant
-
High heat resistance with Tg of 217°C
-
Excellent dimensional stability
-
ECO conforming and RoHS compliant
-
Can withstand high-heat burn-in tests up to 150°C
Typical Applications
| Industry | Typical Components & Considerations |
|---|---|
| Semiconductor | Burn-in test sockets (BiTS), IC test sockets – withstands high-heat testing up to 150°C |
| Electrical & Electronics | Thin-wall connectors, electrical components, electronic material handling |
| 3D Printing | 3D printer components |
| Electrical Infrastructure | Electrical components and infrastructure |
| Industrial | Thin-wall industrial applications requiring high flow and precision |
Typical Properties
| Property | Typical Value | Unit | Test Method |
|---|---|---|---|
| Physical | |||
| Specific Gravity / Density | 1.44 | g/cm³ | ASTM D792 / ISO 1183 |
| Mold Shrinkage, Flow | 0.46 | % | SABIC Method |
| Mold Shrinkage, Transverse | 0.54 | % | SABIC Method |
| Melt Flow Rate (337°C/6.6kg) | 19.7 | g/10min | ASTM D1238 |
| Water Absorption (24 hrs) | 0.20 | % | ISO 62-1 |
| Moisture Absorption (50% RH) | 0.07 | % | 23°C / 50% RH |
| Mechanical | |||
| Tensile Modulus | 8,900 – 9,057 | MPa | ASTM D638 / ISO 527 |
| Tensile Strength (Break) | 145 – 157 | MPa | ASTM D638 / ISO 527 |
| Tensile Strain (Break) | 2.3 – 3.0 | % | ASTM D638 / ISO 527 |
| Flexural Modulus | 7,619 – 7,796 | MPa | ASTM D790 / ISO 178 |
| Flexural Stress (Yield) | 201 – 202 | MPa | ASTM D790 / ISO 178 |
| Impact | |||
| Izod Impact (Notched, 23°C) | 79.7 | J/m | ASTM D256 |
| Izod Impact (Unnotched, 23°C) | 368 | J/m | ASTM D4812 |
| Izod Impact (Notched, 23°C) | 8.8 | kJ/m² | ISO 180/1A |
| Charpy Impact (Notched, 23°C) | 8.5 | kJ/m² | ISO 179/1eA |
| Charpy Impact (Unnotched, 23°C) | 35 | kJ/m² | ISO 179/1eU |
| Thermal | |||
| Glass Transition Temperature (Tg) | 217 | °C | |
| HDT (1.82 MPa, 3.2mm) | 201 | °C | ASTM D648 |
| HDT (0.45 MPa, 3.2mm) | 207 | °C | ASTM D648 |
| HDT (1.80 MPa) | 203 | °C | ISO 75/Af |
| HDT (0.45 MPa) | 209 | °C | ISO 75/Bf |
| Vicat Softening Temp. (B/50) | 210 – 212 | °C | ASTM D1525 / ISO 306 |
| Flammability | |||
| UL 94 Flammability | V-0 | — | UL 94 |
Processing Guidelines
| Step | Process |
|---|---|
| Drying | 150°C for 4-6 hours (moisture <0.02%) |
| Melt Temperature | 350 – 400°C |
| Shot Size | 40 – 60% of cylinder capacity |
| Injection Molding | Standard injection molding equipment; super high flow enables thin-wall molding down to 0.2 mm |
| Regrind | Up to 20-25% with virgin material |
Critical Processing Warnings:
-
Drying: ULTEM SF2250 is hygroscopic and must be dried to <0.02% moisture before processing.
-
Super High Flow: This grade offers exceptional flow characteristics for thin-wall and complex geometry molding.
-
Internal Mold Release: The SF2250EPR variant contains internal mold release agents for improved demolding.
-
Melt Temperature: Recommended melt temperature range is 350-400°C. Avoid excessive residence times.
-
Thin-Wall Molding: Capable of molding thin walls down to 0.2 mm using conventional injection molding equipment.
Related Products
-
Explore PEI / Polyetherimide – Browse all ULTEM PEI resin options
-
Explore Engineering Plastics – Browse all engineering plastic materials
-
About Our Company – Learn more about our supply capabilities and quality assurance
Technical Documents
| Document Type | Description & Source |
|---|---|
| SABIC Official TDS | Complete physical, thermal, and mechanical properties of ULTEM SF2250 |
| SABIC Official SDS | GHS-compliant chemical safety documentation |
| UL Yellow Card | UL certification |
| ECO Compliance Declaration | ECO conforming certification |
| COA (Certificate of Analysis) | Batch-specific quality certification |
Request any document above by:
-
Email:
ruiqingchem@gmail.com -
Online form: Our contact page
We reply within one working business day. Please clearly state product (ULTEM SF2250) and document type you require.
