描述
856G-114 Green is a waterborne 856G-114 Green FEP One-Coat Dip Coating from Chemours‘ Teflon industrial coatings portfolio, genuinely manufactured by Chemours and imported as original product. As an authorized distributor and trader, we supply genuine material with full traceability and direct access to official Chemours technical documentation. For more product options and company information, please visit our website at https://szrqchem.com/.
This 856G-114 Green FEP Coating is a unique one-coat system formulated with specially blended fluoropolymers and other high-performance resins. This formulation enables it to form layers during the curing process, allowing the fluoropolymer to become more concentrated on the surface. Through this layering, the one-coat system better maintains its hardness, corrosion resistance, abrasion resistance, low friction, and nonstick properties during the drying process.
The 856G-114 Green FEP Coating is specifically designed for dip coating application on smooth, clean metal surfaces without the need for a primer. It is a conductive coating with anti-static properties (10⁶ – 10¹² ohms/square), making it suitable for applications requiring static dissipation. While it is not FDA compliant, it offers excellent nonstick release, low friction, chemical resistance, and thermal stability up to 205°C (400°F).
With regular stock availability, we support both trial orders and large-volume bulk shipments for fasteners, automotive components, aerospace parts, food processing equipment (non-food contact), and other demanding industrial applications.
Key Features of 856G-114 Green FEP Dip Coating
-
One-Coat System – Can be applied directly to smooth, clean metal surfaces without the need for a primer, simplifying the coating process and reducing costs.
-
Dip Coating Application – Specifically formulated for dip coating, achieving film builds up to 50 µm (2.0 mil) per coat and total DFT up to 75 µm (3.0 mil).
-
Conductive / Anti-Static – Provides anti-static properties (10⁶ – 10¹² ohms/square), making it suitable for applications requiring static dissipation.
-
Green Finish – Distinctive green pigmented finish for easy visual identification and consistent industrial appearance.
-
Excellent Non-Stick Release – FEP-based formulation provides outstanding release properties; virtually no solid substance can permanently adhere to the coating surface.
-
Ultra-Low Coefficient of Friction – Coefficient of friction ranges from 0.05 to 0.20, depending on load, sliding speed, and coating.
-
Superior Chemical Resistance – The low porosity of the coating provides excellent resistance to chemical environments; unaffected by most chemicals.
-
High Temperature Resistance – Maximum in-use temperature up to 205°C (400°F).
-
Excellent Abrasion Resistance – Exceptional durability and toughness protect against scratches and wear.
-
Waterborne Formulation – Low VOC emissions, environmentally friendly processing, and safer handling for operators.
-
Broad Substrate Compatibility – Can be applied to carbon steel, stainless steel, aluminum, aluminized steel, and other suitable substrates.
Typical Applications for 856G-114 Green
| Industry | Typical Components & Considerations |
|---|---|
| Fasteners | Screws, nuts, bolts – requires corrosion resistance, low friction, and anti-static properties |
| Automotive Components | Engine components, fasteners, linkage devices – low friction and corrosion protection |
| Aerospace Components | Fasteners, low-temperature valves, structural parts – requires high-performance coating |
| Food Processing Equipment | Non-food contact equipment, processing machinery – nonstick and easy cleaning (Note: Not FDA compliant) |
| Industrial Bakeware | Non-food contact bakeware components – requires nonstick properties |
| Chemical Processing | Valves, pipes, fittings – chemical resistance and anti-stick |
| General Industrial | Components requiring FEP nonstick properties with one-coat convenience |
Material Advantages
The 856G-114 Green FEP Dip Coating is a waterborne FEP coating that delivers:
-
One-Coat Convenience – Eliminates the need for a primer, simplifying the coating process and reducing material and labor costs.
-
Unique Layering Technology – The specially blended formulation forms layers during curing, concentrating the fluoropolymer on the surface for optimal performance.
-
Dip Coating Efficiency – Ideal for coating complex shapes and high volumes of small parts with consistent film thickness.
-
Conductive Properties – Anti-static performance (10⁶ – 10¹² ohms/square) makes it suitable for applications requiring static dissipation.
-
Exceptional Nonstick Performance – Virtually no solid substance can permanently adhere to the coating surface, reducing sticking and cleaning downtime.
-
Ultra-Low Friction – Coefficient of friction ranges from 0.05 to 0.20, significantly reducing wear and enabling smooth operation.
-
Chemical Inertness – Resistant to most chemicals; unaffected by corrosive environments.
-
Thermal Stability – Maintains performance at continuous service temperatures up to 205°C (400°F).
-
Durability – Excellent abrasion resistance protects against scratches and wear, extending service life.
-
Environmental Compliance – Waterborne carrier with low VOC emissions reduces environmental impact.
Chemours, as the inventor of Teflon, brings over 80 years of fluoro-polymer expertise, ensuring batch-to-batch consistency, reliable supply, and full technical support.
