699N-205 Gray ETFE Waterborne High Build Topcoat pail from Teflon industrial coatings

699N-205 Gray – ETFE Waterborne High Build Topcoat for Industrial Applications

基础信息

品名
699N-205 Gray
牌号
699N-205 Gray
厂商
Chemours
材料类型
ETFE Waterborne High Build Topcoat
产品形态
Liquid – Waterborne (aqueous dispersion)
特点
Waterborne ETFE, high build / thick film up to 40 mils, gray finish, excellent chemical resistance and permeation resistance
分类： ,

描述

699N-205 Gray (also referred to as 699-205) is a waterborne 699N-205 Gray ETFE High Build Topcoat from Chemours‘ Teflon industrial coatings portfolio, genuinely manufactured by Chemours and imported as original product. As an authorized distributor and trader, we supply genuine material with full traceability and direct access to official Chemours technical documentation. For more product options and company information, please visit our website at https://szrqchem.com/.

699N-205 Gray is a waterborne ETFE (ethylene tetrafluoroethylene) topcoat specifically engineered for high build / thick film applications. ETFE is a thermoplastic copolymer of ethylene and tetrafluoroethylene. Although not fully fluorinated, ETFE has excellent chemical resistance and is the toughest of the fluoroplastics. This resin is extremely tough, abrasion resistant, and has excellent chemical resistance. ETFE is also an excellent electrical insulator and has good nonstick and low friction properties.

699N-205 is the liquid form of ETFE filled powder 532-6118. This coating is formulated with special blends of fluoroplastics and other high-performance resins to deliver unsurpassed thick film protection for the most demanding industrial applications. The coating is specially formulated to resist sagging in thick films, ensuring uniform coating quality even at high film builds. The gray pigmented finish provides a consistent industrial appearance while delivering superior protection against chemical corrosion and permeation.

699N-205 is FDA compliant for food contact applications per 21CFR when used in combination with a compliant layer and properly cured, making it suitable for food processing equipment, industrial bakeware, and other food‑contact uses. As a waterborne coating, it offers low VOC emissions, making it an environmentally responsible choice for modern industrial facilities.

With regular stock availability, we support both trial orders and large‑volume bulk shipments for heat exchangers, chemical processing equipment, semiconductor equipment, pharmaceutical manufacturing, and other demanding industrial applications.

Key Features of 699N-205 Gray ETFE Topcoat

  • Waterborne ETFE High Build Topcoat – Liquid form of ETFE filled powder 532-6118, offering cost‑effectiveness and application flexibility

  • High Build / Thick Film Capability – Film build per coat of 2.0 – 12.0 mil (50 – 305 µm); maximum total film build up to 40 mil (approx. 1,000 µm)

  • Sag Resistance in Thick Films – Specially formulated to resist sagging, ensuring uniform coating quality even at maximum film builds

  • Exceptional Permeation Resistance – Filled grade with high resistance against chemical permeation; ideal for applications requiring barrier protection

  • Extremely Tough & Abrasion Resistant – ETFE is the toughest of the fluoroplastics, providing superior mechanical strength and wear resistance

  • Excellent Chemical Resistance – Sintered coating forms a very dense, nonporous film with outstanding resistance to chemical corrosion; can tolerate 98% sulfuric acid and 30% sodium hydroxide

  • FDA Food Contact Compliant – FDA compliant for food contact applications per 21CFR when used with a compliant layer and properly cured

  • Gray Finish – Consistent industrial appearance with gray / pewter pigmented finish

  • High Temperature Resistance – Continuous service up to 149°C (300°F) with intermittent service up to 316°C (600°F)

  • Ultra-Low Surface Energy – Surface energy of 18-20 dynes/cm; only a few materials can effectively adhere

  • Ultra-Low Coefficient of Friction – Friction coefficient stabilizes between 0.05-0.20

  • Excellent Dielectric Strength – ETFE is an excellent electrical insulator with very good dielectric strength

  • Excellent Weatherability – Outdoor exposure 10+ years with >80% gloss retention

  • Broad Substrate Compatibility – Compatible with carbon steel, aluminum, stainless steel, steel alloys, brass, and magnesium

  • System Compatibility – Interchangeable and compatible with liquid and powder topcoats

