描述
532-6410 Clear is a super high build ETFE powder topcoat from Chemours‘ Teflon industrial coatings portfolio, genuinely manufactured by Chemours and imported as original product. As an authorized distributor and trader, we supply genuine material with full traceability and direct access to official Chemours technical documentation. For more product options and company information, please visit our website at https://szrqchem.com/.
532-6410 Clear is an ETFE (ethylene tetrafluoroethylene) powder topcoat specifically engineered for super high build / ultra-thick film applications. ETFE is a thermoplastic copolymer of ethylene and tetrafluoroethylene. Although not fully fluorinated, ETFE has excellent chemical resistance and can operate continuously at 150°C. This resin is the toughest of the fluoroplastics and can be applied with film thicknesses of up to 1,000 µm to provide an extremely durable finish.
The 532-641x product line is designed for super high-build topcoats, has outstanding resistance to heat, and is specially formulated to resist sagging in ultra-thick films. With a single coat film build of 8.0-10.0 mil and a maximum total film build of 60.0-80.0 mil (approx. 1,500-2,000 µm), 532-6410 delivers unsurpassed thick film protection for the most demanding industrial applications. The transparent finish preserves the appearance of the underlying substrate while delivering superior protection against chemical corrosion. The coating sintered film is very dense and nonporous, providing excellent chemical resistance.
Developed by DuPont in 2013 as a complement to the existing Tefzel® product line, 532-6410 represents a new, improved formulation of ETFE resin. As a powder coating, 532-6410 contains zero VOCs, offering significant environmental and worker safety advantages.
With regular stock availability, we support both trial orders and large‑volume bulk shipments for chemical processing, power generation, semiconductor equipment, pharmaceutical manufacturing, and other demanding industrial applications.
Key Features of 532-6410 Clear ETFE Powder Topcoat
-
Super High Build / Ultra-Thick Film Capability – Single coat 8.0-10.0 mil (203-254 µm); maximum total film build up to 60.0-80.0 mil (approx. 1,500-2,000 µm) – the highest film build among ETFE coatings.
-
Sag Resistance in Ultra-Thick Films – Specially formulated to resist sagging in thick films, ensuring uniform coating quality even at maximum film builds.
-
Extremely Tough & Abrasion Resistant – ETFE is the toughest of the fluoroplastics, providing superior mechanical strength and wear resistance.
-
Excellent Chemical Resistance – Sintered coating forms a very dense, nonporous film with outstanding resistance to chemical corrosion.
-
High Temperature Resistance – Continuous service up to 149°C (300°F) with excellent thermal stability.
-
Good Nonstick & Low Friction Properties – Provides good nonstick release and low friction characteristics.
-
Excellent Dielectric Strength – ETFE is an excellent electrical insulator, suitable for electrical and semiconductor applications.
-
Zero VOC Formulation – Powder coating contains 0 g/kg VOC, offering significant environmental and worker safety advantages.
-
Broad Substrate Compatibility – Compatible with carbon steel, aluminum, stainless steel, steel alloys, brass, and magnesium.
-
System Compatibility – Designed to work with powder primer 532-6405 for optimal performance; interchangeable and compatible with liquid and powder topcoats.
Typical Applications for 532-6410 Clear
| Industry | Typical Components & Considerations |
|---|---|
| Chemical Processing | Reaction vessels, agitators, pipelines, pumps, tanks, valves, chemical storage tanks – ultra-thick film provides exceptional chemical resistance and permeation barrier |
| Power & Energy Production | Power generation equipment, heat exchangers, energy production components – requires chemical resistance and high dielectric strength |
| Semiconductor Equipment | High‑purity components, circuit board baking trays – stable at high temperatures, no harmful substance release |
| Pharmaceutical Manufacturing | Pharmaceutical production equipment, medical devices – requires high purity and chemical resistance |
| Food Processing Equipment | Bakeware, conveyor belts, cutting tools – nonstick and easy cleaning (Note: Not FDA compliant) |
| Plastic & Rubber Industry | Rollers, shoe molds, rubber glove molds, tire molds – prevents sticking, extends mold life |
| Textile Industry | Rollers for yarn sizing – prevents high‑viscosity chemical slurry adhesion |
| Aerospace | Aircraft engine components, fuel system piping – stable performance in extreme environments |
| Valve & Pump Components | Industrial valves, pumps – corrosion protection and ultra-thick film durability |
| General Industrial | Components requiring ETFE nonstick properties with super high build, transparent finish |
Material Advantages
532-6410 Clear ETFE Powder Topcoat delivers:
-
Unsurpassed High Build Capability – Supports total film thickness up to 60.0-80.0 mil (approx. 1,500-2,000 µm) , providing the ultimate abrasion resistance, corrosion protection, and extended service life. Film thicknesses up to 1,000 μm can be achieved for a highly durable finish.