FAQ
Q1: What is ULTEM SF2250 and what is it used for?
A: ULTEM SF2250 is a 20% glass fiber reinforced, super high flow PEI resin manufactured by SABIC. It is specifically engineered for thin-wall applications requiring exceptional flow and precision. It is widely used in semiconductor burn-in test sockets (BiTS), thin-wall connectors, 3D printer components, and electrical/industrial applications.
Q2: What is the difference between ULTEM SF2250 and SF2250EPR?
A: SF2250EPR is the variant with internal mold release, which improves demolding and processing efficiency. Both grades share the same 20% glass fiber reinforcement and super high flow characteristics.
Q3: What is the glass transition temperature of ULTEM SF2250?
A: The glass transition temperature (Tg) is 217°C.
Q4: What is the density of ULTEM SF2250?
A: The density is 1.44 g/cm³.
Q5: Is ULTEM SF2250 flame retardant?
A: Yes. ULTEM SF2250 is inherently flame retardant with UL94 V-0 rating.
Q6: What is the melt flow rate of ULTEM SF2250?
A: The Melt Flow Rate (MFR) is 19.7 g/10min at 337°C, 6.6kg.
Q7: What is the tensile strength of ULTEM SF2250?
A: Tensile strength at break is 145-157 MPa; tensile modulus is 8,900-9,057 MPa.
Q8: What is the recommended drying condition for ULTEM SF2250?
A: Dry at 150°C for 4-6 hours.
Q9: Is ULTEM SF2250 suitable for thin-wall applications?
A: Yes. ULTEM SF2250 is specifically developed for demanding thin-wall applications requiring exceptional flow and precision. It can achieve flow lengths down to 0.2 mm using conventional injection molding equipment.
Q10: What is the heat deflection temperature of ULTEM SF2250?
A: Heat deflection temperature is 201°C at 1.82 MPa (3.2mm) and 207°C at 0.45 MPa (3.2mm).
Q11: What is the lead time for orders?
A: Regular orders ship within 7-10 working days after payment confirmation. Large-volume or urgent orders can be negotiated separately.
CTA (Call to Action)
Ready to order ULTEM SF2250?
To get a precise quotation and professional technical support, please share:
-
Required quantity (kg)
-
Destination port or delivery address
-
Target application (semiconductor BiTS, thin-wall connectors, 3D printing, electrical, etc.)
-
Variant preference (SF2250 or SF2250EPR with internal mold release)
-
Document requirement (TDS, SDS, UL, COA, etc.)
Sample Policy:
-
Samples are for laboratory validation tests only, not for production use.
-
Buyer bears international sample-shipping freight.
-
If bulk-product performance deviates from sample reference, SABIC official TDS serves as the authoritative benchmark.
Take action now:
-
📧 Email Us –
ruiqingchem@gmail.com -
📝 Send Inquiry – Use our quick inquiry form
-
💬 Live Chat – Click the bottom-right chat widget to speak directly with our team
After-Sales Support
| Service | Details |
|---|---|
| Quality Inspection Period | All quality-related claims must be submitted within 7 working-days after delivery, supported by test data and photographic evidence. |
| Return / Exchange Policy | Confirmed product defects caused by our side trigger replacement or refund. Terms and conditions apply. |
| Logistics Damage | Report shipping damage directly to carrier immediately upon goods receipt. We assist with claim-document preparation. |
| Technical Support | Remote technical guidance available. On-site troubleshooting can be arranged upon special request. |
| Export Documentation | We supply commercial invoice, packing list, bill of lading, COA, and additional compliance certificates (e.g., UL, RoHS) on request. |
Disclaimer
DISCLAIMER: All technical data is referenced from original SABIC typical values for ULTEM SF2250. Our company acts as authorized distributor/trader rather than original manufacturer. Final performance depends on processing conditions, mold design, and part geometry. Buyers shall independently validate product suitability for individual applications. Our firm bears no liability for product failure caused by improper processing or improper usage. Always reference the latest SABIC official TDS of ULTEM SF2250 as the definitive specification.
