描述
3M Novec 7500 Engineered Fluid High Boiling Heat Transfer
Type: Segregated Hydrofluoroether
Boiling Point: 128°C
Viscosity: 0.77 cSt
GWP: 100
Packing: 5KG / 20KG drum
3M Novec 7500 Engineered Fluid is a clear, colorless, high‑purity segregated hydrofluoroether designed for demanding single‑phase and two‑phase heat transfer applications. With the highest boiling point (128°C) in the Novec 7000 series, this nonflammable fluid delivers exceptional thermal performance in semiconductor testing, high‑power electronics cooling, and data center immersion cooling. Its low viscosity of 0.77 cSt ensures efficient flow and heat transfer, while its excellent dielectric properties allow for direct contact with live electronic components.
Novec 7500 offers an optimal balance of high‑temperature stability and environmental sustainability — zero ozone depletion potential, low GWP of 100, and an atmospheric lifetime of just 3.2 years. It is recommended as a replacement for perfluorocarbons (PFCs), high‑GWP hydrofluorocarbons (HFCs), and other fluids with less favorable environmental profiles. With a wide liquid range from -100°C to 128°C, compatibility with most metals and polymers, and excellent dielectric properties, Novec 7500 provides a long‑term, sustainable solution for thermal management in the most demanding electronic and industrial applications.
Genuine 3M Imported Stock and Technical Support
We supply stable spot inventory of genuine 3M Novec 7500 engineered fluid. Official TDS, SDS, and batch COA documents are available for high‑temperature heat transfer, electronics cooling, and thermal management applications.
Request Novec 7500 Quotation, TDS, SDS, and Sample
Complete SDS, COA, and technical documentation available
Core Advantages of 3M Novec 7500 Engineered Fluid
- Highest boiling point: 128°C — enables stable single‑phase and two‑phase heat transfer at elevated temperatures
- Wide liquid range: -100°C to 128°C — versatile for diverse thermal management needs
- Low viscosity: 0.77 cSt — excellent flow characteristics for efficient cooling and low pressure drop
- Low GWP: 100 — environmentally sustainable alternative to high‑GWP heat transfer fluids
- Zero ozone depletion potential — environmentally responsible formulation
- Nonflammable — safe operation in electronic and industrial environments
- Excellent dielectric properties — direct contact cooling of live electronics
- Broad material compatibility — compatible with most metals and hard polymers
Main Applications
- Semiconductor testing — thermal management of test equipment and device characterization
- High‑power electronics cooling — cooling of IGBTs, power modules, and inverters
- Data center immersion cooling — single‑phase and two‑phase cooling of servers and IT equipment
- Electric vehicle battery cooling — thermal management of battery packs and power electronics
- Industrial heat transfer — thermal control in chemical, pharmaceutical, and manufacturing processes
- Temperature calibration — precision temperature control in calibration baths and test equipment
Full Technical Parameters
| Property | Typical Value | Test Method |
| Type | Segregated Hydrofluoroether | — |
| Molecular Weight | 414 g/mol | — |
| Boiling Point (@760 mmHg) | 128°C | ASTM D1078 |
| Pour Point | -100°C | ASTM D97 |
| Liquid Density (25°C) | 1.61 g/ml | ASTM D891 |
| Kinematic Viscosity (25°C) | 0.77 cSt | ASTM D445 |
| Surface Tension | 16.2 mN/m | — |
| Ozone Depletion Potential | 0 | — |
| Global Warming Potential | 100 | — |
| Flash Point | None | — |
| Flammability | Nonflammable | ASTM E681-94 |
Note: All listed figures are typical values and may vary by production batch. Complete independent qualification testing is required before mass production deployment.
Handling and Storage Recommendations
| Storage Rules | Store sealed original containers in a dry, well-ventilated area away from heat sources and direct sunlight. |
| Forbidden Environments | Avoid exposure to open flames, strong oxidizing agents, and reactive metal powders. |
| Operation Protection | Maintain adequate ventilation. Wear nitrile protective gloves and anti-splash safety goggles during handling. |
Official Technical Documentation
| Document Type | Document Introduction | Document Request |
| TDS | 3M Novec 7500 original factory technical data sheet | Request TDS |
| SDS | Safety data sheet covering transport, storage, and handling guidelines | Request SDS |
| COA | Batch-specific certificate of analysis | Request COA |
Frequently Asked Questions
What is the boiling point of Novec 7500?
Novec 7500 has a boiling point of 128°C, the highest among the Novec 7000 series engineered fluids, making it ideal for high-temperature heat transfer applications requiring stable liquid phase up to 128°C.
What is the GWP of Novec 7500?
Novec 7500 has a low global warming potential (GWP) of 100 and zero ozone depletion potential, offering an environmentally sustainable alternative to high-GWP heat transfer fluids.
Is Novec 7500 flammable?
No. Novec 7500 is nonflammable with no flash point, providing safe operation in high-temperature electronic cooling and industrial heat transfer applications.
What applications is Novec 7500 suitable for?
Novec 7500 is ideal for single-phase and two-phase heat transfer in semiconductor testing, high-power electronics cooling, data center immersion cooling, power electronics, and thermal management of sensitive components.
What is the viscosity of Novec 7500?
Novec 7500 has a low kinematic viscosity of 0.77 cSt at 25°C, providing excellent flow characteristics for efficient heat transfer and low pressure drop in cooling systems.
What is the dielectric strength of Novec 7500?
Novec 7500 offers excellent dielectric properties with high dielectric strength, making it safe for direct contact with live electronics and ideal for immersion cooling applications.
Related 3M Novec Engineered Fluids
Compare 3M Novec engineered fluids for different heat transfer and cleaning requirements.
| Product Grade | Boiling Point | Viscosity (25°C) | GWP | Core Application |
| Novec 7500 | 128°C | 0.77 cSt | 100 | High temperature heat transfer |
| Novec 7300 | 98°C | 0.71 cSt | 200 | Heat transfer + solvent cleaning |
| Novec 7200 | 76°C | 0.61 cSt | 55 | Vapor degreasing |
Get 3M Novec 7500 Bulk Pricing and Technical Support
We supply genuine 3M Novec 7500 engineered fluid for high‑temperature heat transfer, semiconductor testing, and electronics cooling applications. Contact us for bulk pricing, sample availability, technical documents, and application support.
Request Novec 7500 Technical Details
Disclaimer: All technical data on this page are for general guidance only and are not product specifications. Buyers must carry out independent trials and verify suitability before bulk ordering. Actual values may vary between production lots.