-
Sag Resistance in Ultra-Thick Films – Specially formulated to resist sagging, ensuring uniform coating quality even at maximum film builds.
-
Exceptional Toughness – ETFE is the toughest of the fluoroplastics, offering superior impact resistance and mechanical strength compared to PTFE, FEP, or PFA.
-
Excellent Chemical Resistance – Forms a very dense, nonporous film with outstanding resistance to chemical corrosion.
-
Abrasion Resistance – Extremely tough and wear-resistant, extending service life in demanding applications.
-
Thermal Stability – Maintains performance at continuous service temperatures up to 149°C (300°F).
-
High Dielectric Strength – Excellent electrical insulation properties for electrical and semiconductor applications.
-
Zero VOC – Powder formulation contains no VOCs, offering significant environmental and worker safety advantages.
-
Good Nonstick & Low Friction – Provides good release properties and low friction characteristics.
-
Broad Substrate Compatibility – Applicable to carbon steel, aluminum, stainless steel, steel alloys, brass, and magnesium.
-
System Flexibility – Designed to work with powder primer 532-6405; interchangeable and compatible with liquid and powder topcoats for multi‑coat systems.
-
Improved Formulation – Represents a new, improved formulation of ETFE resin with enhanced performance characteristics.
Chemours, as the inventor of Teflon, brings over 80 years of fluoro‑polymer expertise, ensuring batch‑to‑batch consistency, reliable supply, and full technical support.
Typical Properties
| Property | 532-6410 Clear | Unit / Remarks |
|---|---|---|
| Product Type | ETFE Super High Build Powder Topcoat | – |
| Color | Clear / Transparent | 透明无色 |
| Form | Powder | Zero VOC |
| Coating System | Topcoat – Super High Build | Must be used with primer |
| FDA Compliance | No – Not FDA compliant per 21CFR | – |
| CAS Number | 25038-71-5 | – |
| Coverage | 22.0 m²/kg (110 ft²/gal) | – |
| Average Particle Size | 76 – 96 μm | – |
| Bulk Density | 55 – 85 g/100 cc | – |
| Density | 1.70 kg/L (14.22 lbs/gal) | – |
| Max Continuous Service Temp. | 149°C (300°F) | – |
| Cure Temperature | 300-315°C (572-599°F) | – |
| Single Coat Film Build | 8.0 – 10.0 mil (203 – 254 µm) | – |
| Recommended DFT per Coat | 60-150 µm (2.4-5.9 mil) per layer | – |
| Max Total Film Build | 60.0 – 80.0 mil (1,500 – 2,000 µm) | Super High Build |
| Chemical Resistance | Excellent – resists acids, alkalis, solvents | – |
| Abrasion Resistance | Excellent – extremely tough | – |
| Dielectric Strength | Very good | – |
| Application Method | Electrostatic Spray / Fluidized Bed | – |
| Recommended Primer | Powder primer 532-6405 | – |
| Packaging | 4 kg, 5 kg, 10 kg, 20 kg pails / bags | – |
| Shelf Life | 36 months (3 years) | Unopened, proper storage |
Important Notes on Typical Data:
-
Values listed are typical and sourced from Chemours official data sheets. They do not constitute binding product specification.
-
Physical constants are averages only and may vary up to ±5% of the values shown.
-
Theoretical coverage at dry film thickness of 25 µm (1.0 mil) based on 100% application efficiency. It does not take normal production losses into account.
-
Final performance depends on substrate preparation, application method, and curing conditions.
-
Chemours original TDS shall serve as definitive technical reference. Request the latest official TDS from our sales team.
