描述
532-6414 Green is an ETFE powder topcoat from Chemours‘ Teflon industrial coatings portfolio, genuinely manufactured by Chemours and imported as original product. As an authorized distributor and trader, we supply genuine material with full traceability and direct access to official Chemours technical documentation. For more product options and company information, please visit our website at https://szrqchem.com/.
532-6414 Green is an ETFE (ethylene tetrafluoroethylene) powder topcoat specifically engineered for high build / thick film applications. ETFE is a thermoplastic copolymer of ethylene and tetrafluoroethylene. Although not fully fluorinated, ETFE has excellent chemical resistance and is the toughest of the fluoroplastics. This resin is extremely tough, abrasion resistant, and has excellent chemical resistance. ETFE is also an excellent electrical insulator and has good nonstick and low friction properties.
The 532-641x product line is designed for high-build topcoats, has outstanding resistance to heat, and is specially formulated to resist sagging in thick films. The green pigmented finish provides a distinctive industrial appearance while delivering superior protection against chemical corrosion. The coating sintered film is very dense and nonporous, providing excellent chemical resistance.
532-6414 is FDA compliant for food contact applications per 21CFR, making it suitable for food processing equipment, industrial bakeware, and other food‑contact uses. As a powder coating, 532-6414 contains zero VOCs, offering significant environmental and worker safety advantages.
With regular stock availability, we support both trial orders and large‑volume bulk shipments for chemical processing, heat exchangers, semiconductor equipment, pharmaceutical manufacturing, and other demanding industrial applications.
Key Features of 532-6414 Green ETFE Powder Topcoat
-
High Build / Thick Film Capability – Total film thickness up to 1,000 µm (approx. 40 mil) with recommended DFT of 60-150 µm per layer; specially formulated to resist sagging in thick films
-
Extremely Tough & Abrasion Resistant – ETFE is the toughest of the fluoroplastics, providing superior mechanical strength and wear resistance
-
Excellent Chemical Resistance – Sintered coating forms a very dense, nonporous film with outstanding resistance to chemical corrosion
-
FDA Food Contact Compliant – FDA compliant for food contact applications per 21CFR
-
Green Finish – Distinctive green pigmented finish for easy visual identification and consistent industrial appearance
-
High Temperature Resistance – Continuous service up to 149°C (300°F) with intermittent service up to 302°C (575°F)
-
Good Nonstick & Low Friction Properties – Coating surface energy is extremely low at 18-20 dynes/cm; friction coefficient stabilizes between 0.05-0.20
-
Excellent Dielectric Strength – ETFE is an excellent electrical insulator
-
Excellent Weatherability – Outdoor exposure 10+ years with >80% gloss retention
-
Zero VOC Formulation – Powder coating contains 0 g/kg VOC, offering significant environmental and worker safety advantages
-
Broad Substrate Compatibility – Compatible with aluminum, stainless steel, and carbon steel substrates
-
System Compatibility – Interchangeable and compatible with liquid and powder topcoats
Typical Applications for 532-6414 Green
| Industry | Typical Components & Considerations |
|---|---|
| Chemical Processing | Reaction vessels, agitators, pipelines, pumps, tanks, valves – resists strong acids and alkalis, ensures equipment stability and service life |
| Heat Exchangers | Heat exchanger surfaces – requires nonstick, corrosion protection, and thick film durability |
| Semiconductor Equipment | High‑purity components, circuit board baking trays – stable at high temperatures, no harmful substance release |
| Food Processing | Bakeware, conveyor belts, cutting tools – FDA compliant, ensures easy release and cleaning |
| Pharmaceutical Manufacturing | Pharmaceutical production equipment – requires high purity and chemical resistance |
| Plastic & Rubber Industry | Rollers, shoe molds, rubber glove molds, tire molds – prevents sticking, extends mold life |
| Textile Industry | Rollers for yarn sizing – prevents high‑viscosity chemical slurry adhesion |
| Medical Devices | Surgical instruments, infusion tubes – reduces friction, improves durability |
| Aerospace | Aircraft engine components, fuel system piping – stable performance in extreme environments |
| Power & Energy Production | Power generation equipment, heat exchangers – chemical resistance and high dielectric strength |
| Automotive Components | Carburetor shafts, linkage devices, cruise control parts – dry lubrication and corrosion resistance |
| Valve & Pump Components | Industrial valves, pumps – corrosion protection and thick film durability |
| Automatic Welding Equipment | Welding fixtures and tooling – spatter resistance and easy cleaning |
Material Advantages
532-6414 Green ETFE Powder Topcoat delivers:
-
High Build Capability – Supports total film thickness up to 1,000 µm (approx. 40 mil) , providing enhanced abrasion resistance, corrosion protection, and extended service life. Recommended DFT of 60-150 µm per layer enables efficient application.