Typical Properties
| Property | 856G-114 Green | Unit / Remarks |
|---|---|---|
| Product Type | FEP Waterborne One-Coat Dip Coating | – |
| Color | Green | – |
| Carrier | Waterborne (aqueous dispersion) | – |
| Coating System | One-Coat System | No primer required |
| FDA Compliance | No | Per 21CFR |
| Conductivity | Anti-static | 10⁶ – 10¹² ohms/square |
| Coverage | 6.36 m²/kg (8.20 m²/L, 334 ft²/gal) | At 25 µm DFT |
| Viscosity | 1,300 – 2,300 cP | Brookfield RVT |
| Volume Solids | 10.32% | – |
| Weight Solids | 23 – 27% | – |
| Density | 1.16 kg/L (10.75 lbs/gal) | – |
| Max In-Use Temp. | 205°C (400°F) | – |
| Single Coat DFT | Up to 50 µm (2.0 mil) | Depends on dip speed |
| Max Total DFT | Up to 75 µm (3.0 mil) | – |
| Flash Point | Does not flash | SETA closed cup |
| Application Method | Dip Coating | – |
| Available Form | Liquid waterborne | Ready to use |
| Packaging | 4 kg, 5 kg, 20 kg pails | – |
| Shelf Life | 18 months | Unopened, proper storage |
Important Notes on Typical Data:
-
Values listed are typical and sourced from Chemours official data sheets. They do not constitute binding product specification.
-
Physical constants are averages only and may vary up to ±5% of the values shown.
-
Final performance depends on substrate preparation, application method, and curing conditions.
-
Chemours original TDS shall serve as definitive technical reference. Request the latest official TDS from our sales team.
Processing Guidelines
| Step | Process |
|---|---|
| Substrate | Carbon steel, stainless steel, aluminum, aluminized steel, other suitable substrates |
| Surface Preparation | Apply over a clean, roughened surface (recommended profile: Ra 3–4 μm / 0.1–0.2 mil) |
| Coating Preparation | Gently mix 15 minutes or more until contents are homogeneous. Set mixer speed to create a vortex while avoiding air entrapment. Use an axial flow impeller. Insufficient mixing can result in application defects |
| Filtering | 40 mesh (approx. 400 μm) stainless steel or nylon |
| Application | Dip Coating – Achieve up to 50 μm (2.0 mil) per coat depending on dip speed; total DFT up to 75 μm (3.0 mil) |
| Drying (Metal Temp.) | 20–30 minutes at 120–150°C (248–302°F); oven temperature must not exceed 150°C |
| Curing (Single Coat) | Ramp oven temperature from 125°C to 345°C (257°F to 653°F). Metal temperature should be 30 minutes in the range of 340–350°C (644–662°F). Important to keep the difference between metal and air temperature small to prevent bubbling |
| Curing (Multi-Coat – Max 2 Coats) | Ramp from 125°C to 290°C (257°F to 554°F); first coat: 15 minutes at 280–290°C (536–554°F); second coat: 30 minutes at 340–350°C (644–662°F). Total coats should not exceed 2 |
| Bath Maintenance | When not used, cover the bath to reduce evaporation. If viscosity increases due to evaporation, add water and gently mix back to initial viscosity. Daily mixing recommended |
| Thinning | Can be diluted with water, but this will reduce film thickness and product stability |
| Repair | If coating needs repair, sand with P80-120 sandpaper for thick coatings, P400 for thin coatings |
| Spark Test | Anti-static; spark test does not indicate the absence of voids |
| Cleaning | Water |
| Storage | Store in original, sealed containers in a cool, dry place away from direct sunlight. Protect from freezing |
Critical Processing Warnings:
-
One-Coat System: 856G-114 is a one-coat system that can be applied directly to smooth, clean metal surfaces without a primer.
-
Surface Preparation: Proper surface preparation is critical for adhesion. Ensure surfaces are clean, dry, and properly roughened (Ra 3–4 μm).
-
Mixing: Insufficient mixing can result in application defects. Mix for 15 minutes or more until homogeneous.
-
Dip Speed Control: Film thickness depends on dip speed. Adjust dip speed to achieve the desired DFT.
-
Temperature Control: Important to keep the difference between metal and air temperature small to prevent bubbling during curing.
-
Maximum Coats: Total coats should not exceed 2.
-
Freeze Protection: Waterborne products must be protected from freezing.
-
Shelf Life: 18 months in unopened, clean, dry storage.
