描述
3M Novec 774 Engineered Fluid Ultra Low GWP Heat Transfer
Type: Fluoroketone
Boiling Point: 74°C
Viscosity: 0.52 cSt
GWP: ~1
Packing: 5KG / 20KG drum
3M Novec 774 Engineered Fluid is a clear, colorless, low-odor fluoroketone fluid designed as a sustainable heat transfer fluid with an ultra-low global warming potential (GWP) of approximately 1. With a boiling point of 74°C and a pour point of -78°C, this nonflammable fluid delivers exceptional performance in both single-phase and two-phase heat transfer applications across a wide temperature range. Its low viscosity of 0.52 cSt ensures excellent flow characteristics and efficient heat transfer, while its high dielectric strength makes it safe for direct contact with live electronics.
Novec 774 offers an unparalleled environmental profile — zero ozone depletion potential, ultra-low GWP of ~1, and a very short atmospheric lifetime due to rapid photolysis in sunlight. This makes it a sustainable replacement for sulfur hexafluoride (SF₆), hydrofluorocarbons (HFCs), perfluorocarbons (PFCs), and perfluoropolyethers (PFPEs), enabling greater than 99% reduction in greenhouse gas emissions. With a wide liquid range, compatibility with most metals and polymers, and a favorable safety profile (exposure guideline of 225 ppm), Novec 774 provides a long-term, environmentally responsible solution for electronics cooling, Organic Rankine Cycle systems, power electronics, and data center immersion cooling.
Genuine 3M Imported Stock and Technical Support
We supply stable spot inventory of genuine 3M Novec 774 engineered fluid. Official TDS, SDS, and batch COA documents are available for heat transfer, electronics cooling, and sustainable thermal management applications.
Request Novec 774 Quotation, TDS, SDS, and Sample
Complete SDS, COA, and technical documentation available
Core Advantages of 3M Novec 774 Engineered Fluid
- Ultra-low GWP: ~1 — among the lowest global warming potentials of any heat transfer fluid
- Wide liquid range: -78°C to 74°C — versatile for diverse thermal management needs
- Low viscosity: 0.52 cSt — excellent flow characteristics for efficient heat transfer
- Zero ozone depletion potential — environmentally responsible formulation
- Nonflammable — no flash point, safe operation in electronic and industrial environments
- Excellent dielectric properties — dielectric strength >40 kV, ideal for direct contact cooling
- SF₆ replacement — sustainable alternative for high-voltage equipment and transformers
- Very short atmospheric lifetime — rapid photolysis minimizes environmental impact
Main Applications
- Electronics cooling — single-phase and two-phase cooling of power electronics, IGBTs, and inverters
- Data center immersion cooling — sustainable cooling for servers and IT equipment
- Organic Rankine Cycle (ORC) — waste heat recovery in diesel engines, generators, and solar applications
- Transformer cooling — replacement for SF₆ in high-voltage transformers and switchgear
- Electric vehicle battery cooling — thermal management of battery packs and power electronics
- Electronics testing — temperature calibration and pressure compensation testing
Full Technical Parameters
| Property | Typical Value | Test Method |
| Chemical Name | Tetradecafluoro-2-methylhexan-3-one | — |
| Type | Fluoroketone | — |
| Purity | 99.0 mole % minimum | — |
| Molecular Weight | 366 g/mol | — |
| Boiling Point (@760 mmHg) | 74°C | ASTM D1078 |
| Pour Point | -78°C | ASTM D97 |
| Liquid Density (25°C) | 1.66 g/ml | ASTM D891 |
| Kinematic Viscosity (25°C) | 0.52 cSt | ASTM D445 |
| Absolute Viscosity (25°C) | 0.87 cP | — |
| Surface Tension | 12.3 mN/m | — |
| Specific Heat | 1130 J/kg·K | — |
| Thermal Conductivity | ~0.060 W/m·K | — |
| Dielectric Strength (0.1″ gap) | >40 kV | ASTM D877 |
| Dielectric Constant (@1 kHz) | 1.9 | ASTM D150 |
| Volume Resistivity | 10¹² ohm·cm | ASTM D257 |
| Solubility of Water in Fluid | 20 ppm | — |
| Ozone Depletion Potential | 0 | — |
| Global Warming Potential | ~1 | — |
| Flash Point | None | — |
| Flammability | Nonflammable | ASTM E681-94 |
| Exposure Guideline (8hr TWA) | 225 ppm | 3M Medical Dept. |
Note: All listed figures are typical values and may vary by production batch. Complete independent qualification testing is required before mass production deployment.