-
Sag Resistance in Thick Films – Specially formulated to resist sagging, ensuring uniform coating quality even at maximum film builds
-
Exceptional Toughness – ETFE is the toughest of the fluoroplastics, offering superior impact resistance and mechanical strength compared to PTFE, FEP, or PFA
-
Excellent Chemical Resistance – Forms a very dense, nonporous film with outstanding resistance to chemical corrosion; can tolerate 98% sulfuric acid and 30% sodium hydroxide
-
Excellent Weatherability – Outdoor exposure 10+ years with >80% gloss retention
-
Food Safety – FDA compliant for food contact per 21CFR when used with a compliant layer, enabling use in food processing and food‑contact applications
-
Thermal Stability – Maintains performance at continuous service temperatures up to 149°C (300°F), with intermittent service up to 302°C (575°F)
-
High Dielectric Strength – Excellent electrical insulation properties for electrical and semiconductor applications
-
Zero VOC – Powder formulation contains no VOCs, offering significant environmental and worker safety advantages
-
Good Nonstick & Low Friction – Provides good release properties with surface energy of 18-20 dynes/cm and friction coefficient of 0.05-0.20
-
Broad Substrate Compatibility – Applicable to aluminum, stainless steel, and carbon steel
-
System Flexibility – Interchangeable and compatible with liquid and powder topcoats for multi‑coat systems
Chemours, as the inventor of Teflon, brings over 80 years of fluoro‑polymer expertise, ensuring batch‑to‑batch consistency, reliable supply, and full technical support.
Typical Properties
| Property | 532-6414 Green | Unit / Remarks |
|---|---|---|
| Product Type | ETFE High Build Powder Topcoat | – |
| Color | Green | – |
| Form | Powder | Zero VOC |
| Coating System | Topcoat – High Build | Must be used with primer |
| FDA Compliance | Yes – Food Contact per 21CFR | |
| CAS Number | 25038-71-5 | |
| Max Continuous Service Temp. | 149°C (300°F) | |
| Intermittent Service Temp. | 302°C (575°F) | |
| Cure Temperature | 300-315°C (572-599°F) | |
| Recommended DFT per Coat | 60-150 µm (2.4-5.9 mil) per layer | |
| Max Total Film Build | Up to 1,000 µm (approx. 40 mil) | |
| Surface Energy | 18 – 20 dynes/cm | |
| Coefficient of Friction | 0.05 – 0.20 | |
| Chemical Resistance | Excellent – resists 98% H₂SO₄, 30% NaOH | |
| Weatherability (10 yrs) | >80% gloss retention | |
| Application Method | Electrostatic Spray / Fluidized Bed | |
| Recommended Primer | Powder primer 532-6405 | |
| Packaging | 4 kg pails | |
| Shelf Life | 36 months (3 years) | – |
Important Notes on Typical Data:
-
Values listed are typical and sourced from Chemours official data sheets. They do not constitute binding product specification.
-
Physical constants are averages only and may vary up to ±5% of the values shown.
-
Theoretical coverage at dry film thickness based on 100% application efficiency. It does not take normal production losses into account.
-
Final performance depends on substrate preparation, application method, and curing conditions.
-
Chemours original TDS shall serve as definitive technical reference. Request the latest official TDS from our sales team.
