描述
856G-304 Green is a waterborne 856G-304 Green FEP Topcoat from Chemours‘ Teflon industrial coatings portfolio, genuinely manufactured by Chemours and imported as original product. As an authorized distributor and trader, we supply genuine material with full traceability and direct access to official Chemours technical documentation. For more product options and company information, please visit our website at https://szrqchem.com/.
This 856G-304 Green FEP Topcoat is a standard grade, food-grade waterborne FEP (fluorinated ethylene propylene) topcoat engineered as the final layer for multi‑coat FEP systems. FEP is a melt‑processable fluoropolymer that melts and flows during baking to form nonporous, smooth, and highly durable films. Its unique ability to melt and flow ensures a pinhole‑free, continuous coating that provides exceptional barrier protection. These multi-coat systems are commonly used in applications such as mold release that require nonstick properties.
The 856G-304 Green FEP Topcoat is FDA compliant for food contact applications per 21CFR, making it suitable for food processing equipment, industrial bakeware, and other food‑contact uses. It delivers outstanding nonstick release properties, excellent chemical resistance, and low friction characteristics. The green pigmented finish (closest RAL 6017) provides easy visual identification and consistent industrial appearance while offering superior protection.
856G-304 is part of Chemours‘ product line transition from 856G‑2xx to 856G‑3xx series. Specifically, 856G-304 replaces 856G-204 (Green) in the waterborne FEP coatings portfolio. The 856G‑3xx series offers improved performance and consistency, making it the recommended choice for new applications. The waterborne formulation offers low VOC emissions, making it an environmentally responsible choice for modern industrial facilities. With regular stock availability, we support both trial orders and large‑volume bulk shipments for food processing, mold release, chemical processing, and other demanding industrial applications.
Key Features of 856G-304 Green FEP Topcoat
-
FDA Food Contact Compliant – Food grade, approved for food contact applications per 21CFR, suitable for food processing equipment, bakeware, and other food‑contact uses.
-
Green Finish – Distinctive green pigmented finish (closest RAL 6017) for easy visual identification and consistent industrial appearance.
-
FEP Melt‑Flow Technology – FEP melts and flows during baking to form nonporous, pinhole‑free films, providing excellent barrier protection.
-
Excellent Non‑Stick Release – FEP‑based formulation provides outstanding release properties for food processing, mold release, and industrial applications.
-
Low Coefficient of Friction – Extremely low friction coefficient (0.05-0.20) reduces wear and enables smooth operation.
-
High Temperature Resistance – Continuous service up to 205°C (400°F) with excellent thermal stability.
-
Superior Chemical Resistance – Resists most acids, bases, and solvents; excellent chemical inertness.
-
Excellent Weatherability – Outdoor exposure 10+ years with >80% gloss retention.
-
High Dielectric Strength – Excellent electrical insulation properties.
-
Waterborne Formulation – Low VOC emissions, environmentally friendly processing, and safer handling for operators.
-
Broad Substrate Compatibility – Can be applied to carbon steel, aluminum, stainless steel, alloy steel, brass, magnesium, as well as non‑metallic materials including glass, fiberglass, and certain rubbers and plastics.
-
Extended Shelf Life – 24 months shelf life in unopened, proper storage—longer than previous 856G‑2xx series.
Typical Applications for 856G-304 Green
| Industry | Typical Components & Considerations |
|---|---|
| Food Processing | Food contact equipment, dough rollers, processing machinery – FDA compliant applications |
| Industrial Bakeware | Bread pans, sheet pans, baking molds – requires food‑grade nonstick coating |
| Mold Release | Injection molds, rubber molds, plastic molds – anti‑stick and extended mold life |
| Chemical Processing | Reactors, agitators, valves, pipes, containers – chemical resistance and anti‑stick |
| Heat Exchangers | Heat exchanger surfaces requiring nonstick and corrosion protection |
| Aerospace | Components requiring high‑performance fluoropolymer coatings |
| Office Automation | Copier, printer, facsimile rolls – nonstick, low‑friction surfaces |
| Packaging | Heat seal bars – nonstick and heat resistance |
| Textile Industry | Dryer cans, process rolls – release properties and easy cleaning |
| General Industrial | Components requiring FEP nonstick properties with green finish |
Material Advantages
The 856G-304 Green FEP Topcoat is a waterborne FEP topcoat that delivers:
-
Nonporous Film Formation – FEP melts and flows during baking to form nonporous, pinhole‑free films, providing excellent barrier protection against chemical and moisture ingress.
-
Exceptional Nonstick Performance – FEP‑based formulation provides outstanding release properties, reducing sticking and cleaning downtime. Coating surface energy is extremely low, with material adhesion less than 10% compared to uncoated surfaces.
-
Food Safety – FDA compliant for food contact per 21CFR, enabling use in food processing and food‑contact applications.
-
Wide Temperature Range – Maintains performance up to 205°C (400°F) with excellent thermal stability.
-
Chemical Inertness – Resistant to most acids, bases, and solvents; unaffected by harsh chemical environments.
