描述
858G-106 Blue is a waterborne 858G-106 Blue FEP High Build Topcoat from Chemours‘ Teflon industrial coatings portfolio, genuinely manufactured by Chemours and imported as original product. As an authorized distributor and trader, we supply genuine material with full traceability and direct access to official Chemours technical documentation. For more product options and company information, please visit our website at https://szrqchem.com/.
This 858G-106 Blue FEP Topcoat is a high build / thick film waterborne FEP (fluorinated ethylene propylene) topcoat engineered as the final layer for multi‑coat FEP systems. FEP is a melt‑processable fluoropolymer that melts and flows during baking to form nonporous, smooth, and highly durable films. These coatings have excellent chemical and corrosion resistance, good abrasion resistance, and an extremely low coefficient of friction.
The 858G-106 Blue FEP Topcoat is specifically formulated for high build / thick film applications, providing enhanced durability and protection for demanding industrial environments. The blue pigmented finish offers distinctive visual identification and consistent industrial appearance. It delivers outstanding nonstick release properties, excellent chemical resistance, and low friction characteristics across a wide temperature range from -200°C to 204°C (-328°F to 400°F).
The waterborne formulation offers low VOC emissions, making it an environmentally responsible choice for modern industrial facilities. With regular stock availability, we support both trial orders and large‑volume bulk shipments for heat exchangers, automatic welding equipment, molds, automotive components, aerospace parts, and other demanding industrial applications.
Key Features of 858G-106 Blue FEP Topcoat
-
High Build / Thick Film Capability – Specially formulated for thick film applications, providing enhanced durability, abrasion resistance, and extended service life.
-
Blue Finish – Distinctive blue pigmented finish for easy visual identification and consistent industrial appearance.
-
FEP Melt‑Flow Technology – FEP melts and flows during baking to form nonporous, pinhole‑free films, providing excellent barrier protection.
-
Excellent Non‑Stick Release – FEP‑based formulation provides outstanding release properties; coating surface energy is extremely low at 18‑20 dynes/cm.
-
Ultra‑Low Coefficient of Friction – Friction coefficient stabilizes between 0.05‑0.20, with static friction reduced by over 70% compared to bare metal.
-
Wide Temperature Range – Continuous service from -200°C to 204°C (-328°F to 400°F), suitable for both cryogenic and high‑temperature applications.
-
Superior Chemical Resistance – Resists most acids, bases, and solvents; excellent chemical inertness.
-
Excellent Weatherability – Outdoor exposure 10+ years with >80% gloss retention.
-
Waterborne Formulation – Low VOC emissions, environmentally friendly processing, and safer handling for operators.
-
Broad Substrate Compatibility – Can be applied to carbon steel, aluminum, stainless steel, alloy steel, brass, magnesium, as well as non‑metallic materials including glass, fiberglass, and certain rubbers and plastics.
Typical Applications for 858G-106 Blue
| Industry | Typical Components & Considerations |
|---|---|
| Heat Exchangers | Heat exchanger surfaces – requires nonstick, corrosion protection, and thick film durability |
| Automatic Welding Equipment | Welding fixtures and tooling – spatter resistance and easy cleaning |
| Mold & Tooling | Injection molds, rubber molds, plastic molds – release properties and extended mold life |
| Automotive Components | Carburetor shafts, linkage devices, cruise control parts – dry lubrication and corrosion resistance |
| Aerospace & Cryogenic | Aerospace fasteners, cryogenic components – wide temperature range from cryogenic to high temperature |
| Filtration Systems | Coated filter elements – reduced fouling and improved flow |
| General Industrial | Components requiring FEP nonstick properties with high build and blue finish |
Material Advantages
The 858G-106 Blue FEP Topcoat is a waterborne FEP high build topcoat that delivers:
-
High Build Protection – Thick film capability provides enhanced abrasion resistance, corrosion protection, and extended service life compared to standard build topcoats.
-
Exceptional Nonstick Performance – FEP‑based formulation provides outstanding release properties; coating surface energy is extremely low at 18‑20 dynes/cm, with material adhesion less than 10% compared to uncoated surfaces.
-
Ultra‑Low Friction – Friction coefficient stabilizes between 0.05‑0.20, with static friction reduced by over 70% compared to bare metal.
-
Wide Temperature Range – Maintains performance from -200°C to 204°C, suitable for both cryogenic and high‑temperature applications.
-
Chemical Inertness – Resistant to most acids, bases, and solvents; can tolerate 98% sulfuric acid and 30% sodium hydroxide.