Typical Applications for 699N-205 Gray

Industry Typical Components & Considerations
Heat Exchangers Heat exchanger surfaces – requires nonstick, corrosion protection, and thick film durability
Chemical Processing Reaction vessels, agitators, pipelines, pumps, tanks, valves – resists strong acids and alkalis, ensures equipment stability and service life
Semiconductor Equipment High‑purity components, circuit board baking trays – stable at high temperatures, no harmful substance release
Food Processing Bakeware, conveyor belts, cutting tools – FDA compliant, ensures easy release and cleaning
Pharmaceutical Manufacturing Pharmaceutical production equipment – requires high purity and chemical resistance
Plastic & Rubber Industry Rollers, shoe molds, rubber glove molds, tire molds – prevents sticking, extends mold life
Textile Industry Rollers for yarn sizing – prevents high‑viscosity chemical slurry adhesion
Medical Devices Surgical instruments, infusion tubes – reduces friction, improves durability
Aerospace Aircraft engine components, fuel system piping – stable performance in extreme environments
Power & Energy Production Power generation equipment – chemical resistance and high dielectric strength
Automatic Welding Equipment Welding fixtures and tooling – spatter resistance and easy cleaning
Automotive Components Carburetor shafts, linkage devices, cruise control parts – dry lubrication and corrosion resistance
Filtration Systems Coated filter elements – reduced fouling and improved flow
Cryogenic Applications Low-temperature components – maintains performance at -70°C to 149°C
Valve & Pump Components Industrial valves, pumps – corrosion protection and thick film durability

Material Advantages

699N-205 Gray ETFE Topcoat delivers:

  • Liquid Form of Filled ETFE – As the liquid equivalent of filled powder 532-6118, 699N-205 offers cost‑effectiveness and application flexibility for high build requirements

  • High Build Capability – Supports film build per coat of 2.0 – 12.0 mil (50 – 305 µm) with maximum total film thickness up to 40 mil (approx. 1,000 µm), providing enhanced abrasion resistance, corrosion protection, and extended service life

  • Exceptional Permeation Resistance – Filled grade formulation with high resistance against chemical permeation, making it ideal for chemical processing equipment, storage tanks, and other applications requiring barrier protection

  • Exceptional Toughness – ETFE is the toughest of the fluoroplastics, offering superior impact resistance and mechanical strength compared to PTFE, FEP, or PFA

  • Excellent Chemical Resistance – Forms a very dense, nonporous film with outstanding resistance to chemical corrosion; can tolerate 98% sulfuric acid and 30% sodium hydroxide

  • Food Safety – FDA compliant for food contact per 21CFR when used with a compliant layer, enabling use in food processing and food‑contact applications

  • Thermal Stability – Maintains performance at continuous service temperatures up to 149°C (300°F), with intermittent service up to 316°C (600°F)

  • High Dielectric Strength – Very good electrical insulation properties for electrical and semiconductor applications

  • Environmental Compliance – Waterborne carrier with low VOC emissions reduces environmental impact compared to solvent‑based alternatives

  • Ultra-Low Friction – Friction coefficient stabilizes between 0.05-0.20, with static friction reduced by over 70% compared to bare metal

  • Excellent Weatherability – Outdoor exposure 10+ years with >80% gloss retention

  • Broad Substrate Compatibility – Applicable to carbon steel, aluminum, stainless steel, steel alloys, brass, and magnesium

  • System Flexibility – Interchangeable and compatible with liquid and powder topcoats

Chemours, as the inventor of Teflon, brings over 80 years of fluoro‑polymer expertise, ensuring batch‑to‑batch consistency, reliable supply, and full technical support.

Typical Properties

Property 699N-205 Gray Unit / Remarks
Product Type ETFE Waterborne High Build Topcoat –
Color Gray / Pewter –
Carrier Waterborne (aqueous dispersion) Low VOC
Coating System Topcoat – High Build Must be used with primer
FDA Compliance Yes – Food Contact per 21CFR When used with compliant layer
CAS Number 25038-71-5 –
Coverage Approx. 22.0 m²/kg (110 ft²/gal) –
Max Continuous Service Temp. 149°C (300°F)
Intermittent Service Temp. Up to 316°C (600°F)
Cure Temperature 316°C (600°F)
Film Build per Coat 2.0 – 12.0 mil (50 – 305 µm)
Max Total Film Build 40 mil (approx. 1,000 µm) High Build
Surface Energy 18 – 20 dynes/cm
Coefficient of Friction 0.05 – 0.20
Chemical Resistance Excellent – resists 98% H₂SO₄, 30% NaOH
Weatherability (10 yrs) >80% gloss retention
Application Method Spray –
Packaging 4 kg, 5 kg, 10 kg, 20 kg pails –
Shelf Life 18-36 months Unopened, proper storage

Important Notes on Typical Data:

  • Values listed are typical and sourced from Chemours official data sheets. They do not constitute binding product specification.