-
Environmental Compliance – Waterborne carrier with low VOC emissions reduces environmental impact compared to solvent‑based alternatives.
-
Low Water Absorption – ≤ 0.010% water absorption (ASTM D570) ensures excellent barrier properties.
-
Broad Substrate Compatibility – Applicable to a wide range of metals and non‑metals, offering design flexibility.
-
Product Line Upgrade – Replaces 856G-204 with improved performance and consistency.
Chemours, as the inventor of Teflon, brings over 80 years of fluoro‑polymer expertise, ensuring batch‑to‑batch consistency, reliable supply, and full technical support.
Typical Properties
| Property | 856G-304 Green | Unit / Remarks |
|---|---|---|
| Product Type | FEP Waterborne Topcoat – Standard Grade | – |
| Color | Green | Closest RAL 6017 |
| Carrier | Waterborne (aqueous dispersion) | Low VOC |
| Coating System | Topcoat | Must be used with primer |
| FDA Compliance | Yes – Food Contact per 21CFR | |
| Coverage | 7.74 m²/kg (10.50 m²/L) (428 ft²/gal) | At 25 µm DFT |
| Viscosity | 300 – 800 cP | Brookfield RVT, Spindle 2 at 20 RPM/25°C |
| Volume Solids | 25.7 – 26.7% | |
| Weight Solids | 43.4 – 46.4% | |
| Density | 1.356 kg/L (11.4 lbs/gal) | |
| VOC Content (Europe) | 143.2 g/kg | |
| Flash Point | 46°C (115°F) | SETA closed cup |
| Continuous Service Temp. | 205°C (400°F) | |
| Cure Temperature | 371°C (700°F) | |
| Film Build per Coat | 0.6 mil (approx. 15.2 µm) | |
| Max Total Film Build | 5.0 mil (approx. 127 µm) | |
| Water Absorption | ≤ 0.010 % | ASTM D570 |
| Application Method | Spray | – |
| Available Form | Liquid waterborne | Ready to spray |
| Shelf Life | 24 months | Unopened, proper storage |
| CAS Number | 25067-11-2 |
Important Notes on Typical Data:
-
Values listed are typical and sourced from Chemours official data sheets. They do not constitute binding product specification.
-
Batch‑to‑batch deviations may exist (up to ±5% of the values shown).
-
Final performance depends on substrate preparation, application method, and curing conditions.
-
Chemours original TDS shall serve as definitive technical reference. Request the latest official TDS from our sales team.
Processing Guidelines
| Step | Process |
|---|---|
| Substrate | Carbon steel, aluminum, stainless steel, alloy steel, brass, magnesium, as well as non‑metallic materials including glass, fiberglass, and certain rubbers and plastics |
| Surface Preparation | Degrease then abrasive blasting to achieve proper surface profile for adhesion |
| Coating Preparation | Gently mix 15 minutes or more until contents are homogeneous. Set mixer speed to create a vortex while avoiding air entrapment. Use an axial flow impeller |
| Filtering | 200 mesh (approx. 74 μm) stainless steel or equivalent |
| Primer Application | 856G-304 must be used with compatible primer system. Unless explicitly noted, most Teflon industrial coatings require primer application |
| Topcoat Application | Apply 856G-304 Green topcoat via conventional or HVLP spray |
| Recommended DFT | Max 12 µm (approx. 0.5 mil) per coat |
| Curing | Bake at 371°C (700°F) . Cure time depends on part mass and oven characteristics |
| Storage | Store in original, sealed containers in a cool, dry place. Protect from freezing |
| Shelf Life | 24 months in unopened, clean, dry storage |
Critical Processing Warnings:
-
Primer Required: 856G-304 is a topcoat and must be used with a compatible primer system. Unless explicitly noted, most Teflon industrial coatings require primer application.
-
Surface Preparation: Proper surface preparation is critical for adhesion. Ensure surfaces are clean, dry, and properly roughened.
-
Filtering: Always filter through 200 mesh stainless steel screen to prevent application defects.
-
Mixing: Insufficient mixing can result in application defects. Mix for 15 minutes or more until homogeneous.
-
Curing: Cure time and temperature depend on part mass and oven characteristics. Always verify with test pieces.
-
Freeze Protection: Waterborne products must be protected from freezing.
-
Shelf Life: 24 months in unopened, clean, dry storage.