-
Excellent Weatherability – Outdoor exposure 10+ years with >80% gloss retention.
-
Environmental Compliance – Waterborne carrier with low VOC emissions reduces environmental impact compared to solvent‑based alternatives.
-
Broad Substrate Compatibility – Applicable to a wide range of metals and non‑metals, offering design flexibility.
-
Proven Durability – In 260°C high‑temperature environments, the coating shows no cracking or decomposition after 2,000 hours of continuous use; in -270°C cryogenic environments, it maintains good flexibility.
Chemours, as the inventor of Teflon, brings over 80 years of fluoro‑polymer expertise, ensuring batch‑to‑batch consistency, reliable supply, and full technical support.
Typical Properties
| Property | 858G-106 Blue | Unit / Remarks |
|---|---|---|
| Product Type | FEP Waterborne High Build Topcoat | – |
| Color | Blue | Distinctive industrial finish |
| Carrier | Waterborne (aqueous dispersion) | Low VOC |
| Coating System | High Build Topcoat | – |
| FDA Compliance | No – Not FDA compliant per 21CFR | – |
| Continuous Service Temp. | -200°C to 204°C (-328°F to 400°F) | |
| Surface Energy | 18 – 20 dynes/cm | Extremely low |
| Coefficient of Friction | 0.05 – 0.20 (static) | 70% lower than steel |
| Chemical Resistance | Excellent – resists 98% H₂SO₄, 30% NaOH | |
| Weatherability (10 yrs) | >80% gloss retention | |
| Application Method | Spray | – |
| Available Form | Liquid waterborne | Ready to spray |
| Packaging | 4 kg, 5 kg, 10 kg, 20 kg pails | |
| Shelf Life | 18 months | Unopened, proper storage |
Important Notes on Typical Data:
-
Values listed are typical and sourced from Chemours official data sheets. They do not constitute binding product specification.
-
Batch‑to‑batch deviations may exist. For critical applications, validate performance with batch‑specific COA certificate.
-
Final performance depends on substrate preparation, application method, and curing conditions.
-
Chemours original TDS shall serve as definitive technical reference. Request the latest official TDS from our sales team.
Processing Guidelines
| Step | Process |
|---|---|
| Substrate | Carbon steel, aluminum, stainless steel, alloy steel, brass, magnesium, as well as non‑metallic materials including glass, fiberglass, and certain rubbers and plastics |
| Surface Preparation | Degrease then abrasive blasting to achieve proper surface profile for adhesion |
| Coating Preparation | Gently mix until contents are homogeneous. Set mixer speed to create a vortex while avoiding air entrapment |
| Primer Application | 858G-106 is a topcoat and must be used with a compatible primer system. Unless explicitly noted, most Teflon industrial coatings require primer application |
| Topcoat Application | Apply 858G-106 Blue topcoat via conventional or HVLP spray |
| Curing | Follow Chemours recommended cure schedule for FEP topcoat systems |
| Storage | Store in original, sealed containers in a cool, dry place away from direct sunlight. Protect from freezing |
| Shelf Life | 18 months in unopened, clean, dry storage |
Critical Processing Warnings:
-
Primer Required: 858G-106 is a topcoat and must be used with a compatible primer system. Unless explicitly noted, most Teflon industrial coatings require primer application.
-
Surface Preparation: Proper surface preparation is critical for adhesion. Ensure surfaces are clean, dry, and properly roughened.
-
High Build Application: For thick film applications, multiple coats may be required. Allow appropriate drying between coats.
-
Curing: Cure time and temperature depend on primer selection and part mass. Always verify with test pieces.
-
Freeze Protection: Waterborne products must be protected from freezing.
-
Shelf Life: 18 months in unopened, clean, dry storage.
