描述
3M Fluorinert FC-3283 Electronic Fluid Low Viscosity Heat Transfer
Material: PFC (Perfluorocarbon)
Viscosity (25°C): 0.75 cSt
Boiling Point: 128°C
Pour Point: -65°C
Packing: 20 kg / drum
3M™ Fluorinert™ FC-3283 is a clear, colorless, thermally stable, fully-fluorinated electronic liquid. It is a high-purity perfluorocarbon (PFC) fluid with an ultra-low viscosity of 0.75 cSt at 25°C and a wide liquid range of -65°C to 128°C. As a primarily single-compound fluid, its composition does not shift or fractionate over time, ensuring consistent transport properties and minimal fluid loss. It is an ideal dielectric coolant for single-phase heat transfer applications, semiconductor manufacturing, and electronics cooling.
Fluorinert FC-3283 offers exceptional thermal stability and chemical inertness, making it compatible with most metals, plastics, and elastomers. Its outstanding dielectric properties — dielectric strength >40 kV, dielectric constant 1.9, and electrical resistivity 1×10¹⁵ ohm cm — provide reliable electrical insulation for high-voltage and sensitive electronic equipment. With zero ozone depletion potential, nonflammability, and negligible photochemical reactivity, FC-3283 delivers safe and reliable performance in demanding heat transfer and testing applications.
Genuine 3M Imported Stock and Technical Support
We supply stable spot inventory of genuine 3M Fluorinert FC-3283 electronic liquid. Official TDS, SDS, and batch COA documents are available for semiconductor, electronics cooling, and high-performance heat transfer applications.
Request Fluorinert FC-3283 Quotation, TDS, SDS, and Sample
Complete SDS, COA, and customs clearance documents available
Core Advantages of 3M Fluorinert FC-3283 Electronic Liquid
- Ultra-low viscosity: 0.75 cSt at 25°C — excellent flow characteristics for high-performance cooling and heat transfer
- Wide liquid range: -65°C to 128°C — suitable for both cryogenic and moderate temperature applications
- Single-compound composition — no fractionation or composition shift over time, stable performance
- High dielectric strength: >40 kV — reliable electrical insulation for high-voltage electronics
- Exceptional thermal stability — thermally stable and chemically inert for demanding environments
- Nonflammable — no flash point, safe operation in high-temperature applications
- Zero ozone depletion potential — environmentally responsible formulation
- Compatible with most materials — suitable for use with metals, plastics, and elastomers
Main Applications
- Semiconductor manufacturing — etchers, ion implanters, testers, wafer processing equipment
- Data center cooling — immersion cooling, liquid cooling for high-performance computing
- Power electronics — cooling of IGBT modules, inverters, and power conversion equipment
- Aviation electronics — avionics cooling, radar systems, electronic warfare equipment
- Electronics testing — inert reaction media, thermal testing, component characterization
- Medical equipment — MRI cooling, laser systems, diagnostic equipment
- Industrial heat transfer — thermal management systems, heat exchangers, chillers
Full Technical Parameters
| Property | Typical Value | Test Method |
| Material | Perfluorocarbon (PFC) | — |
| Appearance | Clear colorless liquid | Visual |
| Average Molecular Weight | 521 | — |
| Boiling Point (@1 atm) | 128°C | ASTM D1078 |
| Pour Point | -65°C | ASTM D97 |
| Liquid Density (25°C) | 1.82 g/cm³ | ASTM D891 |
| Kinematic Viscosity (25°C) | 0.75 cSt | ASTM D445 |
| Absolute Viscosity (25°C) | 1.4 cP | — |
| Liquid Specific Heat | 1100 J kg⁻¹ °C⁻¹ | — |
| Liquid Thermal Conductivity | 0.066 W m⁻¹ °C⁻¹ | — |
| Surface Tension | 14.6 dynes/cm | — |
| Refractive Index | 1.28 | — |
| Water Solubility | 7 ppmw | — |
| Dielectric Strength (0.1″ gap) | >40 kV | ASTM D877 |
| Dielectric Constant (@1 kHz) | 1.9 | ASTM D150 |
| Electrical Resistivity | 1×10¹⁵ ohm cm | ASTM D257 |
| Ozone Depletion Potential | 0 | — |
| Flash Point | None | — |
Note: All listed figures are typical values and may vary by production batch. Complete independent qualification testing is required before mass production deployment.