Related Products
-
Explore Teflon PTFE Coatings – Browse all Teflon industrial coating options
-
856G-300 Clear – FEP Waterborne Topcoat – Clear version of 856G-3xx series
-
856G-303 Black – FEP Waterborne Topcoat – Black version of 856G-3xx series
-
850G-300 Clear – Teflon PTFE Acid Primer – Acid primer for PTFE, PFA, and FEP topcoat systems
-
About Our Company – Learn more about our supply capabilities and quality assurance
External Reference
For authoritative information, please refer to the following official resources:
-
Chemours Official Website – Corporate headquarters and product portfolio overview
-
Teflon Industrial Coatings Product Center – Official technical literature and application guides
Technical Documents
| Document Type | Description & Source |
|---|---|
| Chemours Official TDS | Complete physical, thermal, and mechanical properties of 856G-304 Green, issued by Chemours original |
| Chemours Official SDS | GHS‑compliant chemical safety documentation, original Chemours document |
| Chemours Distributor Authorization Certificate | Proof of our authorized‑distributor qualification for Chemours Teflon series, available upon request |
| FDA Compliance Declaration | FDA food contact compliance statement per 21CFR |
| COA (Certificate of Analysis) | Batch‑specific quality certification |
| Application & Usage Guide | Detailed application guidance for FEP topcoat systems |
Request any document above by:
-
Email:
ruiqingchem@gmail.com -
Online form: Our contact page
We reply within one working business day. Please clearly state product (856G-304 Green) and document type you require.
FAQ
Q1: What is 856G-304 Green and what is it used for?
A: 856G-304 Green is a waterborne, food‑grade FEP topcoat from the Teflon industrial coatings portfolio. It provides excellent nonstick release, chemical resistance, and thermal stability up to 205°C (400°F). It is widely used in food processing equipment, industrial bakeware, mold release, chemical processing, and general industrial applications.
Q2: Is 856G-304 Green FDA compliant?
A: Yes. 856G-304 is FDA compliant for food contact applications per 21CFR.
Q3: What is the difference between 856G-304 and 856G-204?
A: 856G-304 is the upgraded replacement for 856G-204 (Green) in the waterborne FEP coatings line. Chemours is transitioning 856G-204 to 856G-304. 856G-304 offers improved performance and consistency.
Q4: What is the difference between 856G-304 and 856G-300?
A: Both are FEP waterborne topcoats in the 856G‑3xx series. 856G-300 is clear/transparent while 856G-304 features a green pigmented finish (RAL 6017) for easy visual identification.
Q5: What is the difference between 856G-304 and 856G-303?
A: 856G-303 is black (RAL 9004) and 856G-304 is green (RAL 6017) – the key difference is the color. Both share similar performance characteristics as standard grade FEP waterborne topcoats.
Q6: Is primer required for 856G-304 Green?
A: Yes. 856G-304 is a topcoat and must be used with a compatible primer system. Unless explicitly noted, most Teflon industrial coatings require primer application.
Q7: What is the temperature range of 856G-304 Green?
A: The continuous service temperature is 205°C (400°F) .
Q8: What is the recommended film build for 856G-304 Green?
A: Film build per coat is 0.6 mil (approx. 15.2 µm), with max total film build of 5.0 mil (approx. 127 µm). Recommended DFT: max 12 µm per coat.
Q9: What is the cure temperature for 856G-304 Green?
A: The cure temperature is 371°C (700°F) .
Q10: What is the coverage of 856G-304 Green?
A: Coverage is 7.74 m²/kg (10.50 m²/L, 428 ft²/gal) at 25 µm DFT.
Q11: What is the shelf life of 856G-304 Green?
A: The shelf life is 24 months in unopened, proper storage.
Q12: What is the lead time for orders?
A: Regular orders ship within 7‑10 working days after payment confirmation. Large‑volume or urgent orders can be negotiated.
CTA (Call to Action)
Ready to order 856G-304 Green?
To get a precise quotation and professional technical support, please share:
-
Required quantity (kg)
-
Destination port or delivery address
-
Target application (food processing, bakeware, mold release, chemical processing, etc.)
-
Primer requirement
-
Document requirement (TDS, SDS, FDA compliance, COA, etc.)
Sample Policy:
-
Samples are for laboratory validation tests only, not for production use.
-
Buyer bears international sample‑shipping freight.
-
If bulk‑product performance deviates from sample reference, Chemours official TDS serves as the authoritative benchmark.
Take action now:
-
📧 Email Us –
ruiqingchem@gmail.com -
📝 Send Inquiry – Use our quick inquiry form
-
💬 Live Chat – Click the bottom‑right chat widget to speak directly with our team
After‑Sales Support
| Service | Details |
|---|---|
| Quality Inspection Period | All quality‑related claims must be submitted within 7 working‑days after delivery, supported by test data and photographic evidence. |
| Return / Exchange Policy | Confirmed product defects caused by our side trigger replacement or refund. Terms and conditions apply. |
| Logistics Damage | Report shipping damage directly to carrier immediately upon goods receipt. We assist with claim‑document preparation. |
| Technical Support | Remote technical guidance available. On‑site troubleshooting can be arranged upon special request. |
| Export Documentation | We supply commercial invoice, packing list, bill of lading, COA, and additional compliance certificates (e.g., FDA) on request. |
Disclaimer
DISCLAIMER: All technical data is referenced from original Chemours typical values for 856G-304 Green. Our company acts as authorized distributor/trader rather than original manufacturer. Final performance depends on substrate preparation, application method, and curing conditions. Buyers shall independently validate product suitability for individual applications. Our firm bears no liability for coating failure caused by improper application or improper usage. Always reference the latest Chemours official TDS of 856G-304 Green as the definitive specification.
