描述
Micromax 00L1L 100mΩ Current Sensing Resistor Paste
Type: Current Sensing Paste
Pack: 100G / 1000G
Resistivity: 100mΩ/sq
Film Thickness: 18-22 μm
Firing: 850°C / 30 min
Shelf Life: 6 months
Micromax 00L1L delivers ultra-low resistance (100mΩ/sq) for current sensing applications — engineered for high productivity chip resistor manufacturing with tight resistance distribution and 850°C fast firing.
Micromax 00L1L is an ultra-low resistance thick film paste specifically developed for current sensing chip resistor applications. With a resistivity of 100mΩ/sq, this grade is designed for low resistance designs where precise current measurement is critical. The material offers tight resistance distribution, high productivity, and excellent printability for consistent manufacturing yields.
This resistor paste provides linear blend behavior with 0001L for resistance tuning flexibility. It is insensitive to firing profile and chip size variations, supporting robust production processes. Compatible with multiple termination systems including Micromax 5426, 5421E, 5418 Ag/Pd, and 5463 Ag pastes. The cadmium-free, nickel-free and phthalate-free formulation meets international environmental standards including RoHS and REACH. Standard packaging options are 100G and 1000G.
Genuine Micromax Imported Stock and Technical Support
We maintain stable inventory of authentic Micromax 00L1L 100mΩ current sensing resistor paste. Factory-original TDS and batch-specific COA can be provided upon request.
Request Sample, TDS & Quotation
Complete TDS, COA, and regulatory documentation available
Core Advantages of Micromax 00L1L
- 100mΩ ultra-low resistivity — designed for current sensing and low resistance applications
- High productivity — consistent yields for high-volume manufacturing
- Tight resistance distribution — reliable electrical performance across production runs
- Excellent printability — optimized for 18-22 μm dried film thickness
- Insensitive to firing profile and chip size — robust manufacturing performance
- Linear blend behavior — resistance tuning with 0001L
- Multiple termination compatible — validated for Ag/Pd and Ag systems
- RoHS, REACH compliant; Cadmium/Nickel/Phthalate free — satisfies global environmental regulations
Main Applications
- Current Sensing Resistors — ultra-low resistance current detection
- Chip Resistors — low resistance chip resistor mass production
- Hybrid Circuits — resistor networks requiring ultra-low resistance
- Surface Mount Devices — SMD resistor components for consumer and industrial electronics
Full Technical Parameters
| Property | Typical Value | Test / Reference |
| Product Type | Thick film chip resistor paste | — |
| Application | Current sensing, chip resistor manufacturing | — |
| Packaging Specification | 100G, 1000G | Standard packing |
| Resistivity | 100mΩ/sq | 500 sq geometry |
| Recommended Film Thickness | 18-22 μm | Dried thickness |
| Drying Temperature | 150°C | — |
| Firing Peak Temperature | 850°C | 10 min at peak, 30 min total |
| Hot TCR (25-125°C) | Available upon request | 500 sq geometry |
| Cold TCR (-55-25°C) | Available upon request | 500 sq geometry |
| Termination Compatibility | Micromax 5426, 5421E, 5418 Ag/Pd, 5463 Ag | — |
| Substrate Compatibility | 96% alumina | — |
| Blendability | Linear blend behavior with 0001L | — |
| Environmental Compliance | RoHS, REACH, Cadmium free, Nickel free, Phthalate free | — |
| Shelf Life | 6 months in unopened containers | — |
| Storage Temperature | 5-30°C | — |
Note: All listed values are typical and may vary by batch. Independent qualification testing is required prior to production use.
Recommended Processing Conditions
| Parameter | Recommended Value |
| Mixing Prior to Use | Slow gentle hand-stirring, 1-2 minutes |
| Optimal Printing Temperature | 20-23°C |
| Leveling | Allow to level at room temperature |
| Drying Temperature | 150°C |
| Dried Film Thickness | 18-22 μm |
| Firing Peak Temperature | 850°C |
| Total Firing Cycle | 30 minutes (10 min at peak) |
| Substrate | 96% alumina |
Handling and Storage Recommendations
| Storage Rules | Store in tightly sealed containers in clean, stable environment at 5-30°C. |
| Shelf Life | 6 months in unopened containers from date of shipment. |
| Pre-use Preparation | Thoroughly mix prior to use. Some settling may occur. |
| Thinning | Not normally required; use Micromax 8250(T) thinner sparingly for evaporative losses. |
Official Technical Documentation
| Document Type | Document Introduction | Document Request |
| TDS | Micromax 00L1L original factory technical data sheet | Request TDS |
| COA | Batch-specific certificate of analysis | Request COA |
| SDS | Safety Data Sheet for handling and storage | Request SDS |
Frequently Asked Questions
What is Micromax 00L1L?
Micromax 00L1L is a 100mΩ ultra-low resistance paste designed for current sensing chip resistor applications. It delivers high productivity, tight resistance distribution, and excellent printability for reliable manufacturing.
What is the resistivity of Micromax 00L1L?
Micromax 00L1L has an ultra-low resistivity of 100mΩ/sq, ideal for current sensing and low resistance chip resistor applications.
What is the recommended processing profile for Micromax 00L1L?
Recommended processing: allow to level at room temperature, dry at 150°C, then fire at 850°C peak for 10 minutes within a 30-minute total cycle.
What is the recommended film thickness for Micromax 00L1L?
Micromax 00L1L is optimized for 18-22 μm dried film thickness.
What terminations are compatible with Micromax 00L1L?
Micromax 00L1L is compatible with high silver terminations including Micromax 5426, 5421E, 5418 Ag/Pd, and 5463 Ag termination pastes.
Is Micromax 00L1L environmentally compliant?
Yes. Micromax 00L1L contains no intentionally added cadmium, nickel or phthalates, meeting RoHS and REACH environmental standards.
What packaging sizes are available for Micromax 00L1L?
Micromax 00L1L is supplied in 100G and 1000G containers. For larger volume requirements, please contact our sales team.
Get Micromax 00L1L Bulk Pricing and Technical Support
We supply genuine Micromax 00L1L 100mΩ current sensing resistor paste for electronic component manufacturing. Contact us for bulk pricing, sample availability, technical documents, and application support.
Inquire Bulk Price & Technical Support
Disclaimer: All technical data on this page are for general guidance only and are not product specifications. Buyers must carry out independent trials and verify suitability before bulk ordering. Actual values may vary between production lots.
