ULTEM 2210 – 20% Glass Fiber Reinforced PEI Resin with Enhanced Flow

ULTEM Resin 2210 is a 20% glass fiber reinforced, amorphous polyetherimide (PEI) engineering thermoplastic manufactured by SABIC. As an authorized distributor and trader, we supply genuine SABIC materials with full traceability. For more product options and company information, please visit our website at https://szrqchem.com/.

ULTEM 2210 is a 20% glass fiber reinforced grade featuring enhanced flow for easier processing and better mold filling. It delivers an outstanding balance of mechanical, thermal, and electrical properties with significantly enhanced stiffness. Key attributes include:

• 20% Glass Fiber Reinforcement – Provides high stiffness, strength, and dimensional stability compared to unreinforced grades

• Enhanced Flow – Improved flow characteristics for easier processing and better mold filling of complex parts

• High Heat Resistance – Glass transition temperature (Tg) of 217°C

• Inherent Flame Retardancy – UL94 V-0 (0.41mm) and 5VA (1.9mm) ratings without halogenated additives

• High Stiffness & Strength – Tensile modulus of 6,890 MPa; tensile strength of 139 MPa

• Excellent Dimensional Stability – Low creep sensitivity and low shrinkage (0.30-0.50%)

• Low Smoke & Toxicity – Inherently low smoke and toxicity; combustion products are no more toxic than wood

• Good Chemical Resistance – Resists automotive fluids, aircraft fluids, alcohols, acids, and weak aqueous solutions

• Good Metal Adhesion – Suitable for applications requiring metal bonding

• ECO Conforming – Meets environmental compliance standards

• Sustainable Option – ISCC+ certified renewable bio-based solutions available

Key Features of ULTEM 2210

• 20% Glass Fiber Reinforced – Provides significantly increased stiffness, strength, and dimensional stability compared to unreinforced grades; improved dimensional stability vs ULTEM 1000 series

• Enhanced Flow – Improved flow characteristics for easier processing and better mold filling of complex, thin-walled parts

• High Heat Resistance – Glass transition temperature of 217°C; heat deflection temperature of 211°C at 1.8 MPa; Vicat softening temperature of 225°C; UL RTI of 170°C

• Inherent Flame Retardancy – UL94 V-0 (0.41mm) and 5VA (1.9mm) ratings; limiting oxygen index of 47%

• High Mechanical Strength – Tensile modulus of 6,890 MPa; tensile strength at break of 139 MPa; flexural modulus of 6,890 MPa; flexural strength of 227 MPa; Rockwell hardness M114

• Excellent Dimensional Stability – Low mold shrinkage (0.30-0.50%); low creep sensitivity and low warpage

• Good Chemical Resistance – Resists automotive and aircraft fluids, aliphatic hydrocarbons, alcohols, acids, and weak aqueous solutions

• Hydrolytic Stability – Good resistance to moisture and hydrolysis

• Good Metal Adhesion – Suitable for applications requiring metal bonding

• Low Smoke & Low Toxicity – Inherently low smoke and toxicity; combustion products are no more toxic than wood

• ECO Conforming – Meets environmental compliance standards

• Sustainable Option – ISCC+ certified renewable bio-based solutions available

• Versatile Processing – Suitable for injection molding, extrusion, thermoforming, and blow molding

• Amorphous Structure – Provides excellent dimensional stability and transparency

• Food Contact Compliant – This material is food contact compliant in most jurisdictions – exceptions may exist, request a declaration for details

Typical Applications for ULTEM 2210

Typical Properties

Important Notes on Typical Data:

• Values listed are typical and sourced from SABIC official data sheets. They do not constitute binding product specification.

• Batch-to-batch deviations may exist. For critical applications, validate performance with batch-specific COA certificate.

• Final performance depends on processing conditions, mold design, and part geometry.

• SABIC official TDS shall serve as definitive technical reference. Request the latest official TDS from our sales team.

Processing Guidelines

Critical Processing Warnings:

• Drying: ULTEM 2210 is hygroscopic and must be dried to <0.02% moisture before processing. Dry at 149-150°C for 4-6 hours.

• Enhanced Flow: This grade offers improved flow characteristics for easier processing and better mold filling of complex parts.

• Melt Temperature: Recommended melt temperature range is 350-400°C. Avoid excessive residence times to prevent thermal degradation.

• Mold Temperature: Higher mold temperatures (135-165°C) improve flow and reduce residual stress.

• Gate Design: Use large gates and runners to minimize flow resistance and reduce molded-in stress.