Processing Guidelines
| Step | Process |
|---|---|
| Substrate | Aluminum, stainless steel, carbon steel |
| Surface Preparation | Remove all grease and contaminants. Use organic solvents to dissolve grease and heat to approximately 400°C to volatilize, then grit blast to roughen the surface |
| Powder Preparation | Homogenize powder before opening bag |
| Screening | 30 mesh (approx. 550 μm) stainless steel or nylon. Insufficient screening can result in application defects |
| Primer Application | Recommended primer: Powder primer 532-6405. If powder primer is used with a complete powder system, efficiency is higher |
| Application Method | Use fluidized bed with or without vibration system (depends on powder quantity and particle size). On flat and/or conductive parts, high voltage and higher amperage can be used. On insulated and complex parts, amperage should be lowered |
| Recommended DFT per Coat | 60-150 µm (2.4-5.9 mil) per layer |
| Max Total DFT | Up to 1,000 µm (approx. 40 mil) |
| Curing | 300-315°C (572-599°F) ; cure time depends on part mass and film thickness |
| Storage | Store in original, sealed containers in a cool, dry place away from direct sunlight |
| Shelf Life | 36 months (3 years) in unopened, clean, dry storage |
Critical Processing Warnings:
-
Primer Required: 532-6414 is a topcoat and must be used with a compatible primer system. Recommended primer: Powder primer 532-6405.
-
Do Not Apply as Single Coat: This topcoat is designed for use with primer systems and should not be applied as a single coat system.
-
Surface Preparation: Proper surface preparation is critical for adhesion. Remove all grease and contaminants from the surface.
-
High Build Application: Specially formulated to resist sagging in thick films. Recommended DFT per coat 60-150 µm, max total 1,000 µm.
-
Screening: Insufficient screening can result in application defects.
-
Curing: Cure time and temperature depend on part mass and oven characteristics. Always verify with test pieces.
-
Storage: Store in original, sealed containers in a cool, dry place away from direct sunlight.
-
Shelf Life: 36 months (3 years) in unopened, clean, dry storage.
Related Products
-
Explore Teflon ETFE Coatings – Browse all Teflon ETFE industrial coating options
-
Explore Teflon PTFE Coatings – Browse all Teflon PTFE industrial coating options
-
850G-300 Clear – Teflon PTFE Acid Primer – Acid primer for PTFE, PFA, and FEP topcoat systems
-
About Our Company – Learn more about our supply capabilities and quality assurance
Technical Documents
| Document Type | Description & Source |
|---|---|
| Chemours Official TDS | Complete physical, thermal, and mechanical properties of 532-6414 Green, issued by Chemours original |
| Chemours Official SDS | GHS‑compliant chemical safety documentation, original Chemours document |
| Chemours Distributor Authorization Certificate | Proof of our authorized‑distributor qualification for Chemours Teflon series, available upon request |
| FDA Compliance Declaration | FDA food contact compliance statement per 21CFR |
| COA (Certificate of Analysis) | Batch‑specific quality certification |
| Application & Usage Guide | Detailed application guidance for ETFE high build powder coating systems |
Request any document above by:
-
Email:
ruiqingchem@gmail.com -
Online form: Our contact page
We reply within one working business day. Please clearly state product (532-6414 Green) and document type you require.
FAQ
Q1: What is 532-6414 Green and what is it used for?
A: 532-6414 Green is an ETFE (ethylene tetrafluoroethylene) powder topcoat from the Teflon industrial coatings portfolio. It is specifically designed for high build / thick film applications with total film thickness up to 1,000 µm (approx. 40 mil) . It is widely used in chemical processing equipment, heat exchangers, semiconductor equipment, food processing, pharmaceutical manufacturing, power generation, aerospace, and general industrial applications.
Q2: Is 532-6414 Green FDA compliant?
A: Yes. 532-6414 is FDA compliant for food contact applications per 21CFR.
Q3: What makes 532-6414 different from other ETFE powders?
A: 532-6414 is part of the 532-641x product line designed for high-build topcoats. It offers total film build of up to 1,000 µm (approx. 40 mil) and is specially formulated to resist sagging in thick films. It is also FDA compliant for food contact applications.
Q4: What is the difference between 532-6414 and 532-6314?