  • Physical constants are averages only and may vary up to ±5% of the values shown.

  • Theoretical coverage at dry film thickness based on 100% application efficiency. It does not take normal production losses into account.

  • Final performance depends on substrate preparation, application method, and curing conditions.

  • Chemours original TDS shall serve as definitive technical reference. Request the latest official TDS from our sales team.

Processing Guidelines

Step Process
Substrate Carbon steel, aluminum, stainless steel, steel alloys, brass, magnesium
Surface Preparation Remove all grease and contaminants. Use organic solvents to dissolve grease and heat to approximately 400°C to volatilize, then grit blast to roughen the surface
Coating Preparation Mix thoroughly until homogeneous. Filter through appropriate mesh screen to prevent application defects
Primer Application Primer required – Recommended primer: 532-6405 Green Powder Primer. If powder primer is used with a complete powder system, efficiency is higher
Topcoat Application Apply 699N-205 Gray via conventional or HVLP spray
Spray Distance 20-30 cm from substrate
Film Build per Coat 2.0 – 12.0 mil (50 – 305 µm)
Max Total DFT 40 mil (approx. 1,000 µm)
Curing 316°C (600°F); cure time depends on part mass and film thickness
Storage Store in original, sealed containers in a cool, dry place away from direct sunlight. Protect from freezing
Shelf Life 18-36 months in unopened, clean, dry storage

Critical Processing Warnings:

  • Primer Required: 699N-205 is a topcoat and must be used with a compatible primer system. Recommended primer: 532-6405 Green Powder Primer.

  • Do Not Apply as Single Coat: This topcoat is designed for use with primer systems and should not be applied as a single coat system.

  • Surface Preparation: Proper surface preparation is critical for adhesion. Remove all grease and contaminants from the surface.

  • High Build Application: Supports film build per coat of 2.0 – 12.0 mil (50 – 305 µm) with max total 40 mil (1,000 µm). Adjust application parameters accordingly for thick film requirements.

  • System Compatibility: Interchangeable and compatible with liquid and powder topcoats.

  • Curing: Cure time and temperature depend on part mass and oven characteristics. Always verify with test pieces.

  • Freeze Protection: Waterborne products must be protected from freezing.

  • Storage: Store in original, sealed containers in a cool, dry place away from direct sunlight.

Related Products

Technical Documents

Document Type Description & Source
Chemours Official TDS Complete physical, thermal, and mechanical properties of 699N-205, issued by Chemours original
Chemours Official SDS GHS‑compliant chemical safety documentation, original Chemours document
Chemours Distributor Authorization Certificate Proof of our authorized‑distributor qualification for Chemours Teflon series, available upon request
FDA Compliance Declaration FDA food contact compliance statement per 21CFR
COA (Certificate of Analysis) Batch‑specific quality certification
Application & Usage Guide Detailed application guidance for ETFE waterborne high build topcoat systems

Request any document above by:

We reply within one working business day. Please clearly state product (699N-205 Gray) and document type you require.

FAQ

Q1: What is 699N-205 Gray and what is it used for?
A: 699N-205 Gray is a waterborne ETFE (ethylene tetrafluoroethylene) high build topcoat from the Teflon industrial coatings portfolio. It is the liquid form of ETFE filled powder 532-6118, specifically designed for high build / thick film applications with max total film build up to 40 mil (approx. 1,000 µm). It is widely used in heat exchangers, chemical processing equipment, semiconductor equipment, food processing, pharmaceutical manufacturing, power generation, aerospace, and general industrial applications.

Q2: Is 699N-205 Gray FDA compliant?
A: Yes. 699N-205 is FDA compliant for food contact applications per 21CFR when used in combination with a compliant layer and properly cured.

Q3: What makes 699N-205 different from other ETFE coatings?
A: 699N-205 is a waterborne liquid ETFE coating that is the liquid equivalent of filled powder 532-6118. It offers high build capability with film build per coat of 2.0 – 12.0 mil (50 – 305 µm) and max total film build of 40 mil (approx. 1,000 µm). It is specially formulated for thick film applications with excellent permeation resistance.

