Hostaform SlideX C0304 XAP2 – Low Friction POM-C for Stick-Slip Noise Prevention

描述

Hostaform SlideX C0304 XAP2 is a tribologically modified POM‑C (Polyoxymethylene Copolymer) injection molding grade, genuinely manufactured by Celanese and imported as original product. As an authorized distributor and trader, we supply genuine material with full traceability and direct access to official Celanese technical documentation.

This unfilled acetal copolymer features Celanese’s proprietary SlideX tribological technology, providing excellent low friction and low wear under various conditions of sliding against plastics and metals. It is specifically designed for demanding applications that require prevention of audible noise caused by stick-slip phenomenon.

The “XAP2” designation indicates Celanese’s low emission technology, with emissions according to VDA 275 <5 mg/kg. The non-migrating tribological additive ensures consistent performance without compromising mechanical properties.

Hostaform SlideX C0304 XAP2 is a very hard and rigid, heavy-metal free POM copolymer grade that exhibits outstanding chemical resistance (solvents, fuels & strong alkalis), hydrolysis resistance, fatigue resistance, creep resistance, moisture resistance, and stress cracking resistance. It also exhibits toughness, good heat distortion temperature (90°C at 1.8 MPa), excellent resilience, and low moisture absorption. With regular stock availability, we support both trial orders and large‑volume bulk shipments for automotive, industrial, and consumer applications.

Key Features of Hostaform SlideX C0304 XAP2

• Tribological Modified – Celanese SlideX technology provides excellent low friction and low wear under various conditions of sliding against plastics and metals

• Stick-Slip Noise Prevention – Specifically designed for demanding applications requiring prevention of audible noise caused by stick-slip phenomenon

• Low Emission Technology – XAP2 low emission technology; emissions according to VDA 275 <5 mg/kg

• High Flow / Easy Processing – MVR of 24-26 cm³/10min (190°C/2.16kg)

• Good Stiffness – Tensile modulus of 2500-2600 MPa

• Good Strength – Tensile stress at yield of 56 MPa

• High Ductility – Nominal strain at break of 45%

• Excellent Unnotched Impact – Charpy impact strength of 150 kJ/m² at 23°C and 145 kJ/m² at -30°C

• Good Heat Resistance – Melting temperature of 166°C and heat deflection temperature of 90°C at 1.8 MPa

• Non-Migrating Tribo-Additive – Additive does not migrate, ensuring consistent long-term performance

• Dry Run Capability – Suitable for applications without external lubrication

• Heavy‑Metal Free – Environmentally friendly formulation

• Automotive OEM Compliant – Meets Mercedes-Benz DBL 5404 specification

Typical Applications for Hostaform SlideX C0304 XAP2

Explore our full range of engineering plastics solutions for more industry‑specific case studies. See also our full POM product portfolio .

Material Advantages of Hostaform SlideX C0304 XAP2

What makes Hostaform SlideX C0304 XAP2 the preferred material for low friction and noise-prevention applications? Below are its core practical advantages:

SlideX Tribological Technology for Friction & Noise Reduction
Hostaform SlideX C0304 XAP2 features Celanese’s proprietary SlideX tribological technology, providing low friction and low wear under various conditions of sliding against plastics and metals. The friction and wear performance is superior to standard POM, PET, PP, and steel. The non-migrating tribo-additive ensures consistent long-term performance.

Stick-Slip Noise Prevention for Silent Operation
Specifically designed for demanding applications requiring prevention of audible noise caused by stick-slip phenomenon. This makes it ideal for automotive interior components, gear shift systems, and other applications where quiet operation is critical. The material enables noise-free sliding friction.

Low Emission Technology for Automotive Interiors
The “XAP2” designation indicates Celanese’s proprietary low emission technology, with emissions according to VDA 275 <5 mg/kg. This makes it especially suitable for automotive interior applications with strict cabin air quality requirements.

Excellent Mechanical Performance
With a tensile modulus of 2500-2600 MPa, yield stress of 56 MPa, and nominal strain at break of 45%, Hostaform SlideX C0304 XAP2 delivers reliable structural performance. The high ductility allows parts to deform without fracturing under stress.

Outstanding Impact Resistance
Charpy impact strength of 150 kJ/m² at 23°C and 145 kJ/m² at -30°C, plus notched impact strength of 5.5 kJ/m², ensure excellent durability.

Good Heat Resistance
Melting temperature of 166°C and heat deflection temperature of 90°C at 1.8 MPa ensure thermal stability during processing and service.

Dry Run Capability
Suitable for applications without external lubrication, reducing maintenance requirements and eliminating contamination risks from lubricants.

Automotive OEM Compliant
Hostaform SlideX C0304 XAP2 meets Mercedes-Benz DBL 5404 specification, ensuring compliance with strict automotive OEM requirements.

Heavy‑Metal Free
Environmentally friendly, heavy‑metal‑free formulation.