Handling and Storage Recommendations
| Storage Rules | Store sealed original containers in a dry, well-ventilated area away from heat sources and direct sunlight. |
| Shelf Life | 36 months from date of manufacture when stored in original packaging at 21°C and 50% RH. |
| Forbidden Environments | Avoid exposure to open flames, strong oxidizing agents, and reactive metal powders. |
| Operation Protection | Maintain adequate ventilation. Wear nitrile protective gloves and anti-splash safety goggles during handling. |
Official Technical Documentation
| Document Type | Document Introduction | Document Request |
| TDS | 3M Fluorinert FC-3283 original factory technical data sheet | Request TDS |
| SDS | Safety data sheet covering transport, storage, and handling guidelines | Request SDS |
| COA | Batch-specific certificate of analysis for incoming goods inspection | Request COA |
Frequently Asked Questions
What is the viscosity of Fluorinert FC-3283?
Fluorinert FC-3283 has a kinematic viscosity of 0.75 cSt at 25°C and an absolute viscosity of 1.4 cP. It is an ultra-low viscosity fluid ideal for high-performance heat transfer applications.
What is the operating temperature range of Fluorinert FC-3283?
Fluorinert FC-3283 has a liquid range of -65°C to 128°C, with a boiling point of 128°C and a pour point of -65°C, making it suitable for both cryogenic and moderate temperature heat transfer applications.
What applications is Fluorinert FC-3283 suitable for?
Fluorinert FC-3283 is ideal for semiconductor manufacturing (etchers, ion implanters, testers), data center cooling, high-performance computing, power electronics, aviation electronics, electronics testing, and as an inert reaction media.
Is Fluorinert FC-3283 flammable?
No. Fluorinert FC-3283 is nonflammable with no flash point, providing safe operation in high-temperature and electrically sensitive environments.
What is the dielectric strength of Fluorinert FC-3283?
Fluorinert FC-3283 has a dielectric strength greater than 40 kV (0.1 inch gap), a dielectric constant of 1.9, and electrical resistivity of 1×10¹⁵ ohm cm, making it an excellent dielectric fluid for electronics immersion cooling.
What is the shelf life of Fluorinert FC-3283?
Fluorinert FC-3283 has a shelf life of 36 months from the date of manufacture when stored in original packaging at 21°C and 50% relative humidity.
What technical documents are available for Fluorinert FC-3283?
We can provide TDS, SDS, and batch COA documents to support product evaluation, import clearance, and quality assurance requirements.
Related Fluorinert Series Fluids
Compare 3M Fluorinert electronic liquids for different heat transfer and application requirements.
| Product Grade | Viscosity (25°C) | Boiling Point | Pour Point | Dielectric Constant | Molecular Weight | Core Application |
| Fluorinert FC-3283 | 0.75 cSt | 128°C | -65°C | 1.9 | 521 | Ultra-low viscosity heat transfer |
| Fluorinert FC-40 | 2.2 cSt | 155°C | -57°C | 1.9 | 650 | General heat transfer |
| Fluorinert FC-70 | 14 cSt | 215°C | -25°C | 1.9 | 820 | High-temperature cooling |
Get 3M Fluorinert FC-3283 Bulk Pricing and Technical Support
We supply genuine 3M Fluorinert FC-3283 electronic liquid for semiconductor, data center cooling, and high-performance industrial applications. Contact us for bulk pricing, sample availability, technical documents, and application support.
Request Fluorinert FC-3283 Technical Details
Disclaimer: All technical data on this page are for general guidance only and are not product specifications. Buyers must carry out independent trials and verify suitability before bulk ordering. Actual values may vary between production lots.