Related Products
-
Explore Teflon PTFE Coatings – Browse all Teflon industrial coating options
-
850G-300 Clear – Teflon PTFE Acid Primer – Acid primer for PTFE, PFA, and FEP topcoat systems
-
953G-506 Dark Violet – FEP Waterborne Primer – FEP primer for multi-coat food contact systems
-
About Our Company – Learn more about our supply capabilities and quality assurance
External Reference
For authoritative information, please refer to the following official resources:
-
Chemours Official Website – Corporate headquarters and product portfolio overview
-
Teflon Industrial Coatings Product Center – Official technical literature and application guides
Technical Documents
| Document Type | Description & Source |
|---|---|
| Chemours Official TDS | Complete physical, thermal, and mechanical properties of 856G-114 Green, issued by Chemours original |
| Chemours Official SDS | GHS-compliant chemical safety documentation, original Chemours document |
| Chemours Distributor Authorization Certificate | Proof of our authorized-distributor qualification for Chemours Teflon series, available upon request |
| COA (Certificate of Analysis) | Batch-specific quality certification |
| Application & Usage Guide | Detailed application guidance for dip coating systems |
Request any document above by:
-
Email:
ruiqingchem@gmail.com -
Online form: Our contact page
We reply within one working business day. Please clearly state product (856G-114 Green) and document type you require.
FAQ
Q1: What is 856G-114 Green and what is it used for?
A: 856G-114 Green is a waterborne, one-coat FEP dip coating from the Teflon industrial coatings portfolio. It is a conductive, green coating that can be applied directly to smooth, clean metal surfaces without a primer. It is widely used for fasteners, automotive components, aerospace parts, and general industrial applications.
Q2: Is 856G-114 Green FDA compliant?
A: No. 856G-114 is not FDA compliant for food contact applications per 21CFR. It is suitable for non-food contact industrial applications.
Q3: Is primer required for 856G-114 Green?
A: No. 856G-114 is a one-coat system that can be applied directly to smooth, clean metal surfaces without the need for a primer.
Q4: What is the recommended application method for 856G-114 Green?
A: 856G-114 is specifically formulated for dip coating application. It can achieve up to 50 µm (2.0 mil) per coat depending on the dip speed.
Q5: What is the temperature range of 856G-114 Green?
A: The maximum in-use temperature is 205°C (400°F).
Q6: Is 856G-114 Green conductive?
A: Yes. 856G-114 provides anti-static properties with conductivity of 10⁶ – 10¹² ohms/square.
Q7: What is the recommended film build for 856G-114 Green?
A: Recommended DFT is up to 50 µm (2.0 mil) per coat, with total DFT up to 75 µm (3.0 mil).
Q8: What is the cure temperature for 856G-114 Green?
A: For single coat: ramp from 125°C to 345°C (257°F to 653°F), then hold metal temperature at 340–350°C (644–662°F) for 30 minutes.
Q9: What is the coverage of 856G-114 Green?
A: Coverage is 6.36 m²/kg (8.20 m²/L, 334 ft²/gal) at 25 µm DFT.
Q10: What is the shelf life of 856G-114 Green?
A: The shelf life is 18 months in unopened, proper storage. Protect from freezing.
Q11: What is the lead time for orders?
A: Regular orders ship within 7-10 working days after payment confirmation. Large-volume or urgent orders can be negotiated.
Q12: Can 856G-114 Green be diluted?
A: Yes, it can be diluted with water, but this will reduce film thickness and product stability.
CTA (Call to Action)
Ready to order 856G-114 Green?
To get a precise quotation and professional technical support, please share:
-
Required quantity (kg)
-
Destination port or delivery address
-
Target application (fasteners, automotive, aerospace, industrial, etc.)
-
Required film thickness and dip speed
-
Document requirement (TDS, SDS, COA, etc.)
Sample Policy:
-
Samples are for laboratory validation tests only, not for production use.
-
Buyer bears international sample-shipping freight.
-
If bulk-product performance deviates from sample reference, Chemours official TDS serves as the authoritative benchmark.
Take action now:
-
📧 Email Us –
ruiqingchem@gmail.com -
📝 Send Inquiry – Use our quick inquiry form
-
💬 Live Chat – Click the bottom-right chat widget to speak directly with our team
After-Sales Support
| Service | Details |
|---|---|
| Quality Inspection Period | All quality-related claims must be submitted within 7 working-days after delivery, supported by test data and photographic evidence. |
| Return / Exchange Policy | Confirmed product defects caused by our side trigger replacement or refund. Terms and conditions apply. |
| Logistics Damage | Report shipping damage directly to carrier immediately upon goods receipt. We assist with claim-document preparation. |
| Technical Support | Remote technical guidance available. On-site troubleshooting can be arranged upon special request. |
| Export Documentation | We supply commercial invoice, packing list, bill of lading, COA, and additional compliance certificates on request. |
Disclaimer
DISCLAIMER: All technical data is referenced from original Chemours typical values for 856G-114 Green. Our company acts as authorized distributor/trader rather than original manufacturer. Final performance depends on substrate preparation, application method, and curing conditions. Buyers shall independently validate product suitability for individual applications. Our firm bears no liability for coating failure caused by improper application or improper usage. Always reference the latest Chemours official TDS of 856G-114 Green as the definitive specification.