Batch‑to‑Batch Consistency
Celanese manufactures this grade under strict ISO quality standards for consistent property across shipments.

Reliable Supply
We maintain active inventory and stable supply chains for Hostaform SlideX C0304 XAP2. For more supply‑chain details, visit our company background page .

Typical Properties (ISO Standards)

Typical properties of Hostaform SlideX C0304 XAP2 measured to ISO standards are listed below:

Important Notes on Typical Data:

1. Values listed are typical and sourced from Celanese official data sheets for Hostaform SlideX C0304 XAP2. They do not constitute binding product specification.

2. Batch‑to‑batch deviations may exist. For critical applications, validate performance with batch‑specific COA certificate.

3. Final part performance depends on component design, processing parameters and end‑use environment.

4. Celanese original TDS shall serve as definitive technical reference. Request the latest official Hostaform SlideX C0304 XAP2 TDS from our sales team.

Processing Guidelines (Injection Molding)

Recommended processing parameters for Hostaform SlideX C0304 XAP2:

Critical Processing Warnings for Hostaform SlideX C0304 XAP2:

• High Flow Processing: With MVR of 24-26 cm³/10min, Hostaform SlideX C0304 XAP2 is a high flow grade designed for rapid filling of complex cavities. Adjust cycle parameters to maximize throughput while maintaining part quality.

• Drying: Drying is not normally required. If material has come into contact with moisture through improper storage, drying at 100°C for 3-4 hours is recommended.

• Low Emission Property: To maintain XAP2 low emission characteristics (VDA 275 <5 mg/kg), avoid contamination and ensure proper processing conditions.

• Tribological Performance: The SlideX tribological additives are fully dispersed in the base resin; standard processing conditions will not degrade performance.

• Thermal Degradation Risk: POM‑based material can decompose under excessive heat and release formaldehyde vapors. Guarantee sufficient ventilation; avoid overly long barrel residence times. Max. melt temperature 210°C.

• Material Purity Requirement: Strictly prevent cross‑contamination with other polymer grades. Contamination will degrade the tribological and low emission properties.

• Regrind / Recycled Material Notice: We do not recommend adding regrind for this specialty grade. Reprocessing may compromise the tribological properties, noise prevention characteristics, and XAP2 low emission performance. If regrind usage is mandatory, keep percentage below 10% and complete pre‑validation testing first.

• Storage Guidance: Store pellets in cool, dry conditions; keep sealed in original factory packaging whenever possible to maintain low emission characteristics.

Related Products

• Explore Our Full POM Product Portfolio – Browse all POM copolymer and homopolymer grades we supply

• SlideX Tribological POM Grades – Discover other SlideX grades for low friction and noise prevention applications

• Low Emission POM (XAP2 Series) – Discover low VOC, low odor grades for automotive interior applications

• POM for Automotive Applications – View grades specifically suited for automotive interior components

• About Our Company – Learn more about our supply capabilities and quality assurance

Technical Documents

We provide complete supporting documentation for material selection and compliance verification.

Request any document above by:

• Email: ruiqingchem@gmail.com

• Online form: Our contact page

We reply within one working business day. Please clearly state material grade (Hostaform SlideX C0304 XAP2) and document type you require.

External Reference

For further authoritative information, please refer to the official Celanese Hostaform product portal and the latest material datasheets for Hostaform SlideX C0304 XAP2.

Key technical standards referenced in this document include:

• ISO 1043-1 / ISO 11469 – Resin identification and part marking

• ISO 1183 – Density measurement

• ISO 527-1/-2 – Tensile properties

• ISO 178 – Flexural properties

• ISO 179/1eU / 1eA – Charpy impact resistance

• ISO 75-1/-2 – Heat deflection temperature

• ISO 1133 – Melt volume-flow rate

• ISO 11357-1/-3 – Melting temperature

• ISO 294-4, 2577 – Mold shrinkage

• ISO 11359-1/-2 – Coefficient of linear thermal expansion

• ISO 2039-1 – Ball indentation hardness

• ISO 62 – Water/humidity absorption

• VDA 275 – Automotive interior emission testing

• Mercedes-Benz DBL 5404 – Automotive OEM specification

Our technical team can supply relevant standard excerpts for your engineering reference.

FAQ

Q1: What is Hostaform SlideX C0304 XAP2 and what is it used for?
A: Hostaform SlideX C0304 XAP2 is a tribologically modified POM‑C (Polyoxymethylene Copolymer) injection molding grade featuring Celanese’s proprietary SlideX technology. It provides excellent low friction and low wear under various conditions of sliding against plastics and metals. The “XAP2” designation indicates Celanese’s low emission technology with VDA 275 <5 mg/kg. It is widely used in automotive gear shift systems, interior components, seat belt systems, gears, bearings, fuel system components, electrical & electronics (connectors, switches, housings), medical devices, power tools, and consumer goods where low friction, noise prevention, and low emissions are critical.