A: Both are green ETFE high build topcoats. 532-6414 offers greater film thickness capability – up to 1,000 µm (approx. 40 mil) vs 25.0 mil for 532-6314. 532-6414 also has a higher single coat DFT recommendation (60-150 µm per layer vs 4.0-6.0 mil for 532-6314) and higher cure temperature (300-315°C vs 302°C).
Q5: What is the difference between 532-6414 and 532-6410?
A: 532-6410 is Clear and not FDA compliant, while 532-6414 is Green and FDA compliant. Both share similar high build capabilities, cure temperatures, and film build specifications.
Q6: Is primer required for 532-6414 Green?
A: Yes. 532-6414 is a topcoat and must be used with a compatible primer system. Recommended primer: Powder primer 532-6405.
Q7: What is the temperature range of 532-6414 Green?
A: Continuous service up to 149°C (300°F) with intermittent service up to 302°C (575°F).
Q8: What is the recommended film build for 532-6414 Green?
A: Recommended DFT per coat: 60-150 µm (2.4-5.9 mil) per layer; maximum total film build: up to 1,000 µm (approx. 40 mil) .
Q9: What is the cure temperature for 532-6414 Green?
A: The cure temperature is 300-315°C (572-599°F) .
Q10: What substrates can 532-6414 Green be applied to?
A: It can be applied to aluminum, stainless steel, and carbon steel.
Q11: Is 532-6414 Green PFA or ETFE?
A: 532-6414 is ETFE (ethylene tetrafluoroethylene) , not PFA. ETFE is a thermoplastic copolymer of ethylene and tetrafluoroethylene and is the toughest among fluoroplastics.
Q12: What is the CAS number of 532-6414 Green?
A: The CAS number is 25038-71-5.
Q13: What is the shelf life of 532-6414 Green?
A: The shelf life is 36 months (3 years) in unopened, proper storage.
Q14: What is the lead time for orders?
A: Regular orders ship within 7‑10 working days after payment confirmation. Large‑volume or urgent orders can be negotiated.
CTA (Call to Action)
Ready to order 532-6414 Green?
To get a precise quotation and professional technical support, please share:
-
Required quantity (kg)
-
Destination port or delivery address
-
Target application (chemical processing, heat exchangers, semiconductor, food processing, pharmaceutical, power generation, aerospace, etc.)
-
Required total film thickness (up to 1,000 µm / 40 mils)
-
Primer requirement (Powder primer 532-6405 recommended)
-
Document requirement (TDS, SDS, FDA compliance, COA, etc.)
Sample Policy:
-
Samples are for laboratory validation tests only, not for production use.
-
Buyer bears international sample‑shipping freight.
-
If bulk‑product performance deviates from sample reference, Chemours official TDS serves as the authoritative benchmark.
Take action now:
-
📧 Email Us –
ruiqingchem@gmail.com -
📝 Send Inquiry – Use our quick inquiry form
-
💬 Live Chat – Click the bottom‑right chat widget to speak directly with our team
After‑Sales Support
| Service | Details |
|---|---|
| Quality Inspection Period | All quality‑related claims must be submitted within 7 working‑days after delivery, supported by test data and photographic evidence. |
| Return / Exchange Policy | Confirmed product defects caused by our side trigger replacement or refund. Terms and conditions apply. |
| Logistics Damage | Report shipping damage directly to carrier immediately upon goods receipt. We assist with claim‑document preparation. |
| Technical Support | Remote technical guidance available. On‑site troubleshooting can be arranged upon special request. |
| Export Documentation | We supply commercial invoice, packing list, bill of lading, COA, and additional compliance certificates (e.g., FDA) on request. |
Disclaimer
DISCLAIMER: All technical data is referenced from original Chemours typical values for 532-6414 Green. Our company acts as authorized distributor/trader rather than original manufacturer. Final performance depends on substrate preparation, application method, and curing conditions. Buyers shall independently validate product suitability for individual applications. Our firm bears no liability for coating failure caused by improper application or improper usage. Always reference the latest Chemours official TDS of 532-6414 Green as the definitive specification.
