描述
Fomblin Y06 Very Low Viscosity PFPE Lubricant ISO VG 22
Material: PFPE (Perfluoropolyether)
Viscosity (40°C): 22.0 cSt
Viscosity Index: 73
ISO Grade: 22
Packing: 5 kg / drum
Fomblin Y06 is a very-low-viscosity perfluoropolyether (PFPE) lubricant within the Fomblin Y series. Produced by Syensqo, formerly Solvay, this fluid offers excellent high-temperature stability, good low-temperature properties, very good extreme pressure and wear characteristics, and low evaporative loss. It has a kinematic viscosity of 22.0 cSt at 40°C and 4.10 cSt at 100°C, classified as ISO VG 22 with a viscosity index of 73.
Fomblin Y06 is one of the lowest viscosity grades in the Fomblin Y series, making it particularly suitable for high-speed, low-friction applications requiring minimal fluid resistance. Its excellent EP and wear characteristics (Four Ball Wear Test 0.63 mm at 75°C, 1200 rpm, 40 kg) provide reliable protection for precision mechanical systems. The fluid features a pour point of -50°C and a low molecular weight of 2,400 amu, ensuring good low-temperature flow performance and rapid heat dissipation.
Genuine Syensqo Imported Stock and Technical Support
We supply stable spot inventory of genuine Syensqo Fomblin Y06 PFPE lubricant. Official TDS, SDS, and batch COA documents are available for high-speed bearing applications, precision instruments, and demanding industrial lubrication systems.
Request Fomblin Y06 Quotation, TDS, SDS, and Sample
Complete SDS, COA, and customs clearance documents available
Core Advantages of Fomblin Y06 PFPE Lubricant
- Very low viscosity: 22.0 cSt at 40°C — ideal for high-speed, low-friction applications
- ISO VG 22 viscosity grade — suitable for precision instruments and high-speed bearings
- Excellent extreme pressure and wear characteristics — Four Ball Wear Test 0.63 mm
- Excellent high-temperature stability — reliable performance at elevated operating temperatures
- Good low-temperature properties — -50°C pour point for cold-start applications
- Low molecular weight: 2,400 amu — rapid heat dissipation and low fluid friction
- High chemical resistance — inert to aggressive chemicals, solvents, acids, and bases
Main Applications
- High-speed bearings and precision instruments
- Small motors and high-speed spindles
- Vacuum pump oils for demanding industrial environments
- Compressor lubrication at elevated temperatures
- Chemical process equipment requiring inert lubrication
- ISO VG 22 lubrication systems requiring EP protection
Full Technical Parameters
| Property | Typical Value | Test Method |
| Base Material | Perfluoropolyether (PFPE) | — |
| Visual Appearance | Clear colorless to light yellow liquid | Visual |
| Density (20°C) | 1.88 g/cm³ | ASTM D4052 |
| Average Molecular Weight | 2,400 amu | GPC |
| Kinematic Viscosity (40°C) | 22.0 cSt | ASTM D445 |
| Kinematic Viscosity (100°C) | 4.10 cSt | ASTM D445 |
| Viscosity Index | 73 | ASTM D2270 |
| Pour Point | -50 °C | ASTM D97 |
| Surface Tension (20°C) | 21 dyne/cm | — |
| Evaporation Loss (120°C/22h) | 6.0 % | ASTM D2595 |
| Evaporation Loss (149°C/22h) | 20 % | ASTM D2595 |
| Four Ball Wear Test | 0.63 mm | ASTM D4172 |
| Approximate ISO Grade | 22 | — |
Note: All listed figures are typical values and may vary by production batch. Complete independent qualification testing is required before mass production deployment.
Handling and Storage Recommendations
| Storage Rules | Store sealed original containers in a dry, well-ventilated area away from heat sources and direct sunlight. |
| Forbidden Environments | Avoid exposure to open flames, strong oxidizing agents, and reactive metal powders. |
| System Design | Avoid mixing with other oil-based media. Maintain system cleanliness before filling. |
| Operation Protection | Maintain adequate ventilation. Wear nitrile protective gloves and anti-splash safety goggles during handling. |
Official Technical Documentation
| Document Type | Document Introduction | Document Request |
| TDS | Fomblin Y06 original factory technical data sheet | Request TDS |
| SDS | Safety data sheet covering transport, storage, and handling guidelines | Request SDS |
| COA | Batch-specific certificate of analysis for incoming goods inspection | Request COA |
Frequently Asked Questions
What is the viscosity of Fomblin Y06?
Fomblin Y06 has a kinematic viscosity of 22.0 cSt at 40°C and 4.10 cSt at 100°C. It is classified as ISO VG 22 with a viscosity index of 73.
How does Fomblin Y06 compare to Fomblin Y15?
Fomblin Y06 is the lowest viscosity grade in the Y series (22.0 cSt vs 13.0 cSt at 40°C for Y15), classified as ISO VG 22 versus Y15’s ISO VG 68. Y06 has a higher density (1.88 vs 1.89 g/cm³) and similar pour point (-50°C vs -45°C), making it suitable for applications requiring even lower fluid friction and faster heat dissipation.
What applications is Fomblin Y06 suitable for?
Fomblin Y06 is ideal for high-speed bearings, precision instruments, small motors, high-speed spindles, vacuum pumps, and chemical process applications requiring ISO VG 22 viscosity grade PFPE lubrication.
Is Fomblin Y06 chemically resistant?
Yes. Fomblin Y06 offers excellent chemical resistance and is inert to most aggressive chemicals, solvents, acids, and bases, making it suitable for demanding environments.
What is the pour point of Fomblin Y06?
Fomblin Y06 has a pour point of -50°C, providing good low-temperature flow performance for cold-start applications.
What technical documents are available for Fomblin Y06?
We can provide TDS, SDS, and batch COA documents to support product evaluation, import clearance, and quality assurance requirements.
Related Fomblin Y Series Lubricants
Compare Fomblin Y series lubricants for different viscosity and application requirements.
| Product Grade | Viscosity (40°C) | ISO Grade | Pour Point | Core Application |
| Fomblin Y06 | 22.0 cSt | 22 | -50°C | Very low viscosity, high-speed applications |
| Fomblin Y15 | 13.0 cSt | 68 | -45°C | Low viscosity + EP |
| Fomblin Y25 | 80.0 cSt | 100 | -35°C | High viscosity + EP |
| Fomblin YR | 345 cSt | 320 | -25°C | Ultra high viscosity, extremely low evaporation |
Get Fomblin Y06 Bulk Pricing and Technical Support
We supply genuine Syensqo Fomblin Y06 very low viscosity PFPE lubricant for high-speed and precision industrial applications. Contact us for bulk pricing, sample availability, technical documents, and application support.
Request Fomblin Y06 Technical Details
Disclaimer: All technical data on this page are for general guidance only and are not product specifications. Buyers must carry out independent trials and verify suitability before bulk ordering. Actual values may vary between production lots.