• Regrind: Regrind can be used up to 20-25% with virgin material, provided it is clean and properly dried.

• Processing Methods: Suitable for injection molding, extrusion, thermoforming, and blow molding. Thin walls down to 0.2 mm possible using conventional injection molding equipment.

Related Products

• Explore PEI / Polyetherimide – Browse all ULTEM PEI resin options

• Explore Engineering Plastics – Browse all engineering plastic materials

• About Our Company – Learn more about our supply capabilities and quality assurance

Technical Documents

Request any document above by:

• Email: ruiqingchem@gmail.com

• Online form: Our contact page

We reply within one working business day. Please clearly state product (ULTEM 2210) and document type you require.

FAQ

Q1: What is ULTEM 2210 and what is it used for?
A: ULTEM 2210 is a 20% glass fiber reinforced polyetherimide (PEI) resin manufactured by SABIC with enhanced flow. It combines high heat resistance (Tg 217°C), inherent flame retardancy (UL94 V-0 & 5VA), and high stiffness. It is widely used in aerospace interiors, automotive under-hood applications, electrical/electronic components, medical devices, semiconductor equipment, and industrial components.

Q2: What is the difference between ULTEM 2200 and ULTEM 2210?
A: The key difference is that ULTEM 2210 offers enhanced flow compared to ULTEM 2200 (MFR 8.4 vs 6.0-6.5 g/10min), making it easier to process and fill complex molds. Both grades contain 20% glass fiber reinforcement and share similar mechanical, thermal, and electrical properties.

Q3: What is the glass fiber content of ULTEM 2210?
A: ULTEM 2210 contains 20% glass fiber reinforcement.

Q4: What is the glass transition temperature of ULTEM 2210?
A: The glass transition temperature (Tg) is 217°C.

Q5: What is the density of ULTEM 2210?
A: The density is 1.42 g/cm³.

Q6: Is ULTEM 2210 flame retardant?
A: Yes. ULTEM 2210 is inherently flame retardant with UL94 V-0 (0.41mm) and 5VA (1.9mm) ratings.

Q7: What is the tensile modulus of ULTEM 2210?
A: The tensile modulus is 6,890 MPa.

Q8: What processing methods can be used for ULTEM 2210?
A: ULTEM 2210 can be processed by injection molding, extrusion, thermoforming, and blow molding. Thin walls down to 0.2 mm are possible.

Q9: Is ULTEM 2210 FDA / food contact compliant?
A: This material is food contact compliant in most jurisdictions – exceptions may exist, request a declaration for details.

Q10: What is the difference between ULTEM 2210 and ULTEM HU2210?
A: HU2210 is the healthcare/medical grade variant with biocompatibility (ISO 10993 or USP Class VI) and supports steam, gamma, EtO, and E-beam sterilization. ULTEM 2210 is the standard industrial grade.

Q11: Is there a sustainable/bio-based version of ULTEM 2210?
A: Yes. ISCC+ certified renewable bio-based solutions are available for this grade via differentiated color nomenclature.

Q12: What is the lead time for orders?
A: Regular orders ship within 7-10 working days after payment confirmation. Large-volume or urgent orders can be negotiated separately.

CTA (Call to Action)

Ready to order ULTEM 2210?

To get a precise quotation and professional technical support, please share:

• Required quantity (kg)

• Destination port or delivery address

• Target application (aerospace, automotive, electrical, medical, etc.)

• Processing method (injection molding, extrusion, etc.)

• Color requirement (custom colors available)

• Bio-based preference (standard or ISCC+ certified renewable grade)

• Document requirement (TDS, SDS, UL, FDA compliance, COA, etc.)

Sample Policy:

• Samples are for laboratory validation tests only, not for production use.

• Buyer bears international sample-shipping freight.

• If bulk-product performance deviates from sample reference, SABIC official TDS serves as the authoritative benchmark.

Take action now:

• 📧 Email Us – ruiqingchem@gmail.com

• 📝 Send Inquiry – Use our quick inquiry form

• 💬 Live Chat – Click the bottom-right chat widget to speak directly with our team

After-Sales Support

Disclaimer

DISCLAIMER: All technical data is referenced from original SABIC typical values for ULTEM 2210. Our company acts as authorized distributor/trader rather than original manufacturer. Final performance depends on processing conditions, mold design, and part geometry. Buyers shall independently validate product suitability for individual applications. Our firm bears no liability for product failure caused by improper processing or improper usage. Always reference the latest SABIC official TDS of ULTEM 2210 as the definitive specification.