Processing Guidelines
| Step | Process |
|---|---|
| Substrate | Carbon steel, aluminum, stainless steel, steel alloys, brass, magnesium |
| Surface Preparation | Remove all grease and contaminants. Use organic solvents to dissolve grease and heat to approximately 400°C to volatilize, then grit blast to roughen the surface |
| Powder Preparation | Homogenize powder before opening bag |
| Screening | 30 mesh (approx. 550 μm) stainless steel or nylon. Insufficient screening can result in application defects |
| Primer Application | Recommended primer: Powder primer 532-6405. If powder primer is used with a complete powder system, efficiency is higher |
| Application Method | Use fluidized bed with or without vibration system (depends on powder quantity and particle size). On flat and/or conductive parts, high voltage and higher amperage can be used. On insulated and complex parts, amperage should be lowered |
| Spray Distance | 20-30 cm from substrate |
| Single Coat DFT | 8.0 – 10.0 mil (203 – 254 µm) |
| Recommended DFT per Coat | 60-150 µm (2.4-5.9 mil) per layer |
| Max Total DFT | 60.0 – 80.0 mil (approx. 1,500 – 2,000 µm) |
| Drying (Metal Temp.) | Powders can be applied dry on wet. Full coating system should be dried before final cure |
| Curing | 300-315°C (572-599°F) ; cure time depends on part mass and film thickness |
| Storage | Store in original, sealed containers in a cool, dry place away from direct sunlight |
| Shelf Life | 36 months (3 years) in unopened, clean, dry storage |
Critical Processing Warnings:
-
Primer Required: 532-6410 is a topcoat and must be used with a compatible primer system. Recommended primer: Powder primer 532-6405.
-
Do Not Apply as Single Coat: This topcoat is designed for use with primer systems and should not be applied as a single coat system.
-
Surface Preparation: Proper surface preparation is critical for adhesion. Remove all grease and contaminants from the surface.
-
Super High Build Application: Specially formulated to resist sagging in ultra-thick films. Single coat 8.0-10.0 mil (203-254 µm), max total 60.0-80.0 mil (1,500-2,000 µm).
-
Screening: Insufficient screening can result in application defects.
-
Curing: Cure time and temperature depend on part mass and oven characteristics. Always verify with test pieces.
-
Storage: Store in original, sealed containers in a cool, dry place away from direct sunlight.
-
Shelf Life: 36 months (3 years) in unopened, clean, dry storage.
Related Products
-
Explore Teflon ETFE Coatings – Browse all Teflon ETFE industrial coating options
-
Explore Teflon PTFE Coatings – Browse all Teflon PTFE industrial coating options
-
850G-300 Clear – Teflon PTFE Acid Primer – Acid primer for PTFE, PFA, and FEP topcoat systems
-
About Our Company – Learn more about our supply capabilities and quality assurance
Technical Documents
| Document Type | Description & Source |
|---|---|
| Chemours Official TDS | Complete physical, thermal, and mechanical properties of 532-6410 Clear, issued by Chemours original |
| Chemours Official SDS | GHS‑compliant chemical safety documentation, original Chemours document |
| Chemours Distributor Authorization Certificate | Proof of our authorized‑distributor qualification for Chemours Teflon series, available upon request |
| COA (Certificate of Analysis) | Batch‑specific quality certification |
| Application & Usage Guide | Detailed application guidance for ETFE super high build powder coating systems |
Request any document above by:
-
Email:
ruiqingchem@gmail.com -
Online form: Our contact page
We reply within one working business day. Please clearly state product (532-6410 Clear) and document type you require.
FAQ
Q1: What is 532-6410 Clear and what is it used for?
A: 532-6410 Clear is an ETFE (ethylene tetrafluoroethylene) powder topcoat from the Teflon industrial coatings portfolio. It is specifically designed for super high build / ultra-thick film applications with single coat 8.0-10.0 mil (203-254 µm) and max total film build up to 60.0-80.0 mil (approx. 1,500-2,000 µm). It is widely used in chemical processing equipment, power generation, semiconductor equipment, pharmaceutical manufacturing, and general industrial applications requiring exceptional thick film protection.
Q2: Is 532-6410 Clear FDA compliant?
A: No. 532-6410 is not FDA compliant for food contact applications per 21CFR. It is suitable for industrial applications where FDA compliance is not required.