Novec 774 should be used in a sealed system to prevent interaction with water. Though reactive with liquid water, it is remarkably stable in its absence to over 300°C. Contact 3M application engineers for system design guidance.
Handling and Storage Recommendations
| Storage Rules | Store sealed original containers in a dry, well-ventilated area away from heat sources and direct sunlight. Use in a sealed system to prevent interaction with water. |
| Forbidden Environments | Avoid exposure to liquid water, open flames, strong oxidizing agents, and reactive metal powders. |
| Operation Protection | Maintain adequate ventilation. Wear nitrile protective gloves and anti-splash safety goggles during handling. |
Official Technical Documentation
| Document Type | Document Introduction | Document Request |
| TDS | 3M Novec 774 original factory technical data sheet | Request TDS |
| SDS | Safety data sheet covering transport, storage, and handling guidelines | Request SDS |
| COA | Batch-specific certificate of analysis | Request COA |
Frequently Asked Questions
What is the GWP of Novec 774?
Novec 774 has an ultra-low global warming potential (GWP) of approximately 1, making it one of the most environmentally sustainable heat transfer fluids available. Its atmospheric lifetime is very short due to photolysis in sunlight.
What is the boiling point of Novec 774?
Novec 774 has a boiling point of 74°C and a pour point of -78°C, providing a wide liquid range suitable for single-phase and two-phase heat transfer applications.
Is Novec 774 flammable?
No. Novec 774 is nonflammable with no flash point, providing safe operation in electronics cooling and industrial heat transfer applications.
What applications is Novec 774 suitable for?
Novec 774 is ideal for electronics cooling (single or two-phase), data center immersion cooling, Organic Rankine Cycle systems, power electronics cooling (IGBTs, inverters), transformer cooling (SF6 replacement), solar applications, and diesel engine heat transfer.
What is the viscosity of Novec 774?
Novec 774 has a low kinematic viscosity of 0.52 cSt at 25°C, providing excellent flow characteristics for efficient heat transfer and low pressure drop in cooling systems.
What is the dielectric strength of Novec 774?
Novec 774 offers excellent dielectric properties with dielectric strength greater than 40 kV, making it safe for direct contact with live electronics and ideal for immersion cooling applications.
Is Novec 774 compatible with common materials?
Novec 774 is compatible with a wide range of materials of construction and requires no special piping or handling systems. It is very stable in storage and compatible with most metals and hard polymers.
Related 3M Novec Engineered Fluids
Compare 3M Novec engineered fluids for different heat transfer and application requirements.
| Product Grade | Boiling Point | Viscosity (25°C) | GWP | Core Application |
| Novec 774 | 74°C | 0.52 cSt | ~1 | Ultra-low GWP heat transfer, electronics cooling |
| Novec 649 | 49°C | 0.40 cSt | 1 | Ultra-low GWP heat transfer, ORC |
| Novec 7500 | 128°C | 0.77 cSt | 100 | High temperature heat transfer |
Get 3M Novec 774 Bulk Pricing and Technical Support
We supply genuine 3M Novec 774 engineered fluid for ultra-low GWP heat transfer, electronics cooling, Organic Rankine Cycle, and SF₆ replacement applications. Contact us for bulk pricing, sample availability, technical documents, and application support.
Request Novec 774 Technical Details
Disclaimer: All technical data on this page are for general guidance only and are not product specifications. Buyers must carry out independent trials and verify suitability before bulk ordering. Actual values may vary between production lots.
