Hostaform XGC25-LW01 XAP – 25% Glass Reinforced Tribological POM-C

描述

Hostaform XGC25-LW01 XAP is a 25% glass fiber reinforced, tribologically modified POM‑C (Polyoxymethylene Copolymer) injection molding grade, genuinely manufactured by Celanese and imported as original product. As an authorized distributor and trader, we supply genuine material with full traceability and direct access to official Celanese technical documentation.

This unfilled acetal copolymer is reinforced with approximately 25% short glass fibers and features a tribological modification for sliding applications requiring low friction and wear. The “LW” designation indicates Low Wear, while “XAP” denotes Celanese’s low emission technology.

Hostaform XGC25-LW01 XAP is part of Celanese’s XGC series, which offers an enhanced balance of strength, stiffness, and toughness at low temperatures. The combination of glass fiber reinforcement and tribological modification makes this grade an ideal solution for demanding sliding and wear applications.

With regular stock availability, we support both trial orders and large‑volume bulk shipments for automotive, industrial, and precision engineering applications.

Key Features of Hostaform XGC25-LW01 XAP

• 25% Glass Fiber Reinforcement – Provides exceptional tensile modulus of 8100 MPa and tensile stress at break of 135 MPa

• Tribological Modification – Specially formulated for sliding applications requiring low friction and low wear

• Low Wear Resistance – “LW” designation indicates optimized wear performance for demanding tribological applications

• Low Emission Technology – XAP low emission technology; suitable for automotive interior applications with strict cabin air quality requirements

• Excellent Heat Resistance – Heat deflection temperature of 160°C at 1.8 MPa

• Good Impact Resistance – Charpy notched impact strength of 12.5 kJ/m² at 23°C

• Low Mold Shrinkage – Molding shrinkage: parallel 0.8%, normal 0.9%

• Low CLTE – Coefficient of linear thermal expansion: parallel 60 E-6/K, normal 110 E-6/K

• Very Low MVR – MVR of 1.5 cm³/10min (190°C/2.16kg)

• Heavy‑Metal Free – Environmentally friendly formulation

• Contains Release Agent – Facilitates easy demolding during processing

• Global Availability – Available globally through Celanese distribution network

Typical Applications for Hostaform XGC25-LW01 XAP

Explore our full range of engineering plastics solutions for more industry‑specific case studies. See also our full POM product portfolio .

Material Advantages of Hostaform XGC25-LW01 XAP

What makes Hostaform XGC25-LW01 XAP the preferred material for demanding sliding and wear applications? Below are its core practical advantages:

Tribological Modification for Low Friction & Wear
Hostaform XGC25-LW01 XAP features a tribological modification specifically designed for sliding applications requiring low friction and wear. The “LW” (Low Wear) designation indicates optimized wear performance, making it ideal for moving parts and sliding mechanisms.

High Stiffness & Strength for Structural Applications
With a tensile modulus of 8100 MPa and tensile stress at break of 135 MPa， this grade delivers exceptional structural performance. The 25% glass fiber reinforcement provides significantly increased stiffness and dimensional stability over unreinforced POM grades.

Excellent Heat Resistance
Heat deflection temperature of 160°C at 1.8 MPa ensures thermal stability during processing and service in elevated temperature environments, enabling use in applications where standard POM grades would deform.

Low Emission Technology for Automotive Interiors
The “XAP” designation indicates Celanese’s proprietary low emission technology, making it suitable for automotive interior applications with strict cabin air quality requirements.

Enhanced Balance of Strength, Stiffness & Toughness
Hostaform XGC25-LW01 XAP is part of Celanese’s XGC series, which offers an enhanced balance of strength, stiffness, and toughness at low temperatures. Compared to conventional glass fiber reinforced POM, the XGC series delivers superior mechanical performance.

Low & Balanced Shrinkage
Molding shrinkage of 0.8% parallel and 0.9% normal ensures consistent part dimensions and tight tolerances.

Excellent Chemical & Hydrolysis Resistance
Outstanding resistance to solvents, fuels, strong alkalis, hydrolysis, fatigue, creep, moisture, and stress cracking.

Heavy‑Metal Free
Environmentally friendly, heavy‑metal‑free formulation.

Batch‑to‑Batch Consistency
Celanese manufactures this grade under strict ISO quality standards for consistent property across shipments.

Reliable Supply
We maintain active inventory and stable supply chains for Hostaform XGC25-LW01 XAP. For more supply‑chain details, visit our company background page .

Typical Properties (ISO Standards)

Typical properties of Hostaform XGC25-LW01 XAP measured to ISO standards are listed below:

Important Notes on Typical Data:

1. Values listed are typical and sourced from Celanese official data sheets for Hostaform XGC25-LW01 XAP. They do not constitute binding product specification.