Related Products
-
Explore Teflon PTFE Coatings – Browse all Teflon industrial coating options
-
850G-300 Clear – Teflon PTFE Acid Primer – Acid primer for PTFE, PFA, and FEP topcoat systems
-
953G-506 Dark Violet – FEP Waterborne Primer – FEP primer for multi-coat food contact systems
-
About Our Company – Learn more about our supply capabilities and quality assurance
External Reference
For authoritative information, please refer to the following official resources:
-
Chemours Official Website – Corporate headquarters and product portfolio overview
-
Teflon Industrial Coatings Product Center – Official technical literature and application guides
Technical Documents
| Document Type | Description & Source |
|---|---|
| Chemours Official TDS | Complete physical, thermal, and mechanical properties of 858G-106 Blue, issued by Chemours original |
| Chemours Official SDS | GHS‑compliant chemical safety documentation, original Chemours document |
| Chemours Distributor Authorization Certificate | Proof of our authorized‑distributor qualification for Chemours Teflon series, available upon request |
| COA (Certificate of Analysis) | Batch‑specific quality certification |
| Application & Usage Guide | Detailed application guidance for FEP high build topcoat systems |
Request any document above by:
-
Email:
ruiqingchem@gmail.com -
Online form: Our contact page
We reply within one working business day. Please clearly state product (858G-106 Blue) and document type you require.
FAQ
Q1: What is 858G-106 Blue and what is it used for?
A: 858G-106 Blue is a waterborne, high build FEP topcoat from the Teflon industrial coatings portfolio. It provides excellent nonstick release, chemical resistance, and thermal stability from -200°C to 204°C. It is widely used in heat exchangers, automatic welding equipment, molds, automotive components, aerospace parts, and general industrial applications.
Q2: Is 858G-106 Blue FDA compliant?
A: No. 858G-106 is not FDA compliant for food contact applications per 21CFR. It is suitable for industrial and non‑food contact applications.
Q3: Is primer required for 858G-106 Blue?
A: Yes. 858G-106 is a topcoat and must be used with a compatible primer system. Unless explicitly noted, most Teflon industrial coatings require primer application.
Q4: What is the temperature range of 858G-106 Blue?
A: The continuous service temperature range is -200°C to 204°C (-328°F to 400°F).
Q5: What is the surface energy of 858G-106 Blue?
A: The coating surface energy is extremely low at 18‑20 dynes/cm, with material adhesion less than 10% compared to uncoated surfaces.
Q6: What is the coefficient of friction of 858G-106 Blue?
A: The friction coefficient stabilizes between 0.05‑0.20, with static friction reduced by over 70% compared to bare metal.
Q7: How does 858G-106 Blue perform in harsh environments?
A: The coating can tolerate 98% sulfuric acid and 30% sodium hydroxide. In 260°C high‑temperature environments, it shows no cracking or decomposition after 2,000 hours of continuous use; in -270°C cryogenic environments, it maintains good flexibility.
Q8: What is the shelf life of 858G-106 Blue?
A: The shelf life is 18 months in unopened, proper storage. Protect from freezing.
Q9: What is the lead time for orders?
A: Regular orders ship within 7‑10 working days after payment confirmation. Large‑volume or urgent orders can be negotiated.
CTA (Call to Action)
Ready to order 858G-106 Blue?
To get a precise quotation and professional technical support, please share:
-
Required quantity (kg)
-
Destination port or delivery address
-
Target application (heat exchangers, welding equipment, molds, automotive, aerospace, etc.)
-
Primer requirement
-
Document requirement (TDS, SDS, COA, etc.)
Sample Policy:
-
Samples are for laboratory validation tests only, not for production use.
-
Buyer bears international sample‑shipping freight.
-
If bulk‑product performance deviates from sample reference, Chemours official TDS serves as the authoritative benchmark.
Take action now:
-
📧 Email Us –
ruiqingchem@gmail.com -
📝 Send Inquiry – Use our quick inquiry form
-
💬 Live Chat – Click the bottom‑right chat widget to speak directly with our team
After‑Sales Support
| Service | Details |
|---|---|
| Quality Inspection Period | All quality‑related claims must be submitted within 7 working‑days after delivery, supported by test data and photographic evidence. |
| Return / Exchange Policy | Confirmed product defects caused by our side trigger replacement or refund. Terms and conditions apply. |
| Logistics Damage | Report shipping damage directly to carrier immediately upon goods receipt. We assist with claim‑document preparation. |
| Technical Support | Remote technical guidance available. On‑site troubleshooting can be arranged upon special request. |
| Export Documentation | We supply commercial invoice, packing list, bill of lading, COA, and additional compliance certificates on request. |
Disclaimer
DISCLAIMER: All technical data is referenced from original Chemours typical values for 858G-106 Blue. Our company acts as authorized distributor/trader rather than original manufacturer. Final performance depends on substrate preparation, application method, and curing conditions. Buyers shall independently validate product suitability for individual applications. Our firm bears no liability for coating failure caused by improper application or improper usage. Always reference the latest Chemours official TDS of 858G-106 Blue as the definitive specification.