Q4: What is the difference between 699N-205 and 532-6118?
A: 699N-205 is the liquid form of ETFE filled powder 532-6118. 699N-205 offers the same high build capability and permeation resistance in a waterborne liquid format, which may offer advantages in application flexibility and cost‑effectiveness for certain manufacturing processes.

Q5: Is primer required for 699N-205 Gray?
A: Yes. 699N-205 is a topcoat and must be used with a compatible primer system. Recommended primer: 532-6405 Green Powder Primer.

Q6: What is the temperature range of 699N-205 Gray?
A: Continuous service up to 149°C (300°F) with intermittent service up to 316°C (600°F).

Q7: What is the recommended film build for 699N-205 Gray?
A: Film build per coat: 2.0 – 12.0 mil (50 – 305 µm); maximum total film build: 40 mil (approx. 1,000 µm).

Q8: What is the surface energy of 699N-205 Gray?
A: The coating surface energy is extremely low at 18-20 dynes/cm; only a few materials can effectively adhere.

Q9: What is the coefficient of friction of 699N-205 Gray?
A: The friction coefficient stabilizes between 0.05-0.20.

Q10: What substrates can 699N-205 Gray be applied to?
A: It can be applied to carbon steel, aluminum, stainless steel, steel alloys, brass, and magnesium.

Q11: Is 699N-205 Gray PFA or ETFE?
A: 699N-205 is ETFE (ethylene tetrafluoroethylene), not PFA. ETFE is a thermoplastic copolymer of ethylene and tetrafluoroethylene and is the toughest among fluoroplastics.

Q12: What is the CAS number of 699N-205 Gray?
A: The CAS number is 25038-71-5.

Q13: What is the shelf life of 699N-205 Gray?
A: The shelf life is 18-36 months in unopened, proper storage. Protect from freezing.

Q14: What is the lead time for orders?
A: Regular orders ship within 7‑10 working days after payment confirmation. Large‑volume or urgent orders can be negotiated.

CTA (Call to Action)

Ready to order 699N-205 Gray?

To get a precise quotation and professional technical support, please share:

  • Required quantity (kg)

  • Destination port or delivery address

  • Target application (heat exchangers, chemical processing, semiconductor, food processing, pharmaceutical, power generation, aerospace, etc.)

  • Required total film thickness (up to 40 mil / 1,000 µm)

  • Primer requirement (532-6405 Green Powder Primer recommended)

  • Document requirement (TDS, SDS, FDA compliance, COA, etc.)

Sample Policy:

  • Samples are for laboratory validation tests only, not for production use.

  • Buyer bears international sample‑shipping freight.

  • If bulk‑product performance deviates from sample reference, Chemours official TDS serves as the authoritative benchmark.

Take action now:

  • 📧 Email Us – ruiqingchem@gmail.com

  • 📝 Send Inquiry – Use our quick inquiry form

  • 💬 Live Chat – Click the bottom‑right chat widget to speak directly with our team

After‑Sales Support

Service Details
Quality Inspection Period All quality‑related claims must be submitted within 7 working‑days after delivery, supported by test data and photographic evidence.
Return / Exchange Policy Confirmed product defects caused by our side trigger replacement or refund. Terms and conditions apply.
Logistics Damage Report shipping damage directly to carrier immediately upon goods receipt. We assist with claim‑document preparation.
Technical Support Remote technical guidance available. On‑site troubleshooting can be arranged upon special request.
Export Documentation We supply commercial invoice, packing list, bill of lading, COA, and additional compliance certificates (e.g., FDA) on request.

Disclaimer

DISCLAIMER: All technical data is referenced from original Chemours typical values for 699N-205 Gray. Our company acts as authorized distributor/trader rather than original manufacturer. Final performance depends on substrate preparation, application method, and curing conditions. Buyers shall independently validate product suitability for individual applications. Our firm bears no liability for coating failure caused by improper application or improper usage. Always reference the latest Chemours official TDS of 699N-205 Gray as the definitive specification.

Technical Documents

Download technical data sheets, safety data sheets and certificates for this material.

TDS Files

Technical document available for review or download.

0 Files
No TDS file uploaded yet.

MSDS Files

Technical document available for review or download.

0 Files
No MSDS file uploaded yet.

相关产品