Q2: What does “SlideX” and “XAP2” mean in the grade name?
A: SlideX is Celanese’s proprietary tribological technology that provides low friction and low wear under various conditions of sliding against plastics and metals, with a non-migrating tribo-additive. XAP2 denotes Celanese’s proprietary low emission technology for reduced VOC emissions and low odor, with emissions according to VDA 275 <5 mg/kg.

Q3: What makes this grade different from standard POM grades?
A: Hostaform SlideX C0304 XAP2 features SlideX tribological modification providing low friction and low wear against plastics and metals, and stick-slip noise prevention for silent operation. It also features low emission technology (VDA 275 <5 mg/kg) for automotive interior applications. The non-migrating tribo-additive ensures consistent long-term performance.

Q4: What are the key mechanical properties?
A: Tensile modulus 2500-2600 MPa, tensile stress at yield 56 MPa, nominal strain at break 45%, Charpy impact strength 150 kJ/m² (23°C) / 145 kJ/m² (-30°C), Charpy notched impact strength 5.5 kJ/m² (23°C and -30°C), melting temperature 166°C, and heat deflection temperature 90°C at 1.8 MPa.

Q5: What is the MVR of this material?
A: Melt‑volume‑flow‑rate equals 24-26 cm³/10min measured under 190°C / 2.16 kg test condition.

Q6: Is this material suitable for automotive applications?
A: Yes. Hostaform SlideX C0304 XAP2 features low emissions (VDA 275 <5 mg/kg), meets Mercedes-Benz DBL 5404 specification, and offers excellent tribological performance for automotive gear shift systems and interior components.

Q7: Does this material prevent noise?
A: Yes. Hostaform SlideX C0304 XAP2 is specifically designed for demanding applications requiring prevention of audible noise caused by stick-slip phenomenon. It enables noise-free sliding friction.

Q8: Can this material be used without external lubrication?
A: Yes. Hostaform SlideX C0304 XAP2 is suitable for dry run applications (without external lubrication), reducing maintenance requirements and eliminating contamination risks from lubricants.

Q9: Is drying required before processing?
A: Drying is not normally required. If material has come into contact with moisture through improper storage, drying at 100°C for 3-4 hours is recommended.

Q10: What are recommended processing‑temperature windows?
A: Zone 1 (rear) temperature: 170-175°C; Optimum melt temperature: 195°C; Melt temperature range: 180-210°C; Optimum mold temperature: 65°C.

Q11: What is the density of this material?
A: The density is 1400 kg/m³.

Q12: What sustainable versions are available?
A: ECO-B and ECO-C versions offer the same properties and performance but are produced with sustainability in mind. ECO-C incorporates circular content derived from captured carbon dioxide emissions through mass balance allocation. ECO-B uses biogenic feedstocks. Both are ISCC certified.

Q13: Can I buy this material and what is lead‑time?
A: Yes. Submit your inquiry via our quick inquiry form or email ruiqingchem@gmail.com, specify quantity, application and delivery address. Regular orders 1‑5 tons ship within 7‑10 working days after payment confirmation. Large‑volume or urgent orders can be negotiated separately.

Q14: What are limitations?
A: POM‑C does not resist strong mineral acids, powerful oxidizing agents, or continuous exposure to hot water >80°C. Consult our technical team for chemical‑compatibility data for your exact working environment.

CTA (Call to Action)

Ready to order Hostaform SlideX C0304 XAP2?

To get precise quotation and professional technical support, please share these details:

• Required quantity (kg or tons)

• Destination port or delivery address

• Target application and part brief (automotive, gear shift systems, low friction components, noise-sensitive parts, etc.)

• Core performance requirements (tribological performance, low emission, stick-slip prevention, etc.)

• Sustainable version preference (standard, ECO-B, or ECO-C)

• Document requirement (TDS, SDS, VDA 275 emission report, Mercedes-Benz DBL 5404 compliance, etc.)

Sample Policy:

• Samples are for laboratory validation tests only, not for production use.

• Buyer bears international sample‑shipping freight.

• If bulk‑material performance deviates from sample reference, Celanese official TDS serves as authoritative benchmark.

Take action now:

• Send Inquiry – Use our quick inquiry form

• Email Us – ruiqingchem@gmail.com

• Live Chat – Click bottom‑right chat widget to speak directly with our team

After-Sales Support

Disclaimer

DISCLAIMER: All technical data is referenced from original Celanese typical values for Hostaform SlideX C0304 XAP2. Our company acts as authorized distributor/trader rather than original manufacturer. Final component performance depends on part geometry, processing setup and end‑use environment. Buyers shall independently validate material suitability for individual applications. Our firm bears no liability for finished‑part failure caused by improper design or improper processing. Always reference latest Celanese official TDS of Hostaform SlideX C0304 XAP2 as definitive specification.