Q3: What makes 532-6410 different from other ETFE powders?
A: 532-6410 is part of the 532-641x product line designed for super high-build topcoats. It offers the highest film build among ETFE coatings – single coat 8.0-10.0 mil and max total 60.0-80.0 mil (1,500-2,000 µm). It was developed in 2013 as a new, improved formulation of ETFE resin.
Q4: What is the difference between 532-6410 and 532-6310?
A: Both are high build ETFE topcoats. 532-6410 is a “Super High Build” coating with single coat 8.0-10.0 mil and max total 60.0-80.0 mil, while 532-6310 is “High Build” with single coat 4.0-6.0 mil and max total 25.0 mil. 532-6410 offers significantly greater film thickness capability.
Q5: Is primer required for 532-6410 Clear?
A: Yes. 532-6410 is a topcoat and must be used with a compatible primer system. Recommended primer: Powder primer 532-6405.
Q6: What is the temperature range of 532-6410 Clear?
A: Continuous service up to 149°C (300°F).
Q7: What is the recommended film build for 532-6410 Clear?
A: Single coat 8.0-10.0 mil (203-254 µm); recommended DFT per coat 60-150 µm (2.4-5.9 mil) per layer; maximum total film build 60.0-80.0 mil (approx. 1,500-2,000 µm).
Q8: What is the cure temperature for 532-6410 Clear?
A: The cure temperature is 300-315°C (572-599°F).
Q9: What substrates can 532-6410 Clear be applied to?
A: It can be applied to carbon steel, aluminum, stainless steel, steel alloys, brass, and magnesium.
Q10: Is 532-6410 Clear PFA or ETFE?
A: 532-6410 is ETFE (ethylene tetrafluoroethylene), not PFA. ETFE is a thermoplastic copolymer of ethylene and tetrafluoroethylene and is the toughest among fluoroplastics.
Q11: What is the CAS number of 532-6410 Clear?
A: The CAS number is 25038-71-5.
Q12: What is the shelf life of 532-6410 Clear?
A: The shelf life is 36 months (3 years) in unopened, proper storage.
Q13: What is the lead time for orders?
A: Regular orders ship within 7‑10 working days after payment confirmation. Large‑volume or urgent orders can be negotiated.
CTA (Call to Action)
Ready to order 532-6410 Clear?
To get a precise quotation and professional technical support, please share:
-
Required quantity (kg)
-
Destination port or delivery address
-
Target application (chemical processing, power generation, semiconductor, pharmaceutical, etc.)
-
Required total film thickness (up to 60.0-80.0 mils)
-
Primer requirement (Powder primer 532-6405 recommended)
-
Document requirement (TDS, SDS, COA, etc.)
Sample Policy:
-
Samples are for laboratory validation tests only, not for production use.
-
Buyer bears international sample‑shipping freight.
-
If bulk‑product performance deviates from sample reference, Chemours official TDS serves as the authoritative benchmark.
Take action now:
-
📧 Email Us –
ruiqingchem@gmail.com -
📝 Send Inquiry – Use our quick inquiry form
-
💬 Live Chat – Click the bottom‑right chat widget to speak directly with our team
After‑Sales Support
| Service | Details |
|---|---|
| Quality Inspection Period | All quality‑related claims must be submitted within 7 working‑days after delivery, supported by test data and photographic evidence. |
| Return / Exchange Policy | Confirmed product defects caused by our side trigger replacement or refund. Terms and conditions apply. |
| Logistics Damage | Report shipping damage directly to carrier immediately upon goods receipt. We assist with claim‑document preparation. |
| Technical Support | Remote technical guidance available. On‑site troubleshooting can be arranged upon special request. |
| Export Documentation | We supply commercial invoice, packing list, bill of lading, COA, and additional compliance certificates on request. |
Disclaimer
DISCLAIMER: All technical data is referenced from original Chemours typical values for 532-6410 Clear. Our company acts as authorized distributor/trader rather than original manufacturer. Final performance depends on substrate preparation, application method, and curing conditions. Buyers shall independently validate product suitability for individual applications. Our firm bears no liability for coating failure caused by improper application or improper usage. Always reference the latest Chemours official TDS of 532-6410 Clear as the definitive specification.