2. Batch‑to‑batch deviations may exist. For critical applications, validate performance with batch‑specific COA certificate.

3. Final part performance depends on component design, processing parameters and end‑use environment.

4. Celanese original TDS shall serve as definitive technical reference. Request the latest official Hostaform XGC25-LW01 XAP TDS from our sales team.

Processing Guidelines (Injection Molding)

Recommended processing parameters for Hostaform XGC25-LW01 XAP:

Critical Processing Warnings for Hostaform XGC25-LW01 XAP:

• Low Melt Flow Processing: With MVR of 1.5 cm³/10min， Hostaform XGC25-LW01 XAP is a low flow/high molecular weight grade. Ensure adequate injection pressure and mold temperature to achieve complete filling of complex parts.

• Drying: Drying is not normally required. If material has come into contact with moisture through improper storage or handling or through regrind use, drying may be necessary to prevent splay and odor problems.

• Low Emission Property: To maintain XAP low emission characteristics, avoid contamination and ensure proper processing conditions.

• Fiber Breakage & Tribological Performance: Avoid excessive screw speed or back pressure, as this can break glass fibers and compromise the tribological modification.

• Thermal Degradation Risk: POM‑based material can decompose under excessive heat and release formaldehyde vapors. Guarantee sufficient ventilation; avoid overly long barrel residence times.

• Material Purity Requirement: Strictly prevent cross‑contamination with other polymer grades. Contamination will degrade the glass-filled, tribological, and low emission properties.

• Regrind / Recycled Material Notice: We do not recommend adding regrind for this specialty grade. Reprocessing may compromise the glass fiber reinforcement, tribological modification, and XAP low emission characteristics. If regrind usage is mandatory, keep percentage below 10% and complete pre‑validation testing first.

• Storage Guidance: Store pellets in cool, dry conditions; keep sealed in original factory packaging whenever possible.

Related Products

• Explore Our Full POM Product Portfolio – Browse all POM copolymer and homopolymer grades we supply

• Glass Fiber Reinforced POM Grades – Discover other glass fiber reinforced grades for high-performance applications

• Tribological POM Grades – View grades with tribological modification for low friction and wear

• Low Emission POM (XAP Series) – Discover low VOC, low odor grades for automotive interior applications

• Hostaform XGC25 XAP – View the standard 25% glass reinforced grade (non-tribological)

• Hostaform XGC15-LW01 XAP – View the 15% glass reinforced tribological grade

• Hostaform XGC25 EF XAP2 – View the easy flow version (MVR 5)

• About Our Company – Learn more about our supply capabilities and quality assurance

Technical Documents

We provide complete supporting documentation for material selection and compliance verification.

Request any document above by:

• Email: ruiqingchem@gmail.com

• Online form: Our contact page

We reply within one working business day. Please clearly state material grade (Hostaform XGC25-LW01 XAP) and document type you require.

External Reference

For further authoritative information, please refer to the official Celanese Hostaform product portal and the latest material datasheets for Hostaform XGC25-LW01 XAP.

Key technical standards referenced in this document include:

• ISO 1043 / ISO 11469 – Resin identification and part marking

• ISO 1183 – Density measurement

• ISO 527-1/-2 – Tensile properties

• ISO 178 – Flexural properties

• ISO 179/1eU / 1eA – Charpy impact resistance

• ISO 75-1/-2 – Heat deflection temperature

• ISO 1133 – Melt volume-flow rate

• ISO 11357-1/-3 – Melting temperature

• ISO 294-4, 2577 – Mold shrinkage

• ISO 11359-1/-2 – Coefficient of linear thermal expansion

• VDA 275 – Automotive interior emission testing

• ISO 29988-POM-K,(GF25),EM,0-3 – Material identification

Our technical team can supply relevant standard excerpts for your engineering reference.

FAQ

Q1: What is Hostaform XGC25-LW01 XAP and what is it used for?
A: Hostaform XGC25-LW01 XAP is a 25% glass fiber reinforced, tribologically modified POM‑C (Polyoxymethylene Copolymer) injection molding grade. The “LW” designation indicates Low Wear, and “XAP” denotes Celanese’s low emission technology. It is widely used in automotive door systems (cams and plates), wiper systems (gears and housings), sunroofs (guide rails), steering systems (housings and brakes), HVAC components (levers, brackets), industrial machinery (gear housings, drive gears, conveyor linkages), appliances (gears, pulleys, housings), irrigation (meter housings), and other sliding/wear applications requiring low friction, low wear, and dimensional stability.

Q2: What does “XGC25-LW01 XAP” mean in the grade name?
A: XGC indicates the XGC series – Celanese’s glass fiber reinforced POM family offering an enhanced balance of strength, stiffness, and toughness at low temperatures. 25 refers to approximately 25% glass fiber content. LW stands for Low Wear – indicating tribological modification for low friction and wear applications. 01 is the specific grade variant. XAP denotes Celanese’s proprietary low emission technology.

Q3: What are the key mechanical properties of Hostaform XGC25-LW01 XAP?
A: Tensile modulus 8100 MPa, tensile stress at break 135 MPa, tensile strain at break 3.5%, flexural modulus 8000 MPa, Charpy notched impact strength 12.5 kJ/m² (23°C), Charpy impact strength 60 kJ/m² (23°C), melting temperature 166°C, and heat deflection temperature 160°C at 1.8 MPa.

Q4: What is the MVR of this material?
A: Melt‑volume‑flow‑rate equals 1.5 cm³/10min measured under 190°C / 2.16 kg test condition.

Q5: What makes this grade different from standard glass fiber reinforced POM grades?
A: Hostaform XGC25-LW01 XAP combines 25% glass fiber reinforcement with a tribological modification for low friction and low wear. It also features low emission technology (XAP) for automotive interior applications. The “LW” designation indicates optimized wear performance, making it specifically suited for demanding sliding applications where both structural strength and tribological performance are required. The XGC series offers an enhanced balance of strength, stiffness, and toughness at low temperatures.

Q6: Is this material suitable for automotive applications?
A: Yes. Hostaform XGC25-LW01 XAP is widely used in automotive door systems, wiper systems, sunroofs, steering systems, and HVAC components. The XAP low emission technology makes it suitable for automotive interior applications with strict cabin air quality requirements.

Q7: What is the heat deflection temperature of this material?
A: The heat deflection temperature at 1.8 MPa is 160°C, enabling use in elevated temperature environments.

Q8: What is the density of this material?
A: The density is 1520 kg/m³.

Q9: What is the mold shrinkage of this material?
A: Molding shrinkage is 0.8% parallel and 0.9% normal (ISO 294-4, 2577).

Q10: Is drying required before processing?
A: Drying is not normally required. If material has come into contact with moisture through improper storage or handling or through regrind use, drying may be necessary to prevent splay and odor problems. Recommended drying: 100°C for 3-4 hours.

Q11: What are recommended processing‑temperature windows?
A: Optimum melt temperature: 200°C; Melt temperature range: 190-210°C. Optimum mold temperature: 100°C; Mold temperature range: 80-120°C.

Q12: What is the recommended screw speed for processing?
A: Screw tangential speed should be ≤0.3 m/s to avoid fiber breakage.

Q13: What sustainable versions are available?
A: XGC25-LW01 XAP ECO-B is available as a sustainable version using a mass‑balance approach with biogenic feedstocks.

Q14: Can I buy this material and what is lead‑time?
A: Yes. Submit your inquiry via our quick inquiry form or email ruiqingchem@gmail.com, specify quantity, application and delivery address. Regular orders 1‑5 tons ship within 7‑10 working days after payment confirmation. Large‑volume or urgent orders can be negotiated separately.

Q15: What are limitations?
A: POM‑C does not resist strong mineral acids, powerful oxidizing agents, or continuous exposure to hot water >80°C. The glass fiber reinforced grade also has reduced impact strength and elongation compared to unreinforced grades and may be abrasive to molds and processing equipment. Consult our technical team for chemical‑compatibility data for your exact working environment.

CTA (Call to Action)

Ready to order Hostaform XGC25-LW01 XAP?

To get precise quotation and professional technical support, please share these details:

• Required quantity (kg or tons)

• Destination port or delivery address

• Target application and part brief (automotive, sliding components, gears, wear applications, etc.)

• Core performance requirements (low friction, low wear, high stiffness, low emission, etc.)

• Sustainable version preference (standard or ECO-B)

• Document requirement (TDS, SDS, VDA 275 emission report, tribological performance report, UL Yellow Card, etc.)

Sample Policy:

• Samples are for laboratory validation tests only, not for production use.

• Buyer bears international sample‑shipping freight.

• If bulk‑material performance deviates from sample reference, Celanese official TDS serves as authoritative benchmark.

Take action now:

• Send Inquiry – Use our quick inquiry form

• Email Us – ruiqingchem@gmail.com

• Live Chat – Click bottom‑right chat widget to speak directly with our team

After-Sales Support

Disclaimer

DISCLAIMER: All technical data is referenced from original Celanese typical values for Hostaform XGC25-LW01 XAP. Our company acts as authorized distributor/trader rather than original manufacturer. Final component performance depends on part geometry, processing setup and end‑use environment. Buyers shall independently validate material suitability for individual applications. Our firm bears no liability for finished‑part failure caused by improper design or improper processing. Always reference latest Celanese official TDS of Hostaform XGC25-LW01 XAP as definitive specification.